Porsche 911 MOT Results
Registered in 198682.3% pass rate
from 316 tests in 2021
(39% better than other 1986 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1986 cars and highlighted areas where the Porsche 911 is unusually good or bad.
-
7.9% fail on
Lamps, reflectors and electrical equipment
(45% better than other 1986 cars)
-
3.5% fail on
Front and rear fog lamps
-
3.5% fail on
Rear fog lamp
- 3.5% fail on Rear fog lamp
-
3.5% fail on
Rear fog lamp
-
2.2% fail on
Headlamp aim
- 2.2% fail on Headlamp aim
-
1.9% fail on
Headlamps
- 1.6% fail on Headlamp
- 0.32% fail on Dipswitch
-
1.6% fail on
Direction indicators
-
1.6% fail on
Flashing type
- 1.3% fail on Individual direction indicators
- 0.32% fail on All direction indicators
- 0.32% fail on Side repeaters
-
1.6% fail on
Flashing type
-
0.95% fail on
Electrical equipment
- 0.63% fail on Horn
- 0.32% fail on Electrical wiring
- 0.32% fail on Battery(ies)
- 0.32% fail on Stop lamp
- 0.32% fail on Registration plate lamp(s)
-
3.5% fail on
Front and rear fog lamps
-
5.1% fail on
Visibility
- 4.1% fail on Washers
- 1.3% fail on Wipers
-
3.8% fail on
Brakes
(58% better than other 1986 cars)
-
3.5% fail on
Brake performance
-
1.6% fail on
Service brake performance
-
1.6% fail on
Rbt
- 1.3% fail on Service brake performance
- 0.63% fail on Service brake imbalance
-
1.6% fail on
Rbt
-
0.95% fail on
Service Brake Efficiency (sp)
-
0.95% fail on
Rbt (sp)
- 0.95% fail on Service brake performance
-
0.95% fail on
Rbt (sp)
-
0.95% fail on
Parking brake efficiency (sp)
- 0.95% fail on Rbt (sp)
-
0.32% fail on
Parking brake performance
-
0.32% fail on
Rbt
- 0.32% fail on Parking brake performance
-
0.32% fail on
Rbt
-
1.6% fail on
Service brake performance
-
0.32% fail on
Service brake pedal or hand lever
- 0.32% fail on Hand lever
-
0.32% fail on
Mechanical brake components
-
0.32% fail on
Brake linings and pads
- 0.32% fail on Brake pads
-
0.32% fail on
Brake linings and pads
-
3.5% fail on
Brake performance
-
2.8% fail on
Noise, emissions and leaks
-
2.5% fail on
Exhaust emissions
-
2.2% fail on
Spark ignition
- 1.3% fail on Non catalyst emissions
- 0.63% fail on Emissions not tested
- 0.32% fail on Catalyst emissions
-
0.32% fail on
Compression ignition
- 0.32% fail on Pre 01/07/2008 Turbo
-
2.2% fail on
Spark ignition
-
0.32% fail on
Noise suppression
- 0.32% fail on Sound deadening material
-
0.32% fail on
Fluid leaks
- 0.32% fail on Engine oil leaks
-
2.5% fail on
Exhaust emissions
-
2.2% fail on
Suspension
(72% better than other 1986 cars)
-
0.63% fail on
Suspension arms
- 0.32% fail on Attachment bracket and mounting
- 0.32% fail on Ball joint
-
0.63% fail on
Anti-roll bars
- 0.32% fail on Attachment bracket and mounting
- 0.32% fail on Linkage pins and bushes
- 0.32% fail on Wheel bearings
- 0.32% fail on Shock absorbers
- 0.32% fail on Component mounting prescribed areas
-
0.63% fail on
Suspension arms
-
1.9% fail on
Body, chassis, structure
(74% better than other 1986 cars)
-
0.63% fail on
Transmission
-
0.63% fail on
Drive shafts
- 0.63% fail on Joints
-
0.63% fail on
Drive shafts
-
0.32% fail on
Chassis
- 0.32% fail on Chassis condition
- 0.32% fail on Exhaust system
-
0.32% fail on
Doors
-
0.32% fail on
Front passenger's door
- 0.32% fail on Door condition
-
0.32% fail on
Front passenger's door
-
0.32% fail on
Seats
- 0.32% fail on Passenger's seat
-
0.63% fail on
Transmission
-
0.95% fail on
Identification of the vehicle
- 0.95% fail on Registration plates
-
0.95% fail on
Steering
(77% better than other 1986 cars)
-
0.63% fail on
Steering linkage components
- 0.63% fail on Track rod end
-
0.32% fail on
Steering gear
- 0.32% fail on Steering rack
- 0.32% fail on Steering column
-
0.63% fail on
Steering linkage components
-
0.63% fail on
Tyres
- 0.32% fail on Condition
- 0.32% fail on Tread depth
-
0.32% fail on
Speedometer and speed limiter
- 0.32% fail on Speedometer