Perodua Kenari MOT Results
Registered in 200461.5% pass rate
from 96 tests in 2017
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2004 cars and highlighted areas where the Perodua Kenari is unusually good or bad.
-
18% fail on
Lamps, Reflectors and Electrical Equipment
- 6.3% fail on Stop lamp
- 4.2% fail on Registration plate lamp
- 3.1% fail on Headlamp aim
-
2.1% fail on
Direction indicators
-
2.1% fail on
Flashing type
- 1.0% fail on Individual lamps
- 1.0% fail on Side repeaters
-
2.1% fail on
Flashing type
- 1.0% fail on Battery
-
1.0% fail on
Position lamps
- 1.0% fail on Rear lamps
-
10% fail on
Suspension
-
3.1% fail on
Prescribed areas
- 3.1% fail on Component mounting
-
2.1% fail on
Coil springs
- 2.1% fail on Condition
-
2.1% fail on
Wheel bearings
- 2.1% fail on Rear
-
1.0% fail on
Suspension arms
- 1.0% fail on Pins/bushes/ball joints
- 1.0% fail on Front suspension joints
-
1.0% fail on
Drive shafts
-
1.0% fail on
Front drive shafts
- 1.0% fail on Constant velocity joints
-
1.0% fail on
Front drive shafts
-
3.1% fail on
Prescribed areas
-
7.3% fail on
Tyres
- 6.3% fail on Tread depth
- 1.0% fail on Condition
-
7.3% fail on
Exhaust, Fuel and Emissions
- 5.2% fail on Exhaust system
- 5.2% fail on Emissions
-
7.3% fail on
Driver's view of the road
- 7.3% fail on Wipers
- 1.0% fail on Washers
-
6.3% fail on
Brakes
-
4.2% fail on
Hydraulic systems
-
4.2% fail on
Components
- 4.2% fail on Pipes
- 1.0% fail on Hoses
-
4.2% fail on
Components
-
2.1% fail on
Brake performance
- 1.0% fail on Brake imbalance
- 1.0% fail on Front wheels
-
1.0% fail on
Parking brake
- 1.0% fail on Condition
-
1.0% fail on
Hub components
- 1.0% fail on Brake pads
-
4.2% fail on
Hydraulic systems
-
3.1% fail on
Seat Belts and Supplementary Restraint Systems
-
3.1% fail on
Seat belts
- 3.1% fail on Prescribed areas
-
3.1% fail on
Seat belts
-
1.0% fail on
Steering
-
1.0% fail on
Steering system
- 1.0% fail on Track rod end
-
1.0% fail on
Steering system
-
1.0% fail on
Body, Structure and General Items
-
1.0% fail on
Vehicle structure
- 1.0% fail on Chassis
-
1.0% fail on
Vehicle structure
-
1.0% fail on
Registration plates and VIN
- 1.0% fail on Registration plate