Mitsubishi Shogun MOT Results
Registered in 199367.2% pass rate
from 64 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1993 cars and highlighted areas where the Mitsubishi Shogun is unusually good or bad.
-
19% fail on
Body, chassis, structure
-
9.4% fail on
Transmission
(2 times worse than other 1993 cars)
-
6.3% fail on
Drive shafts
- 6.3% fail on Joints
-
3.1% fail on
Prop shafts
(7 times worse than other 1993 cars)
- 3.1% fail on Joints (11 times worse than other 1993 cars)
-
6.3% fail on
Drive shafts
-
7.8% fail on
Integral vehicle structure
(2 times worse than other 1993 cars)
- 7.8% fail on Integral vehicle structure condition (2 times worse than other 1993 cars)
-
1.6% fail on
Chassis
- 1.6% fail on Chassis condition
- 1.6% fail on Exhaust system
-
1.6% fail on
Fuel system
- 1.6% fail on Pipe
-
1.6% fail on
Load security
-
1.6% fail on
Tailgate
- 1.6% fail on Tailgate condition
-
1.6% fail on
Tailgate
-
1.6% fail on
Cabs
- 1.6% fail on Steps
-
9.4% fail on
Transmission
(2 times worse than other 1993 cars)
-
14% fail on
Lamps, reflectors and electrical equipment
-
6.3% fail on
Headlamp aim
- 4.7% fail on Headlamp aim
- 1.6% fail on Headlamp aim not tested
- 6.3% fail on Stop lamp
-
6.3% fail on
Front and rear fog lamps
-
6.3% fail on
Rear fog lamp
- 6.3% fail on Rear fog lamp
-
6.3% fail on
Rear fog lamp
-
1.6% fail on
Headlamps
- 1.6% fail on Headlamp
-
1.6% fail on
Electrical equipment
- 1.6% fail on Battery(ies)
-
6.3% fail on
Headlamp aim
-
13% fail on
Brakes
-
7.8% fail on
Brake performance
-
3.1% fail on
Service brake performance
-
3.1% fail on
Rbt
- 3.1% fail on Service brake performance
-
3.1% fail on
Rbt
-
3.1% fail on
Parking brake efficiency (sp)
- 3.1% fail on Rbt (sp)
- 1.6% fail on Brake performance not tested
-
3.1% fail on
Service brake performance
- 3.1% fail on Rigid brake pipes
- 1.6% fail on Load sensing valves
-
1.6% fail on
Other components and prescribed areas
-
1.6% fail on
Prescribed areas
- 1.6% fail on Other braking system component
-
1.6% fail on
Prescribed areas
-
1.6% fail on
Mechanical brake components
-
1.6% fail on
Brake discs and drums
- 1.6% fail on Brake discs
-
1.6% fail on
Brake discs and drums
-
7.8% fail on
Brake performance
-
13% fail on
Suspension
- 7.8% fail on Component mounting prescribed areas
-
4.7% fail on
Anti-roll bars
- 4.7% fail on Linkage pins and bushes (18 times worse than other 1993 cars)
- 1.6% fail on Attachment bracket and mounting
- 1.6% fail on Wheel bearings
-
1.6% fail on
Suspension arms
- 1.6% fail on Ball joint dust cover
-
9.4% fail on
Visibility
- 6.3% fail on Washers
- 3.1% fail on Wipers
-
6.3% fail on
Steering
-
6.3% fail on
Steering linkage components
- 3.1% fail on Ball joint (5 times worse than other 1993 cars)
- 3.1% fail on Drag link end (7 times worse than other 1993 cars)
- 1.6% fail on Track rod end
- 1.6% fail on Intermediate drop arm
-
6.3% fail on
Steering linkage components
-
6.3% fail on
Seat belts and supplementary restraint systems
-
6.3% fail on
Seat belts
- 6.3% fail on Prescribed areas
-
6.3% fail on
Seat belts
-
4.7% fail on
Noise, emissions and leaks
-
4.7% fail on
Exhaust emissions
-
3.1% fail on
Spark ignition
- 1.6% fail on Catalyst emissions
- 1.6% fail on Emissions not tested
-
1.6% fail on
Compression ignition
- 1.6% fail on Emissions not tested
-
3.1% fail on
Spark ignition
-
1.6% fail on
Fluid leaks
- 1.6% fail on Engine oil leaks
-
4.7% fail on
Exhaust emissions
-
1.6% fail on
Seat belt installation check
- 1.6% fail on Anchorages