Mitsubishi Delica / L300 / L400 MOT Results

Registered in 1996
54.2% pass rate
from 48 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1996 cars and highlighted areas where the Mitsubishi Delica / L300 / L400 is unusually good or bad.

  • 29% fail on Suspension (140% worse than other 1996 cars)
    • 15% fail on Component mounting prescribed areas (2 times worse than other 1996 cars)
    • 6.3% fail on Suspension arms
      • 2.1% fail on Pins and bushes
      • 2.1% fail on Ball joint
      • 2.1% fail on Ball joint dust cover
    • 4.2% fail on Springs
      • 2.1% fail on Coil springs
        • 2.1% fail on Coil spring
      • 2.1% fail on Spring mounting prescribed areas
    • 2.1% fail on Shock absorbers
    • 2.1% fail on Anti-roll bars
      • 2.1% fail on Pins and bushes
    • 2.1% fail on Sub-frames
      • 2.1% fail on Sub-frame mounting prescribed areas
  • 15% fail on Brakes
    • 13% fail on Brake performance
      • 6.3% fail on Service brake performance
        • 6.3% fail on Rbt
          • 6.3% fail on Service brake performance
          • 2.1% fail on Service brake imbalance
      • 6.3% fail on Service Brake Efficiency (sp)
        • 6.3% fail on Rbt (sp)
          • 6.3% fail on Service brake performance
          • 2.1% fail on Service brake imbalance
      • 4.2% fail on Brake performance not tested (9 times worse than other 1996 cars)
      • 4.2% fail on Parking brake efficiency (sp)
        • 4.2% fail on Rbt (sp)
      • 2.1% fail on Parking brake performance
        • 2.1% fail on Rbt
          • 2.1% fail on Parking brake performance
    • 4.2% fail on Rigid brake pipes
    • 2.1% fail on Mechanical brake components
      • 2.1% fail on Brake linings and pads
        • 2.1% fail on Brake pads
  • 10% fail on Visibility
    • 6.3% fail on Wipers
    • 4.2% fail on Washers
  • 10% fail on Body, chassis, structure
    • 4.2% fail on Transmission
      • 4.2% fail on Drive shafts
        • 4.2% fail on Joints
    • 2.1% fail on Integral vehicle structure
      • 2.1% fail on Integral vehicle structure condition
    • 2.1% fail on Chassis
      • 2.1% fail on Chassis condition
    • 2.1% fail on Exhaust system
    • 2.1% fail on Fuel system
      • 2.1% fail on Hose
      • 2.1% fail on Fuel cap/sealing device
    • 2.1% fail on Seats
      • 2.1% fail on Driver's seat
  • 8.3% fail on Steering
    • 4.2% fail on Steering gear
      • 4.2% fail on Steering rack
    • 2.1% fail on Steering linkage components
      • 2.1% fail on Track rod end
    • 2.1% fail on Steering wheel
  • 6.3% fail on Lamps, reflectors and electrical equipment
    • 4.2% fail on Front and rear fog lamps
      • 4.2% fail on Rear fog lamp
        • 4.2% fail on Rear fog lamp
    • 4.2% fail on Registration plate lamp(s)
    • 2.1% fail on Headlamps
      • 2.1% fail on Headlamp
    • 2.1% fail on Headlamp aim
      • 2.1% fail on Headlamp aim
    • 2.1% fail on Rear reflectors
  • 4.2% fail on Identification of the vehicle
    • 4.2% fail on Registration plates
  • 4.2% fail on Noise, emissions and leaks
    • 4.2% fail on Exhaust emissions
      • 2.1% fail on Spark ignition
        • 2.1% fail on Emissions not tested
      • 2.1% fail on Compression ignition
        • 2.1% fail on Emissions not tested
    • 2.1% fail on Fluid leaks
      • 2.1% fail on Other leaks
  • 2.1% fail on Tyres
    • 2.1% fail on Tread depth

Search Good Garages