Nissan Juke MOT Results

Registered in 2012
70.7% pass rate
from 28,138 tests in 2020
(12% worse than other 2012 cars)
Pass rate by mileage
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Nissan Juke is unusually good or bad.

  • 9.8% fail on Suspension (51% worse than other 2012 cars)
    • 8.4% fail on Suspension arms (3 times worse than other 2012 cars)
      • 7.5% fail on Ball joint (6 times worse than other 2012 cars)
      • 0.86% fail on Pins and bushes
      • 0.22% fail on Ball joint dust cover
      • 0.036% fail on Suspension arm
      • 0.0071% fail on Attachment bracket and mounting
    • 0.84% fail on Anti-roll bars
      • 0.43% fail on Linkage ball joints
      • 0.16% fail on Linkage ball joint dust cover
      • 0.10% fail on Ball joint
      • 0.096% fail on Ball joint dust cover
      • 0.025% fail on Linkage pins and bushes
      • 0.021% fail on Linkage
      • 0.011% fail on Anti-roll bar
      • 0.0071% fail on Pins and bushes
      • 0.0036% fail on Linkage attachment bracket and mounting
    • 0.46% fail on Springs (84% better than other 2012 cars)
      • 0.46% fail on Coil springs (84% better than other 2012 cars)
        • 0.45% fail on Coil spring (84% better than other 2012 cars)
        • 0.018% fail on Mounting
    • 0.38% fail on Other suspension component (2 times worse than other 2012 cars)
      • 0.35% fail on Ball joint (5 times worse than other 2012 cars)
      • 0.014% fail on Ball joint dust cover
      • 0.011% fail on Other suspension component
      • 0.0071% fail on Pins and bushes
      • 0.0036% fail on Attachment bracket and mounting
    • 0.057% fail on Wheel bearings (76% better than other 2012 cars)
    • 0.043% fail on Shock absorbers (94% better than other 2012 cars)
    • 0.032% fail on Macpherson strut
      • 0.011% fail on Macpherson strut
      • 0.011% fail on Attachment bracket and mounting
      • 0.0071% fail on Ball joint
      • 0.0036% fail on Pins and bushes
    • 0.032% fail on Suspension rods
      • 0.021% fail on Ball joint (2 times worse than other 2012 cars)
      • 0.0036% fail on Suspension rod
      • 0.0036% fail on Pins and bushes
      • 0.0036% fail on Ball joint dust cover
    • 0.025% fail on Sub-frames
      • 0.018% fail on Ball joint (9 times worse than other 2012 cars)
      • 0.0071% fail on Pins and bushes
    • 0.0036% fail on Axles
      • 0.0036% fail on Axle
  • 8.2% fail on Visibility (95% worse than other 2012 cars)
    • 5.7% fail on Wipers (150% worse than other 2012 cars)
    • 2.5% fail on Washers (43% worse than other 2012 cars)
    • 0.15% fail on Driver's view
    • 0.082% fail on Condition of glass
      • 0.082% fail on Windscreen
    • 0.082% fail on View to rear
      • 0.075% fail on Mirrors
      • 0.0071% fail on Indirect vision devices
    • 0.068% fail on Bonnet
  • 6.9% fail on Brakes (30% worse than other 2012 cars)
    • 4.5% fail on Mechanical brake components (49% worse than other 2012 cars)
      • 4.1% fail on Brake linings and pads (66% worse than other 2012 cars)
        • 4.1% fail on Brake pads (66% worse than other 2012 cars)
        • 0.014% fail on Brake linings
      • 0.70% fail on Brake discs and drums
        • 0.69% fail on Brake discs
        • 0.0036% fail on Brake drums
    • 1.2% fail on ABS / EBS / ESC (4 times worse than other 2012 cars)
      • 1.2% fail on Electronic stability control (8 times worse than other 2012 cars)
      • 0.10% fail on Anti-lock braking system
    • 0.97% fail on Brake performance (48% better than other 2012 cars)
      • 0.63% fail on Service brake performance (41% better than other 2012 cars)
        • 0.61% fail on Rbt (40% better than other 2012 cars)
          • 0.38% fail on Service brake performance (55% better than other 2012 cars)
          • 0.25% fail on Service brake imbalance
        • 0.011% fail on Plate brake tester
          • 0.0071% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
          • 0.0036% fail on Service brake performance
