Nissan 200SX MOT Results
Registered in 199474.6% pass rate
from 63 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1994 cars and highlighted areas where the Nissan 200SX is unusually good or bad.
-
9.5% fail on
Visibility
- 6.3% fail on Washers
- 3.2% fail on Wipers
-
9.5% fail on
Lamps, reflectors and electrical equipment
-
4.8% fail on
Headlamp aim
- 4.8% fail on Headlamp aim
-
4.8% fail on
Front and rear fog lamps
-
4.8% fail on
Rear fog lamp
- 4.8% fail on Rear fog lamp
-
4.8% fail on
Rear fog lamp
-
1.6% fail on
Direction indicators
-
1.6% fail on
Flashing type
- 1.6% fail on Individual direction indicators
-
1.6% fail on
Flashing type
- 1.6% fail on Registration plate lamp(s)
-
4.8% fail on
Headlamp aim
-
9.5% fail on
Noise, emissions and leaks
-
9.5% fail on
Exhaust emissions
-
9.5% fail on
Spark ignition
- 6.3% fail on Catalyst emissions
- 3.2% fail on Non catalyst emissions (5 times worse than other 1994 cars)
-
9.5% fail on
Spark ignition
-
9.5% fail on
Exhaust emissions
-
7.9% fail on
Suspension
- 3.2% fail on Wheel bearings
- 3.2% fail on Component mounting prescribed areas
-
1.6% fail on
Suspension arms
- 1.6% fail on Ball joint
-
1.6% fail on
Anti-roll bars
- 1.6% fail on Linkage
-
3.2% fail on
Brakes
-
3.2% fail on
Brake performance
-
3.2% fail on
Service Brake Efficiency (sp)
-
3.2% fail on
Rbt (sp)
- 3.2% fail on Service brake imbalance
- 1.6% fail on Service brake performance
-
3.2% fail on
Rbt (sp)
-
1.6% fail on
Service brake performance
-
1.6% fail on
Rbt
- 1.6% fail on Service brake performance
- 1.6% fail on Service brake imbalance
-
1.6% fail on
Rbt
-
3.2% fail on
Service Brake Efficiency (sp)
- 1.6% fail on Rigid brake pipes
- 1.6% fail on Flexible brake hoses
-
1.6% fail on
Mechanical brake components
-
1.6% fail on
Brake linings and pads
- 1.6% fail on Brake pads
-
1.6% fail on
Brake discs and drums
- 1.6% fail on Brake discs
-
1.6% fail on
Brake linings and pads
-
3.2% fail on
Brake performance
-
3.2% fail on
Body, chassis, structure
-
1.6% fail on
Chassis
- 1.6% fail on Chassis condition
- 1.6% fail on Exhaust system
-
1.6% fail on
Chassis
-
1.6% fail on
Steering
-
1.6% fail on
Steering linkage components
- 1.6% fail on Track rod end
-
1.6% fail on
Steering linkage components
-
1.6% fail on
Seat belts and supplementary restraint systems
-
1.6% fail on
Seat belts
- 1.6% fail on Condition
-
1.6% fail on
Seat belts