MINI 1000 MOT Results
Registered in 201672.0% pass rate
from 50 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2016 cars and highlighted areas where the MINI 1000 is unusually good or bad.
-
14% fail on
Noise, emissions and leaks
(15 times worse than other 2016 cars)
-
14% fail on
Exhaust emissions
(16 times worse than other 2016 cars)
-
14% fail on
Spark ignition
(28 times worse than other 2016 cars)
- 10% fail on Catalyst emissions (57 times worse than other 2016 cars)
- 2.0% fail on Non catalyst emissions
- 2.0% fail on Emissions not tested
-
14% fail on
Spark ignition
(28 times worse than other 2016 cars)
-
14% fail on
Exhaust emissions
(16 times worse than other 2016 cars)
-
8.0% fail on
Lamps, reflectors and electrical equipment
-
4.0% fail on
Headlamp aim
- 4.0% fail on Headlamp aim
-
4.0% fail on
Front and rear fog lamps
(20 times worse than other 2016 cars)
-
4.0% fail on
Rear fog lamp
(20 times worse than other 2016 cars)
- 4.0% fail on Rear fog lamp (20 times worse than other 2016 cars)
-
4.0% fail on
Rear fog lamp
(20 times worse than other 2016 cars)
-
2.0% fail on
Direction indicators
-
2.0% fail on
Flashing type
- 2.0% fail on Individual direction indicators
-
2.0% fail on
Flashing type
-
2.0% fail on
Hazard warning
- 2.0% fail on Switch
-
4.0% fail on
Headlamp aim
-
8.0% fail on
Body, chassis, structure
(13 times worse than other 2016 cars)
-
6.0% fail on
Transmission
(26 times worse than other 2016 cars)
-
4.0% fail on
Drive shafts
(18 times worse than other 2016 cars)
- 4.0% fail on Joints (19 times worse than other 2016 cars)
-
2.0% fail on
Prop shafts
- 2.0% fail on Joints
-
4.0% fail on
Drive shafts
(18 times worse than other 2016 cars)
- 2.0% fail on Floor
-
6.0% fail on
Transmission
(26 times worse than other 2016 cars)
-
6.0% fail on
Visibility
- 6.0% fail on Washers (4 times worse than other 2016 cars)
-
4.0% fail on
Brakes
-
2.0% fail on
Other components and prescribed areas
- 2.0% fail on Other components
-
2.0% fail on
Brake performance
-
2.0% fail on
Service Brake Efficiency (sp)
-
2.0% fail on
Rbt (sp)
- 2.0% fail on Service brake performance
-
2.0% fail on
Rbt (sp)
-
2.0% fail on
Service Brake Efficiency (sp)
-
2.0% fail on
Other components and prescribed areas
-
4.0% fail on
Suspension
- 2.0% fail on Wheel bearings
-
2.0% fail on
Suspension arms
- 2.0% fail on Pins and bushes
-
2.0% fail on
Sub-frames
- 2.0% fail on Sub-frame mounting prescribed areas
-
2.0% fail on
Steering
-
2.0% fail on
Steering gear
- 2.0% fail on Steering rack
-
2.0% fail on
Steering gear