Mitsubishi Shogun MOT Results

Registered in 1996
57.0% pass rate
from 761 tests in 2020
Pass rate by mileage
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1996 cars and highlighted areas where the Mitsubishi Shogun is unusually good or bad.

  • 19% fail on Body, chassis, structure (69% worse than other 1996 cars)
    • 6.6% fail on Exhaust system (78% worse than other 1996 cars)
    • 5.7% fail on Integral vehicle structure (2 times worse than other 1996 cars)
      • 5.5% fail on Integral vehicle structure condition (2 times worse than other 1996 cars)
      • 0.13% fail on Sub-frame
        • 0.13% fail on Sub-frame condition
    • 4.5% fail on Transmission
      • 3.5% fail on Drive shafts
        • 3.5% fail on Joints
      • 0.92% fail on Prop shafts
        • 0.66% fail on Joints
        • 0.26% fail on Prop shaft
    • 4.2% fail on Chassis (160% worse than other 1996 cars)
      • 4.2% fail on Chassis condition (160% worse than other 1996 cars)
    • 2.9% fail on Fuel system (2 times worse than other 1996 cars)
      • 1.8% fail on Pipe (6 times worse than other 1996 cars)
      • 0.53% fail on Fuel cap/sealing device
      • 0.26% fail on Tank
      • 0.13% fail on Hose
      • 0.13% fail on System
    • 1.2% fail on Body
      • 0.66% fail on Other body component
      • 0.26% fail on Mounting fixings
      • 0.26% fail on Panel
      • 0.13% fail on Body condition
    • 0.79% fail on Cabs (4 times worse than other 1996 cars)
      • 0.79% fail on Prescribed areas (4 times worse than other 1996 cars)
    • 0.39% fail on Towbar
      • 0.39% fail on Vehicle structure
    • 0.26% fail on Doors
      • 0.13% fail on Driver's door
        • 0.13% fail on Door condition
      • 0.13% fail on Other passenger's door
        • 0.13% fail on Door condition
    • 0.26% fail on Seats
      • 0.26% fail on Driver's seat
    • 0.13% fail on Engine mounting
      • 0.13% fail on Engine mounting condition
  • 17% fail on Lamps, reflectors and electrical equipment
    • 4.7% fail on Stop lamp
    • 3.7% fail on Front and rear fog lamps
      • 3.7% fail on Rear fog lamp
        • 3.5% fail on Rear fog lamp
        • 0.26% fail on Switch
    • 3.4% fail on Registration plate lamp(s) (98% worse than other 1996 cars)
    • 2.8% fail on Headlamps
      • 2.6% fail on Headlamp
      • 0.13% fail on Dipswitch
    • 2.8% fail on Headlamp aim
      • 2.8% fail on Headlamp aim
    • 2.0% fail on Position lamps
      • 2.0% fail on Position lamp
    • 2.0% fail on Electrical equipment
      • 0.92% fail on Battery(ies)
      • 0.92% fail on Horn
      • 0.13% fail on Trailer electrical socket
    • 1.1% fail on Direction indicators
      • 1.1% fail on Flashing type
        • 0.92% fail on Individual direction indicators
        • 0.13% fail on All direction indicators
    • 0.26% fail on Mandatory tell-tales
      • 0.13% fail on Main beam tell-tale
      • 0.13% fail on Rear fog lamp tell-tale
    • 0.13% fail on Hazard warning
      • 0.13% fail on Switch
  • 14% fail on Brakes
    • 7.5% fail on Rigid brake pipes (170% worse than other 1996 cars)
    • 6.4% fail on Brake performance
      • 3.4% fail on Service brake performance
        • 3.4% fail on Rbt
          • 2.8% fail on Service brake performance
          • 0.92% fail on Service brake imbalance
      • 2.1% fail on Service Brake Efficiency (sp)
        • 1.4% fail on Rbt (sp) (52% better than other 1996 cars)
          • 1.1% fail on Service brake performance
          • 0.53% fail on Service brake imbalance (70% better than other 1996 cars)
        • 0.53% fail on Decelerometer (sp) (4 times worse than other 1996 cars)
        • 0.13% fail on Plate brake tester (sp)
          • 0.13% fail on Service brake imbalance
      • 1.7% fail on Parking brake efficiency (sp)
        • 1.2% fail on Rbt (sp) (60% better than other 1996 cars)
        • 0.39% fail on Decelerometer (sp)
        • 0.13% fail on Gradient tester (sp)
      • 0.66% fail on Brake performance not tested
      • 0.26% fail on Parking brake performance (80% better than other 1996 cars)
        • 0.26% fail on Rbt (79% better than other 1996 cars)
          • 0.26% fail on Parking brake performance
    • 2.9% fail on Mechanical brake components
      • 2.4% fail on Brake linings and pads
        • 2.4% fail on Brake pads
