Nissan Micra MOT Results
Registered in 198960.5% pass rate
from 114 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1989 cars and highlighted areas where the Nissan Micra is unusually good or bad.
-
17% fail on
Lamps, reflectors and electrical equipment
-
7.0% fail on
Headlamps
- 7.0% fail on Headlamp
-
4.4% fail on
Direction indicators
-
4.4% fail on
Flashing type
- 2.6% fail on Individual direction indicators
- 2.6% fail on Side repeaters
-
4.4% fail on
Flashing type
-
3.5% fail on
Headlamp aim
- 3.5% fail on Headlamp aim
-
3.5% fail on
Front and rear fog lamps
-
3.5% fail on
Rear fog lamp
- 3.5% fail on Rear fog lamp
-
3.5% fail on
Rear fog lamp
-
3.5% fail on
Electrical equipment
- 2.6% fail on Battery(ies)
- 0.88% fail on Horn
-
0.88% fail on
Mandatory tell-tales
- 0.88% fail on Rear fog lamp tell-tale
-
7.0% fail on
Headlamps
-
15% fail on
Brakes
-
11% fail on
Brake performance
-
7.9% fail on
Service Brake Efficiency (sp)
(150% worse than other 1989 cars)
-
7.9% fail on
Rbt (sp)
(160% worse than other 1989 cars)
- 5.3% fail on Service brake performance (2 times worse than other 1989 cars)
- 4.4% fail on Service brake imbalance
-
7.9% fail on
Rbt (sp)
(160% worse than other 1989 cars)
-
1.8% fail on
Parking brake efficiency (sp)
- 1.8% fail on Rbt (sp)
-
0.88% fail on
Service brake performance
-
0.88% fail on
Rbt
- 0.88% fail on Service brake performance
- 0.88% fail on Service brake imbalance
-
0.88% fail on
Rbt
-
0.88% fail on
Parking brake performance
-
0.88% fail on
Rbt
- 0.88% fail on Parking brake performance
-
0.88% fail on
Rbt
-
7.9% fail on
Service Brake Efficiency (sp)
(150% worse than other 1989 cars)
- 1.8% fail on Rigid brake pipes
-
0.88% fail on
Service brake pedal or hand lever
- 0.88% fail on Hand lever
-
0.88% fail on
Parking brake control
- 0.88% fail on Lever
-
0.88% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 0.88% fail on Hydraulic brake cylinder
-
0.88% fail on
Mechanical brake components
-
0.88% fail on
Brake linings and pads
- 0.88% fail on Brake pads
-
0.88% fail on
Brake linings and pads
-
11% fail on
Brake performance
-
14% fail on
Suspension
- 6.1% fail on Component mounting prescribed areas
- 2.6% fail on Shock absorbers (4 times worse than other 1989 cars)
-
2.6% fail on
Suspension arms
- 2.6% fail on Pins and bushes
- 1.8% fail on Wheel bearings
-
0.88% fail on
Macpherson strut
- 0.88% fail on Pins and bushes
-
5.3% fail on
Visibility
- 3.5% fail on Wipers
- 2.6% fail on Washers
-
5.3% fail on
Body, chassis, structure
-
2.6% fail on
Integral vehicle structure
- 2.6% fail on Integral vehicle structure condition
- 0.88% fail on Exhaust system
- 0.88% fail on Bumpers
-
0.88% fail on
Transmission
-
0.88% fail on
Drive shafts
- 0.88% fail on Joints
-
0.88% fail on
Drive shafts
-
2.6% fail on
Integral vehicle structure
-
4.4% fail on
Seat belts and supplementary restraint systems
-
4.4% fail on
Seat belts
- 3.5% fail on Prescribed areas
- 0.88% fail on Condition
-
4.4% fail on
Seat belts
-
3.5% fail on
Noise, emissions and leaks
-
3.5% fail on
Exhaust emissions
-
3.5% fail on
Spark ignition
- 2.6% fail on Non catalyst emissions
- 0.88% fail on Emissions not tested
-
3.5% fail on
Spark ignition
-
3.5% fail on
Exhaust emissions
-
3.5% fail on
Tyres
- 2.6% fail on Tread depth
- 0.88% fail on Size/type
- 0.88% fail on Condition
-
1.8% fail on
Road Wheels
(7 times worse than other 1989 cars)
- 0.88% fail on Condition
- 0.88% fail on Attachment
-
0.88% fail on
Steering
-
0.88% fail on
Steering linkage components
- 0.88% fail on Steering arm
-
0.88% fail on
Steering linkage components