Porsche 924 MOT Results

Registered in 1980
56.5% pass rate
from 62 tests in 2017
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1980 cars and highlighted areas where the Porsche 924 is unusually good or bad.

  • 26% fail on Lamps, Reflectors and Electrical Equipment
    • 8.1% fail on Headlamp aim
    • 8.1% fail on Horn (3 times worse than other 1980 cars)
    • 4.8% fail on Battery
    • 4.8% fail on Position lamps
      • 4.8% fail on Rear lamps
    • 3.2% fail on Headlamps
      • 3.2% fail on Headlamp
      • 1.6% fail on Headlamp defects which do require an aim check on retest
        • 1.6% fail on Main beam 'tell-tale'
    • 3.2% fail on Direction indicators
      • 3.2% fail on Flashing type
        • 1.6% fail on All direction indicators
        • 1.6% fail on Side repeaters
    • 1.6% fail on Registration plate lamp
    • 1.6% fail on Rear fog lamp
      • 1.6% fail on Fog lamp
    • 1.6% fail on Stop lamp
    • 1.6% fail on Hazard warning
      • 1.6% fail on Lamp
  • 19% fail on Exhaust, Fuel and Emissions (100% worse than other 1980 cars)
    • 15% fail on Emissions
    • 4.8% fail on Fuel system
      • 1.6% fail on Hose
      • 1.6% fail on Pipe
      • 1.6% fail on System
    • 3.2% fail on Exhaust system
  • 18% fail on Brakes
    • 11% fail on Hydraulic systems (2 times worse than other 1980 cars)
      • 8.1% fail on Components (2 times worse than other 1980 cars)
        • 6.5% fail on Hoses (4 times worse than other 1980 cars)
        • 3.2% fail on Pipes
      • 1.6% fail on Operation
      • 1.6% fail on Leaks
    • 6.5% fail on Brake performance
      • 4.8% fail on Parking brake performance
      • 3.2% fail on Front wheels
      • 3.2% fail on Rear wheels
      • 1.6% fail on Brake imbalance
    • 1.6% fail on Hub components
      • 1.6% fail on Brake calipers
  • 13% fail on Driver's view of the road
    • 13% fail on Washers
    • 1.6% fail on Windscreen
    • 1.6% fail on Wipers
  • 9.7% fail on Suspension
    • 4.8% fail on Wheel bearings
      • 3.2% fail on Front
      • 1.6% fail on Rear
    • 4.8% fail on Prescribed areas
      • 3.2% fail on Component mounting
      • 1.6% fail on Subframe mounting
    • 1.6% fail on Suspension arms
      • 1.6% fail on Pins/bushes/ball joints
  • 8.1% fail on Steering
    • 6.5% fail on Steering system
      • 3.2% fail on Steering rack
      • 3.2% fail on Track rod end
    • 1.6% fail on Steering control
      • 1.6% fail on Steering column
  • 6.5% fail on Tyres
    • 6.5% fail on Condition (5 times worse than other 1980 cars)
  • 3.2% fail on Seat Belts and Supplementary Restraint Systems
    • 3.2% fail on Seat belts
      • 1.6% fail on Condition
      • 1.6% fail on Prescribed areas
  • 3.2% fail on Body, Structure and General Items
    • 3.2% fail on Seats
      • 1.6% fail on Passengers
      • 1.6% fail on Drivers
  • 1.6% fail on Registration plates and VIN
    • 1.6% fail on Registration plate

Search Good Garages