Perodua Kenari MOT Results

Registered in 2006

60.8% pass rate

from 51 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2006 cars and highlighted areas where the Perodua Kenari is unusually good or bad.

16% fail on Noise, emissions and leaks (150% worse than other 2006 cars)
- 16% fail on Exhaust emissions (160% worse than other 2006 cars)
  - 16% fail on Spark ignition (2 times worse than other 2006 cars)
    - 7.8% fail on Emissions not tested (9 times worse than other 2006 cars)
    - 3.9% fail on Catalyst emissions
    - 3.9% fail on Malfunction indicator lamp
    - 2.0% fail on Non catalyst emissions
12% fail on Tyres
- 5.9% fail on Condition
- 5.9% fail on Tread depth
9.8% fail on Brakes
- 5.9% fail on Mechanical brake components
  - 3.9% fail on Brake discs and drums
    - 3.9% fail on Brake discs
  - 2.0% fail on Brake linings and pads
    - 2.0% fail on Brake pads
- 5.9% fail on Brake performance
  - 5.9% fail on Service brake performance
    - 5.9% fail on Rbt
      - 3.9% fail on Service brake performance
      - 2.0% fail on Service brake imbalance
  - 2.0% fail on Service Brake Efficiency (sp)
    - 2.0% fail on Rbt (sp)
      - 2.0% fail on Service brake imbalance
  - 2.0% fail on Parking brake efficiency (sp)
    - 2.0% fail on Rbt (sp)
- 3.9% fail on Rigid brake pipes
- 2.0% fail on Parking brake control
  - 2.0% fail on Lever
9.8% fail on Visibility
- 7.8% fail on Wipers
- 2.0% fail on Washers
9.8% fail on Body, chassis, structure
- 9.8% fail on Exhaust system (2 times worse than other 2006 cars)
5.9% fail on Lamps, reflectors and electrical equipment
- 3.9% fail on Headlamp aim
  - 3.9% fail on Headlamp aim
- 2.0% fail on Registration plate lamp(s)
3.9% fail on Seat belts and supplementary restraint systems
- 3.9% fail on Seat belts
  - 2.0% fail on Prescribed areas
  - 2.0% fail on Condition
2.0% fail on Suspension
- 2.0% fail on Component mounting prescribed areas