Mitsubishi Outlander MOT Results

Registered in 2006

52.6% pass rate

from 152 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2006 cars and highlighted areas where the Mitsubishi Outlander is unusually good or bad.

16% fail on Suspension
- 11% fail on Anti-roll bars (110% worse than other 2006 cars)
  - 3.3% fail on Pins and bushes (15 times worse than other 2006 cars)
  - 2.6% fail on Linkage (8 times worse than other 2006 cars)
  - 2.6% fail on Linkage pins and bushes (11 times worse than other 2006 cars)
  - 2.0% fail on Linkage ball joints
  - 0.66% fail on Ball joint dust cover
- 5.3% fail on Suspension arms
  - 3.3% fail on Pins and bushes
  - 2.6% fail on Ball joint
  - 0.66% fail on Suspension arm
- 1.3% fail on Sub-frames
  - 1.3% fail on Sub-frame (5 times worse than other 2006 cars)
- 1.3% fail on Component mounting prescribed areas
- 0.66% fail on Springs
  - 0.66% fail on Coil springs
    - 0.66% fail on Coil spring
- 0.66% fail on Other suspension component
  - 0.66% fail on Ball joint
14% fail on Brakes
- 9.9% fail on Brake performance
  - 7.9% fail on Parking brake efficiency (sp)
    - 3.9% fail on Rbt (sp)
    - 3.9% fail on Decelerometer (sp) (19 times worse than other 2006 cars)
  - 2.0% fail on Service brake performance
    - 1.3% fail on Rbt
      - 1.3% fail on Service brake performance
    - 0.66% fail on Decelerometer
      - 0.66% fail on Service brake performance
  - 0.66% fail on Brake performance not tested
  - 0.66% fail on Service Brake Efficiency (sp)
    - 0.66% fail on Rbt (sp)
      - 0.66% fail on Service brake imbalance
  - 0.66% fail on Parking brake performance
    - 0.66% fail on Rbt
      - 0.66% fail on Parking brake performance
- 4.6% fail on Mechanical brake components
  - 3.9% fail on Brake discs and drums (2 times worse than other 2006 cars)
    - 3.9% fail on Brake discs (2 times worse than other 2006 cars)
  - 3.3% fail on Brake linings and pads
    - 3.3% fail on Brake pads
- 0.66% fail on Service brake pedal or hand lever
  - 0.66% fail on Pedal
- 0.66% fail on Parking brake control
  - 0.66% fail on Lever
- 0.66% fail on Rigid brake pipes
14% fail on Lamps, reflectors and electrical equipment
- 6.6% fail on Headlamps
  - 6.6% fail on Headlamp
- 6.6% fail on Stop lamp
- 2.0% fail on Registration plate lamp(s)
- 0.66% fail on Headlamp aim
  - 0.66% fail on Headlamp aim not tested
- 0.66% fail on Direction indicators
  - 0.66% fail on Flashing type
    - 0.66% fail on Side repeaters
- 0.66% fail on Electrical equipment
  - 0.66% fail on Battery(ies)
12% fail on Steering (2 times worse than other 2006 cars)
- 11% fail on Steering linkage components (3 times worse than other 2006 cars)
  - 11% fail on Track rod end (3 times worse than other 2006 cars)
- 1.3% fail on Power steering
  - 1.3% fail on Pipes and hoses (22 times worse than other 2006 cars)
- 0.66% fail on Steering play
  - 0.66% fail on Steering rack
9.9% fail on Noise, emissions and leaks
- 9.2% fail on Exhaust emissions
  - 8.6% fail on Spark ignition
    - 6.6% fail on Malfunction indicator lamp (180% worse than other 2006 cars)
    - 3.3% fail on Catalyst emissions
  - 0.66% fail on Compression ignition
    - 0.66% fail on Malfunction indicator lamp
- 0.66% fail on Fluid leaks
  - 0.66% fail on Engine oil leaks
5.9% fail on Body, chassis, structure
- 3.9% fail on Exhaust system
- 1.3% fail on Transmission
  - 1.3% fail on Drive shafts
    - 1.3% fail on Joints
- 0.66% fail on Chassis
  - 0.66% fail on Chassis condition
5.3% fail on Visibility
- 3.9% fail on Wipers
- 1.3% fail on Washers
3.3% fail on Tyres
- 2.0% fail on Tread depth
- 1.3% fail on Condition
1.3% fail on Seat belts and supplementary restraint systems
- 1.3% fail on Seat belts
  - 0.66% fail on Prescribed areas
  - 0.66% fail on Condition
0.66% fail on Identification of the vehicle
- 0.66% fail on Registration plates