Porsche 944 MOT Results
Registered in 198371.1% pass rate
from 90 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1983 cars and highlighted areas where the Porsche 944 is unusually good or bad.
-
14% fail on
Visibility
(130% worse than other 1983 cars)
- 13% fail on Washers (2 times worse than other 1983 cars)
- 3.3% fail on Wipers
-
14% fail on
Lamps, reflectors and electrical equipment
-
5.6% fail on
Headlamps
- 5.6% fail on Headlamp
- 4.4% fail on Stop lamp
-
4.4% fail on
Front and rear fog lamps
-
4.4% fail on
Rear fog lamp
- 4.4% fail on Rear fog lamp
-
4.4% fail on
Rear fog lamp
-
2.2% fail on
Headlamp aim
- 1.1% fail on Headlamp aim
- 1.1% fail on Headlamp aim not tested
- 2.2% fail on Registration plate lamp(s)
-
2.2% fail on
Electrical equipment
- 2.2% fail on Horn
-
1.1% fail on
Position lamps
- 1.1% fail on Position lamp
-
1.1% fail on
Direction indicators
-
1.1% fail on
Flashing type
- 1.1% fail on Individual direction indicators
-
1.1% fail on
Flashing type
-
5.6% fail on
Headlamps
-
12% fail on
Brakes
-
11% fail on
Brake performance
-
6.7% fail on
Service brake performance
-
6.7% fail on
Rbt
- 6.7% fail on Service brake performance
-
6.7% fail on
Rbt
- 2.2% fail on Brake performance not tested
-
2.2% fail on
Parking brake efficiency (sp)
- 2.2% fail on Rbt (sp)
-
1.1% fail on
Service Brake Efficiency (sp)
-
1.1% fail on
Rbt (sp)
- 1.1% fail on Service brake performance
-
1.1% fail on
Rbt (sp)
-
1.1% fail on
Parking brake performance
-
1.1% fail on
Rbt
- 1.1% fail on Parking brake performance
-
1.1% fail on
Rbt
-
6.7% fail on
Service brake performance
- 3.3% fail on Rigid brake pipes
-
1.1% fail on
Service brake pedal or hand lever
- 1.1% fail on Pedal
-
1.1% fail on
Parking brake control
- 1.1% fail on Lever
-
1.1% fail on
Hydraulic systems
- 1.1% fail on Brake fluid
-
1.1% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 1.1% fail on Hydraulic brake callipers
-
11% fail on
Brake performance
-
11% fail on
Suspension
- 7.8% fail on Component mounting prescribed areas
-
2.2% fail on
Suspension arms
- 2.2% fail on Ball joint
-
2.2% fail on
Anti-roll bars
- 1.1% fail on Pins and bushes
- 1.1% fail on Linkage attachment bracket and mounting
- 1.1% fail on Wheel bearings
- 1.1% fail on Shock absorbers
-
1.1% fail on
Macpherson strut
- 1.1% fail on Macpherson strut
-
7.8% fail on
Body, chassis, structure
-
3.3% fail on
Fuel system
- 1.1% fail on Hose
- 1.1% fail on Pipe
- 1.1% fail on Fuel cap/sealing device
-
2.2% fail on
Integral vehicle structure
- 2.2% fail on Integral vehicle structure condition
-
2.2% fail on
Doors
(5 times worse than other 1983 cars)
-
1.1% fail on
Front passenger's door
- 1.1% fail on Door condition
-
1.1% fail on
Other passenger's door
- 1.1% fail on Door condition
-
1.1% fail on
Front passenger's door
-
3.3% fail on
Fuel system
-
5.6% fail on
Steering
-
3.3% fail on
Steering gear
- 3.3% fail on Steering rack
-
2.2% fail on
Steering linkage components
-
2.2% fail on
Other components
(20 times worse than other 1983 cars)
- 1.1% fail on Steering component
- 1.1% fail on Steering linkage
-
2.2% fail on
Other components
(20 times worse than other 1983 cars)
- 1.1% fail on Steering wheel
-
3.3% fail on
Steering gear
-
4.4% fail on
Noise, emissions and leaks
-
4.4% fail on
Exhaust emissions
-
4.4% fail on
Spark ignition
- 4.4% fail on Non catalyst emissions
-
4.4% fail on
Spark ignition
-
1.1% fail on
Fluid leaks
- 1.1% fail on Engine oil leaks
-
4.4% fail on
Exhaust emissions
-
2.2% fail on
Tyres
- 1.1% fail on Condition
- 1.1% fail on Tread depth
-
1.1% fail on
Identification of the vehicle
- 1.1% fail on Registration plates
-
1.1% fail on
Speedometer and speed limiter
- 1.1% fail on Speedometer
-
1.1% fail on
Seat belts and supplementary restraint systems
-
1.1% fail on
Seat belts
- 1.1% fail on Prescribed areas
-
1.1% fail on
Seat belts
-
1.1% fail on
Road Wheels
- 1.1% fail on Attachment