      • 0.17% fail on Parking brake efficiency (sp) (74% better than other 2012 cars)
        • 0.17% fail on Rbt (sp) (72% better than other 2012 cars)
      • 0.13% fail on Service Brake Efficiency (sp) (51% better than other 2012 cars)
        • 0.13% fail on Rbt (sp) (51% better than other 2012 cars)
          • 0.085% fail on Service brake imbalance (53% better than other 2012 cars)
          • 0.057% fail on Service brake performance (47% better than other 2012 cars)
        • 0.0036% fail on Plate brake tester (sp)
          • 0.0036% fail on Service brake performance
      • 0.064% fail on Brake performance not tested
      • 0.053% fail on Parking brake performance (82% better than other 2012 cars)
        • 0.050% fail on Rbt (82% better than other 2012 cars)
          • 0.028% fail on Parking brake performance (88% better than other 2012 cars)
          • 0.021% fail on Parking (secondary brake performance)
        • 0.0036% fail on Decelerometer
          • 0.0036% fail on Parking (secondary brake performance)
    • 0.54% fail on Rigid brake pipes (130% worse than other 2012 cars)
    • 0.089% fail on Parking brake control (58% better than other 2012 cars)
      • 0.089% fail on Lever (49% better than other 2012 cars)
    • 0.075% fail on Flexible brake hoses
    • 0.071% fail on Service brake pedal or hand lever (61% better than other 2012 cars)
      • 0.053% fail on Hand lever (51% better than other 2012 cars)
      • 0.018% fail on Pedal (76% better than other 2012 cars)
    • 0.043% fail on Hydraulic systems
      • 0.028% fail on Brake fluid
      • 0.014% fail on Reservoirs
    • 0.039% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.036% fail on Hydraulic brake callipers
      • 0.0036% fail on Hydraulic brake cylinder
    • 0.0071% fail on Other components and prescribed areas
      • 0.0071% fail on Other components
  • 5.5% fail on Lamps, reflectors and electrical equipment (40% better than other 2012 cars)
    • 1.6% fail on Headlamp aim (33% better than other 2012 cars)
      • 1.5% fail on Headlamp aim (30% better than other 2012 cars)
      • 0.057% fail on Headlamp aim not tested (67% better than other 2012 cars)
    • 1.2% fail on Stop lamp (31% better than other 2012 cars)
    • 1.2% fail on Position lamps
      • 1.2% fail on Position lamp
      • 0.021% fail on All position lamps
    • 0.80% fail on Headlamps (61% better than other 2012 cars)
      • 0.78% fail on Headlamp (60% better than other 2012 cars)
      • 0.025% fail on Headlamp levelling device
    • 0.75% fail on Registration plate lamp(s) (44% better than other 2012 cars)
    • 0.21% fail on Electrical equipment
      • 0.15% fail on Horn
      • 0.060% fail on Battery(ies)
      • 0.0036% fail on Electrical wiring
    • 0.15% fail on Front and rear fog lamps (53% better than other 2012 cars)
      • 0.15% fail on Rear fog lamp (53% better than other 2012 cars)
        • 0.14% fail on Rear fog lamp (53% better than other 2012 cars)
        • 0.0036% fail on Switch
    • 0.078% fail on Direction indicators (94% better than other 2012 cars)
      • 0.078% fail on Flashing type (94% better than other 2012 cars)
        • 0.053% fail on Side repeaters (90% better than other 2012 cars)
        • 0.021% fail on Individual direction indicators (97% better than other 2012 cars)
        • 0.0036% fail on All direction indicators
    • 0.036% fail on Reversing lamps (77% better than other 2012 cars)
      • 0.036% fail on Reversing lamps (77% better than other 2012 cars)
    • 0.0036% fail on Mandatory tell-tales
      • 0.0036% fail on Main beam tell-tale
  • 4.5% fail on Tyres (20% better than other 2012 cars)
    • 3.1% fail on Tread depth
    • 1.5% fail on Condition (45% better than other 2012 cars)
    • 0.036% fail on Size/type (65% better than other 2012 cars)
    • 0.0071% fail on Tyre pressure monitoring system
  • 2.0% fail on Steering (110% worse than other 2012 cars)
    • 2.0% fail on Steering linkage components (140% worse than other 2012 cars)
      • 1.8% fail on Track rod end (140% worse than other 2012 cars)
