Mitsubishi i MOT Results
Registered in 200769.8% pass rate
from 179 tests in 2021
(36% better than other 2007 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2007 cars and highlighted areas where the Mitsubishi i is unusually good or bad.
-
11% fail on
Lamps, reflectors and electrical equipment
- 5.0% fail on Stop lamp
-
2.2% fail on
Front and rear fog lamps
-
2.2% fail on
Rear fog lamp
- 2.2% fail on Rear fog lamp
-
2.2% fail on
Rear fog lamp
-
1.1% fail on
Headlamp aim
- 1.1% fail on Headlamp aim
-
0.56% fail on
Headlamps
- 0.56% fail on Headlamp
-
0.56% fail on
Hazard warning
- 0.56% fail on Switch
-
0.56% fail on
Reversing lamps
- 0.56% fail on Reversing lamps
- 0.56% fail on Registration plate lamp(s)
-
6.7% fail on
Visibility
- 3.9% fail on Washers
- 3.4% fail on Wipers
- 0.56% fail on Bonnet
-
0.56% fail on
View to rear
- 0.56% fail on Mirrors
-
6.1% fail on
Suspension
(62% better than other 2007 cars)
-
3.4% fail on
Springs
-
3.4% fail on
Coil springs
- 3.4% fail on Coil spring
-
3.4% fail on
Coil springs
-
2.2% fail on
Anti-roll bars
- 1.1% fail on Linkage ball joints
- 1.1% fail on Linkage ball joint dust cover
- 1.1% fail on Component mounting prescribed areas
- 0.56% fail on Shock absorbers
-
3.4% fail on
Springs
-
5.6% fail on
Body, chassis, structure
- 2.2% fail on Bumpers (12 times worse than other 2007 cars)
-
1.1% fail on
Integral vehicle structure
- 1.1% fail on Integral vehicle structure condition
-
1.1% fail on
Body
(5 times worse than other 2007 cars)
- 0.56% fail on Panel
- 0.56% fail on Other body component
- 0.56% fail on Exhaust system
-
0.56% fail on
Transmission
-
0.56% fail on
Drive shafts
- 0.56% fail on Joints
-
0.56% fail on
Drive shafts
-
3.9% fail on
Brakes
(64% better than other 2007 cars)
-
2.2% fail on
Brake performance
-
2.2% fail on
Service brake performance
-
2.2% fail on
Rbt
- 1.7% fail on Service brake performance
- 0.56% fail on Service brake imbalance
-
2.2% fail on
Rbt
-
2.2% fail on
Service brake performance
-
1.1% fail on
Mechanical brake components
-
0.56% fail on
Brake linings and pads
- 0.56% fail on Brake pads
-
0.56% fail on
Brake discs and drums
- 0.56% fail on Brake discs
-
0.56% fail on
Brake linings and pads
- 0.56% fail on Rigid brake pipes
-
0.56% fail on
ABS / EBS / ESC
- 0.56% fail on Anti-lock braking system
-
2.2% fail on
Brake performance
-
2.8% fail on
Tyres
- 2.8% fail on Condition
-
2.2% fail on
Seat belts and supplementary restraint systems
-
1.7% fail on
Seat belts
- 1.1% fail on Prescribed areas
- 0.56% fail on Requirements
- 1.1% fail on SRS malfunction indicator lamp
-
1.7% fail on
Seat belts
-
1.7% fail on
Noise, emissions and leaks
-
1.7% fail on
Exhaust emissions
-
1.1% fail on
Spark ignition
- 0.56% fail on Catalyst emissions
- 0.56% fail on Malfunction indicator lamp
-
0.56% fail on
Compression ignition
- 0.56% fail on Emissions not tested
-
1.1% fail on
Spark ignition
-
1.7% fail on
Exhaust emissions
-
1.1% fail on
Steering
-
1.1% fail on
Steering linkage components
- 1.1% fail on Track rod end
-
1.1% fail on
Steering linkage components
-
0.56% fail on
Identification of the vehicle
- 0.56% fail on Registration plates