MOT Results

Honest John Good Garage Guide MOT Results » Mitsubishi » Pajero » 2001

Mitsubishi Pajero MOT Results

Registered in 2001
63.1% pass rate
from 141 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2001 cars and highlighted areas where the Mitsubishi Pajero is unusually good or bad.

  • 17% fail on Body, chassis, structure (74% worse than other 2001 cars)
    • 6.4% fail on Integral vehicle structure (3 times worse than other 2001 cars)
      • 6.4% fail on Integral vehicle structure condition (3 times worse than other 2001 cars)
    • 5.7% fail on Exhaust system
    • 2.8% fail on Chassis
      • 2.8% fail on Chassis condition
    • 2.8% fail on Transmission
      • 2.1% fail on Drive shafts
        • 2.1% fail on Joints
      • 0.71% fail on Prop shafts
        • 0.71% fail on Joints
    • 1.4% fail on Fuel system
      • 0.71% fail on Tank
      • 0.71% fail on Pipe
    • 0.71% fail on Towbar
      • 0.71% fail on Other towbar components
    • 0.71% fail on Seats
      • 0.71% fail on Passenger's seat
    • 0.71% fail on Cabs
      • 0.71% fail on Prescribed areas
  • 13% fail on Lamps, reflectors and electrical equipment
    • 5.7% fail on Front and rear fog lamps (3 times worse than other 2001 cars)
      • 5.7% fail on Rear fog lamp (3 times worse than other 2001 cars)
        • 5.7% fail on Rear fog lamp (3 times worse than other 2001 cars)
    • 2.8% fail on Headlamp aim
      • 2.8% fail on Headlamp aim
    • 2.1% fail on Registration plate lamp(s)
    • 2.1% fail on Electrical equipment
      • 2.1% fail on Horn (5 times worse than other 2001 cars)
    • 1.4% fail on Headlamps
      • 1.4% fail on Headlamp
    • 1.4% fail on Stop lamp
    • 0.71% fail on Position lamps
      • 0.71% fail on Position lamp
  • 12% fail on Suspension
    • 4.3% fail on Anti-roll bars
      • 1.4% fail on Pins and bushes
      • 1.4% fail on Linkage ball joints
      • 0.71% fail on Linkage pins and bushes
      • 0.71% fail on Ball joint
    • 2.8% fail on Suspension arms
      • 1.4% fail on Pins and bushes
      • 1.4% fail on Ball joint
      • 1.4% fail on Ball joint dust cover
    • 2.8% fail on Component mounting prescribed areas
    • 1.4% fail on Wheel bearings
    • 1.4% fail on Shock absorbers
    • 0.71% fail on Axles
      • 0.71% fail on Swivel pins and bushes
    • 0.71% fail on Springs
      • 0.71% fail on Coil springs
        • 0.71% fail on Coil spring
    • 0.71% fail on Suspension rods
      • 0.71% fail on Ball joint
  • 11% fail on Brakes
    • 6.4% fail on Brake performance
      • 3.5% fail on Service brake performance
        • 2.8% fail on Rbt
          • 2.8% fail on Service brake performance
        • 0.71% fail on Decelerometer
          • 0.71% fail on Service brake performance
      • 2.8% fail on Parking brake efficiency (sp)
        • 2.1% fail on Rbt (sp)
        • 0.71% fail on Decelerometer (sp)
      • 1.4% fail on Service Brake Efficiency (sp)
        • 1.4% fail on Rbt (sp)
          • 1.4% fail on Service brake performance
      • 0.71% fail on Parking brake performance
        • 0.71% fail on Rbt
          • 0.71% fail on Parking brake performance
    • 4.3% fail on Mechanical brake components
      • 3.5% fail on Brake linings and pads
        • 3.5% fail on Brake pads
      • 0.71% fail on Brake discs and drums
        • 0.71% fail on Brake discs
    • 2.1% fail on Rigid brake pipes
    • 1.4% fail on Service brake pedal or hand lever
      • 0.71% fail on Pedal
      • 0.71% fail on Hand lever
  • 5.0% fail on Visibility
    • 3.5% fail on Wipers
    • 2.1% fail on Washers
  • 4.3% fail on Steering
    • 3.5% fail on Steering linkage components
      • 3.5% fail on Track rod end
      • 0.71% fail on Ball joint
    • 0.71% fail on Steering gear
      • 0.71% fail on Steering rack
    • 0.71% fail on Power steering
      • 0.71% fail on Operation
      • 0.71% fail on Other components
  • 3.5% fail on Noise, emissions and leaks
    • 2.1% fail on Exhaust emissions
      • 2.1% fail on Compression ignition
        • 1.4% fail on Pre 01/07/2008 Turbo
        • 1.4% fail on Emissions not tested (8 times worse than other 2001 cars)
        • 0.71% fail on Malfunction indicator lamp
    • 1.4% fail on Fluid leaks
      • 1.4% fail on Engine oil leaks
  • 2.8% fail on Seat belts and supplementary restraint systems
    • 2.8% fail on Seat belts
      • 2.8% fail on Prescribed areas
  • 0.71% fail on Identification of the vehicle
    • 0.71% fail on Registration plates

Search Good Garages