      • 0.15% fail on Ball joint (3 times worse than other 2012 cars)
      • 0.018% fail on Drag link end
    • 0.050% fail on Steering gear
      • 0.043% fail on Steering rack
      • 0.0071% fail on Operation
    • 0.0071% fail on Steering play
      • 0.0071% fail on Steering rack
  • 1.9% fail on Body, chassis, structure
    • 1.6% fail on Exhaust system (150% worse than other 2012 cars)
    • 0.085% fail on Transmission (88% better than other 2012 cars)
      • 0.078% fail on Drive shafts (88% better than other 2012 cars)
        • 0.078% fail on Joints (88% better than other 2012 cars)
      • 0.0071% fail on Prop shafts
        • 0.0071% fail on Joints
    • 0.082% fail on Doors
      • 0.057% fail on Driver's door
        • 0.057% fail on Door condition (110% worse than other 2012 cars)
      • 0.018% fail on Front passenger's door
        • 0.018% fail on Door condition
      • 0.0071% fail on Other passenger's door
        • 0.0071% fail on Door condition
    • 0.057% fail on Body
      • 0.036% fail on Other body component
      • 0.018% fail on Panel
      • 0.0036% fail on Mounting fixings
    • 0.039% fail on Bumpers
    • 0.032% fail on Fuel system (74% better than other 2012 cars)
      • 0.014% fail on Fuel cap/sealing device (83% better than other 2012 cars)
      • 0.011% fail on Tank
      • 0.0036% fail on Hose
      • 0.0036% fail on Pipe
    • 0.021% fail on Seats
      • 0.011% fail on Driver's seat
      • 0.011% fail on Passenger's seat
    • 0.011% fail on Engine mounting
      • 0.0071% fail on Engine mounting condition
      • 0.0036% fail on Bracket
    • 0.011% fail on Undertray
    • 0.0036% fail on Load security
      • 0.0036% fail on Tailgate
    • 0.0036% fail on Boot lid
      • 0.0036% fail on Other boot lid component
  • 1.7% fail on Noise, emissions and leaks (17% worse than other 2012 cars)
    • 1.6% fail on Exhaust emissions (20% worse than other 2012 cars)
      • 1.2% fail on Spark ignition (45% worse than other 2012 cars)
        • 0.72% fail on Catalyst emissions (160% worse than other 2012 cars)
        • 0.26% fail on Malfunction indicator lamp (48% better than other 2012 cars)
        • 0.23% fail on Emissions not tested (2 times worse than other 2012 cars)
        • 0.0071% fail on Non catalyst emissions
        • 0.0036% fail on Emission control equipment
          • 0.0036% fail on NOx sensor
      • 0.46% fail on Compression ignition
        • 0.27% fail on Malfunction indicator lamp
        • 0.13% fail on Emissions not tested (2 times worse than other 2012 cars)
        • 0.053% fail on On or after 01/07/2008 (73% better than other 2012 cars)
        • 0.032% fail on Pre 01/07/2008 Non turbo (3 times worse than other 2012 cars)
        • 0.014% fail on On or after 01/01/2014
        • 0.0036% fail on Pre 01/07/2008 Turbo
    • 0.082% fail on Fluid leaks
      • 0.057% fail on Engine oil leaks
      • 0.018% fail on Transmission oil leaks
      • 0.0071% fail on Other leaks
    • 0.0036% fail on Noise suppression
      • 0.0036% fail on Sound deadening material
  • 1.3% fail on Seat belts and supplementary restraint systems (160% worse than other 2012 cars)
    • 1.1% fail on Seat belts (3 times worse than other 2012 cars)
      • 1.1% fail on Condition (4 times worse than other 2012 cars)
      • 0.021% fail on Attachment (2 times worse than other 2012 cars)
      • 0.0071% fail on Requirements
      • 0.0036% fail on Pre-tensioners
    • 0.22% fail on SRS malfunction indicator lamp
    • 0.011% fail on Airbags
      • 0.011% fail on Drivers airbag
  • 0.38% fail on Road Wheels
    • 0.38% fail on Attachment (66% worse than other 2012 cars)
  • 0.35% fail on Identification of the vehicle
    • 0.35% fail on Registration plates
  • 0.021% fail on Seat belt installation check (2 times worse than other 2012 cars)
    • 0.018% fail on Belt(s)/padding (3 times worse than other 2012 cars)
    • 0.0036% fail on Anchorages
Read the Honest John Review

Search Good Garages