Porsche 911 MOT Results
Registered in 198267.5% pass rate
from 200 tests in 2017
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1982 cars and highlighted areas where the Porsche 911 is unusually good or bad.
-
27% fail on
Lamps, Reflectors and Electrical Equipment
-
12% fail on
Rear fog lamp
(130% worse than other 1982 cars)
- 11% fail on Fog lamp (150% worse than other 1982 cars)
- 0.50% fail on Switch
- 10% fail on Headlamp aim
- 4.5% fail on Registration plate lamp
-
4.5% fail on
Direction indicators
-
4.0% fail on
Flashing type
- 2.5% fail on All direction indicators
- 1.0% fail on Individual lamps
- 0.50% fail on Side repeaters
- 0.50% fail on Switch
-
0.50% fail on
Semaphore
- 0.50% fail on Tell tales
-
4.0% fail on
Flashing type
-
4.0% fail on
Headlamps
- 3.5% fail on Headlamp
- 0.50% fail on Dipswitch
-
3.5% fail on
Position lamps
- 2.0% fail on Front lamps
- 1.0% fail on Rear lamps
- 0.50% fail on All position lamps
- 2.5% fail on Horn
- 2.0% fail on Stop lamp
-
2.0% fail on
Hazard warning
- 1.0% fail on Lamp
- 1.0% fail on Tell tale
- 0.50% fail on Battery
- 0.50% fail on Headlamp aim not tested
-
12% fail on
Rear fog lamp
(130% worse than other 1982 cars)
-
8.0% fail on
Driver's view of the road
- 6.0% fail on Washers
- 1.0% fail on Wipers
- 0.50% fail on Bonnet
- 0.50% fail on Mirrors
-
6.5% fail on
Brakes
-
6.0% fail on
Brake performance
- 3.0% fail on Rear wheels
- 2.0% fail on Parking brake performance
- 1.5% fail on Front wheels
- 0.50% fail on Brake imbalance
- 0.50% fail on Service brake performance
-
0.50% fail on
Parking brake
- 0.50% fail on Condition
-
0.50% fail on
Hydraulic systems
-
0.50% fail on
Components
- 0.50% fail on Pipes
-
0.50% fail on
Components
-
6.0% fail on
Brake performance
-
6.0% fail on
Exhaust, Fuel and Emissions
- 4.5% fail on Emissions
- 1.0% fail on Exhaust system
-
1.0% fail on
Fuel system
- 1.0% fail on Cap
-
5.5% fail on
Suspension
-
2.0% fail on
Anti-roll bars
- 0.50% fail on Linkage pins/bushes/ball joints
- 0.50% fail on Pins/bushes/ball joints
- 0.50% fail on Attachment
- 0.50% fail on Linkage condition
-
1.5% fail on
Wheel bearings
- 1.0% fail on Front
- 0.50% fail on Rear
-
1.5% fail on
Drive shafts
-
1.0% fail on
Front drive shafts
- 1.0% fail on Constant velocity joints
-
0.50% fail on
Any drive shaft which is part of the suspension
- 0.50% fail on Drive shafts
-
1.0% fail on
Front drive shafts
-
0.50% fail on
Shock absorbers
- 0.50% fail on Condition
-
0.50% fail on
Prescribed areas
- 0.50% fail on Component mounting
-
2.0% fail on
Anti-roll bars
-
2.5% fail on
Body, Structure and General Items
-
1.5% fail on
Doors
- 1.0% fail on Drivers (6 times worse than other 1982 cars)
- 0.50% fail on Passengers front
-
1.0% fail on
Seats
- 1.0% fail on Drivers
- 0.50% fail on Body condition
-
1.5% fail on
Doors
-
2.0% fail on
Steering
-
1.5% fail on
Steering system
- 1.0% fail on Track rod end
-
0.50% fail on
Other components
- 0.50% fail on Steering component
-
0.50% fail on
Steering control
- 0.50% fail on Steering column
- 0.50% fail on Steering operation
-
1.5% fail on
Steering system
-
2.0% fail on
Tyres
- 1.0% fail on Condition
- 1.0% fail on Tread depth
-
2.0% fail on
Registration plates and VIN
- 2.0% fail on Registration plate
-
1.5% fail on
Road Wheels
- 1.5% fail on Attachment
-
0.50% fail on
Seat Belts and Supplementary Restraint Systems
-
0.50% fail on
Seat belts
- 0.50% fail on Prescribed areas
-
0.50% fail on
Seat belts