Nissan Sunny MOT Results
Registered in 198855.9% pass rate
from 59 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1988 cars and highlighted areas where the Nissan Sunny is unusually good or bad.
-
15% fail on
Lamps, reflectors and electrical equipment
-
5.1% fail on
Headlamps
- 5.1% fail on Headlamp
-
3.4% fail on
Direction indicators
-
3.4% fail on
Flashing type
- 3.4% fail on Side repeaters
-
3.4% fail on
Flashing type
-
3.4% fail on
Front and rear fog lamps
-
3.4% fail on
Rear fog lamp
- 3.4% fail on Rear fog lamp
-
3.4% fail on
Rear fog lamp
- 3.4% fail on Registration plate lamp(s)
-
5.1% fail on
Headlamps
-
15% fail on
Suspension
- 8.5% fail on Component mounting prescribed areas
- 3.4% fail on Wheel bearings
-
3.4% fail on
Suspension arms
- 3.4% fail on Ball joint dust cover
-
3.4% fail on
Anti-roll bars
- 1.7% fail on Anti-roll bar
- 1.7% fail on Linkage
- 1.7% fail on Shock absorbers
-
1.7% fail on
Macpherson strut
- 1.7% fail on Macpherson strut
-
14% fail on
Brakes
-
12% fail on
Brake performance
-
8.5% fail on
Service brake performance
-
8.5% fail on
Rbt
- 8.5% fail on Service brake performance (2 times worse than other 1988 cars)
-
8.5% fail on
Rbt
-
5.1% fail on
Service Brake Efficiency (sp)
-
5.1% fail on
Rbt (sp)
- 3.4% fail on Service brake performance
- 3.4% fail on Service brake imbalance
-
5.1% fail on
Rbt (sp)
-
5.1% fail on
Parking brake efficiency (sp)
- 5.1% fail on Rbt (sp)
-
1.7% fail on
Parking brake performance
-
1.7% fail on
Rbt
- 1.7% fail on Parking brake performance
-
1.7% fail on
Rbt
-
8.5% fail on
Service brake performance
- 3.4% fail on Rigid brake pipes
-
1.7% fail on
Service brake pedal or hand lever
- 1.7% fail on Hand lever
-
1.7% fail on
Hydraulic systems
- 1.7% fail on Master cylinder
- 1.7% fail on Brake fluid
-
1.7% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 1.7% fail on Hydraulic brake cylinder
-
1.7% fail on
Mechanical brake components
-
1.7% fail on
Brake linings and pads
- 1.7% fail on Brake pads
-
1.7% fail on
Brake linings and pads
-
12% fail on
Brake performance
-
14% fail on
Body, chassis, structure
-
5.1% fail on
Integral vehicle structure
- 5.1% fail on Integral vehicle structure condition
-
5.1% fail on
Transmission
-
5.1% fail on
Drive shafts
- 5.1% fail on Joints
-
5.1% fail on
Drive shafts
- 1.7% fail on Exhaust system
-
1.7% fail on
Fuel system
- 1.7% fail on Tank
-
1.7% fail on
Body
- 1.7% fail on Body condition
-
5.1% fail on
Integral vehicle structure
-
10% fail on
Visibility
- 6.8% fail on Washers
- 3.4% fail on Wipers
-
5.1% fail on
Seat belts and supplementary restraint systems
-
5.1% fail on
Seat belts
- 3.4% fail on Prescribed areas
- 1.7% fail on Requirements
-
5.1% fail on
Seat belts
-
5.1% fail on
Noise, emissions and leaks
-
5.1% fail on
Exhaust emissions
-
5.1% fail on
Spark ignition
- 5.1% fail on Non catalyst emissions
-
5.1% fail on
Spark ignition
-
5.1% fail on
Exhaust emissions
-
5.1% fail on
Tyres
- 3.4% fail on Condition
- 1.7% fail on Tread depth
-
1.7% fail on
Steering
-
1.7% fail on
Steering gear
- 1.7% fail on Steering rack
-
1.7% fail on
Steering gear
-
1.7% fail on
Road Wheels
- 1.7% fail on Attachment