Mitsubishi FTO MOT Results
Registered in 199856.0% pass rate
from 25 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1998 cars and highlighted areas where the Mitsubishi FTO is unusually good or bad.
-
28% fail on
Suspension
-
12% fail on
Suspension arms
- 4.0% fail on Pins and bushes
- 4.0% fail on Ball joint
- 4.0% fail on Ball joint dust cover
-
12% fail on
Anti-roll bars
(3 times worse than other 1998 cars)
- 4.0% fail on Pins and bushes
- 4.0% fail on Linkage
- 4.0% fail on Ball joint
- 8.0% fail on Component mounting prescribed areas
-
12% fail on
Suspension arms
-
20% fail on
Brakes
-
20% fail on
Brake performance
-
12% fail on
Service brake performance
(3 times worse than other 1998 cars)
-
12% fail on
Rbt
(3 times worse than other 1998 cars)
- 8.0% fail on Service brake performance
- 4.0% fail on Service brake imbalance
-
12% fail on
Rbt
(3 times worse than other 1998 cars)
-
12% fail on
Service Brake Efficiency (sp)
(3 times worse than other 1998 cars)
-
12% fail on
Rbt (sp)
(3 times worse than other 1998 cars)
- 8.0% fail on Service brake imbalance
- 4.0% fail on Service brake performance
-
12% fail on
Rbt (sp)
(3 times worse than other 1998 cars)
-
4.0% fail on
Parking brake efficiency (sp)
- 4.0% fail on Rbt (sp)
-
12% fail on
Service brake performance
(3 times worse than other 1998 cars)
- 4.0% fail on Rigid brake pipes
-
4.0% fail on
Mechanical brake components
-
4.0% fail on
Brake linings and pads
- 4.0% fail on Brake pads
-
4.0% fail on
Brake linings and pads
-
20% fail on
Brake performance
-
16% fail on
Noise, emissions and leaks
-
16% fail on
Exhaust emissions
-
16% fail on
Spark ignition
- 16% fail on Catalyst emissions
-
16% fail on
Spark ignition
-
16% fail on
Exhaust emissions
-
12% fail on
Lamps, reflectors and electrical equipment
-
12% fail on
Headlamps
- 12% fail on Headlamp (3 times worse than other 1998 cars)
-
12% fail on
Headlamps
-
12% fail on
Body, chassis, structure
-
8.0% fail on
Integral vehicle structure
- 8.0% fail on Integral vehicle structure condition
-
4.0% fail on
Chassis
- 4.0% fail on Chassis condition
-
8.0% fail on
Integral vehicle structure
-
8.0% fail on
Tyres
- 8.0% fail on Condition
-
4.0% fail on
Identification of the vehicle
- 4.0% fail on Registration plates
-
4.0% fail on
Visibility
- 4.0% fail on Washers
-
4.0% fail on
Seat belts and supplementary restraint systems
-
4.0% fail on
Seat belts
- 4.0% fail on Prescribed areas
-
4.0% fail on
Seat belts