      • 0.66% fail on Brake discs and drums
        • 0.53% fail on Brake discs
        • 0.13% fail on Brake drums
    • 1.3% fail on Other components and prescribed areas (3 times worse than other 1996 cars)
      • 1.2% fail on Prescribed areas (3 times worse than other 1996 cars)
        • 0.79% fail on Master cylinder/servo mounting (3 times worse than other 1996 cars)
        • 0.26% fail on Other braking system component
        • 0.13% fail on Park brake mechanism/associated mountings
      • 0.13% fail on Other components
    • 0.66% fail on ABS / EBS / ESC
      • 0.66% fail on Anti-lock braking system
    • 0.39% fail on Hydraulic systems
      • 0.13% fail on Reservoirs
      • 0.13% fail on Brake fluid
      • 0.13% fail on Valves
    • 0.26% fail on Service brake pedal or hand lever
      • 0.26% fail on Pedal
    • 0.26% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.13% fail on Hydraulic brake callipers
      • 0.13% fail on Hydraulic brake cylinder
    • 0.13% fail on Flexible brake hoses
  • 14% fail on Suspension
    • 6.3% fail on Component mounting prescribed areas
    • 4.2% fail on Anti-roll bars (65% worse than other 1996 cars)
      • 1.8% fail on Linkage pins and bushes (2 times worse than other 1996 cars)
      • 1.4% fail on Pins and bushes (2 times worse than other 1996 cars)
      • 1.3% fail on Linkage (4 times worse than other 1996 cars)
      • 0.13% fail on Attachment bracket and mounting
      • 0.13% fail on Ball joint
      • 0.13% fail on Linkage ball joints
      • 0.13% fail on Linkage ball joint dust cover
    • 3.2% fail on Suspension arms
      • 1.8% fail on Ball joint
      • 0.66% fail on Pins and bushes
      • 0.66% fail on Ball joint dust cover
    • 2.1% fail on Shock absorbers
    • 1.6% fail on Wheel bearings
    • 0.66% fail on Springs
      • 0.53% fail on Coil springs
        • 0.53% fail on Coil spring
      • 0.13% fail on Spring mounting prescribed areas
    • 0.39% fail on Other suspension component
      • 0.26% fail on Ball joint
      • 0.13% fail on Other suspension component
    • 0.26% fail on Sub-frames
      • 0.26% fail on Sub-frame mounting prescribed areas
    • 0.13% fail on Suspension rods
      • 0.13% fail on Suspension rod
  • 7.2% fail on Noise, emissions and leaks
    • 5.8% fail on Exhaust emissions
      • 3.3% fail on Spark ignition (51% better than other 1996 cars)
        • 2.6% fail on Catalyst emissions (51% better than other 1996 cars)
        • 0.79% fail on Emissions not tested
      • 2.5% fail on Compression ignition (170% worse than other 1996 cars)
        • 1.4% fail on Pre 01/07/2008 Turbo (2 times worse than other 1996 cars)
        • 0.79% fail on Emissions not tested
        • 0.39% fail on Pre 01/07/2008 Non turbo
    • 1.6% fail on Fluid leaks
      • 1.3% fail on Engine oil leaks
      • 0.26% fail on Other leaks
  • 6.2% fail on Visibility
    • 3.8% fail on Wipers
    • 2.0% fail on Washers
    • 0.13% fail on Driver's view
    • 0.13% fail on Bonnet
    • 0.13% fail on View to rear
      • 0.13% fail on Mirrors
  • 5.7% fail on Seat belts and supplementary restraint systems
    • 5.7% fail on Seat belts (57% worse than other 1996 cars)
      • 5.4% fail on Prescribed areas (80% worse than other 1996 cars)
      • 0.13% fail on Attachment
      • 0.13% fail on Requirements
      • 0.13% fail on Condition
  • 4.5% fail on Steering
    • 3.8% fail on Steering linkage components
      • 2.4% fail on Track rod end
      • 0.92% fail on Drag link end
      • 0.66% fail on Ball joint
      • 0.13% fail on Intermediate drop arm
      • 0.13% fail on Locking devices
    • 0.26% fail on Steering column
    • 0.26% fail on Steering play
      • 0.26% fail on Steering box
    • 0.13% fail on Steering gear
      • 0.13% fail on Steering box
    • 0.13% fail on Prescribed areas
    • 0.13% fail on Power steering
      • 0.13% fail on Operation
  • 1.6% fail on Tyres (61% better than other 1996 cars)
    • 1.2% fail on Tread depth
    • 0.39% fail on Condition (78% better than other 1996 cars)
  • 0.92% fail on Identification of the vehicle
    • 0.92% fail on Registration plates
  • 0.39% fail on Road Wheels
    • 0.39% fail on Attachment
  • 0.13% fail on Seat belt installation check
    • 0.13% fail on Belt(s)/padding

Search Good Garages