Porsche 911 MOT Results
Registered in 198378.0% pass rate
from 186 tests in 2017
(33% better than other 1983 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1983 cars and highlighted areas where the Porsche 911 is unusually good or bad.
-
16% fail on
Lamps, Reflectors and Electrical Equipment
- 7.5% fail on Headlamp aim
-
7.0% fail on
Rear fog lamp
- 7.0% fail on Fog lamp
- 3.8% fail on Registration plate lamp
-
2.7% fail on
Headlamps
- 1.6% fail on Headlamp
-
0.54% fail on
Headlamp defects which don't require an aim check on retest
- 0.54% fail on Main beam 'tell-tale'
- 0.54% fail on Dipswitch
- 1.6% fail on Stop lamp
-
1.1% fail on
Direction indicators
-
1.1% fail on
Flashing type
- 0.54% fail on Individual lamps
- 0.54% fail on Side repeaters
-
1.1% fail on
Flashing type
- 1.1% fail on Horn
-
0.54% fail on
Position lamps
- 0.54% fail on Front lamps
-
7.5% fail on
Brakes
-
4.8% fail on
Brake performance
- 3.8% fail on Rear wheels
- 2.2% fail on Parking brake performance
- 1.6% fail on Front wheels
- 0.54% fail on Brake imbalance
- 0.54% fail on Brake performance not tested
-
1.6% fail on
Hydraulic systems
-
1.6% fail on
Components
- 1.1% fail on Hoses
- 0.54% fail on Pipes
-
1.6% fail on
Components
- 1.1% fail on Restricted movement
-
4.8% fail on
Brake performance
-
7.5% fail on
Driver's view of the road
- 6.5% fail on Washers
- 2.2% fail on Wipers
- 0.54% fail on Mirrors
-
3.8% fail on
Steering
-
2.2% fail on
Steering system
- 1.6% fail on Track rod end
- 0.54% fail on Steering arm
-
1.6% fail on
Steering control
- 1.1% fail on Steering wheel (6 times worse than other 1983 cars)
- 0.54% fail on Steering column
- 0.54% fail on Steering operation
-
2.2% fail on
Steering system
-
2.7% fail on
Suspension
(76% better than other 1983 cars)
-
1.1% fail on
Wheel bearings
- 1.1% fail on Front
-
0.54% fail on
Suspension arms
- 0.54% fail on Attachment
-
0.54% fail on
Anti-roll bars
- 0.54% fail on Attachment
-
0.54% fail on
Drive shafts
-
0.54% fail on
Any drive shaft which is part of the suspension
- 0.54% fail on Drive shafts
-
0.54% fail on
Any drive shaft which is part of the suspension
-
1.1% fail on
Wheel bearings
-
2.7% fail on
Exhaust, Fuel and Emissions
(69% better than other 1983 cars)
- 2.2% fail on Emissions
- 0.54% fail on Emissions not tested
-
2.2% fail on
Body, Structure and General Items
-
1.1% fail on
Doors
- 0.54% fail on Drivers
- 0.54% fail on Passengers front
- 0.54% fail on Body condition
-
0.54% fail on
Seats
- 0.54% fail on Drivers
-
1.1% fail on
Doors
-
1.1% fail on
Seat Belts and Supplementary Restraint Systems
-
1.1% fail on
Seat belts
- 0.54% fail on Requirements
- 0.54% fail on Prescribed areas
-
1.1% fail on
Seat belts
-
0.54% fail on
Tyres
- 0.54% fail on Condition