MINI 1000 MOT Results
Registered in 198174.0% pass rate
from 73 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1981 cars and highlighted areas where the MINI 1000 is unusually good or bad.
-
15% fail on
Lamps, reflectors and electrical equipment
-
6.8% fail on
Headlamp aim
- 6.8% fail on Headlamp aim
-
5.5% fail on
Front and rear fog lamps
-
5.5% fail on
Rear fog lamp
- 5.5% fail on Rear fog lamp
-
5.5% fail on
Rear fog lamp
-
4.1% fail on
Direction indicators
-
4.1% fail on
Flashing type
- 4.1% fail on All direction indicators (4 times worse than other 1981 cars)
-
4.1% fail on
Flashing type
- 1.4% fail on Stop lamp
-
1.4% fail on
Electrical equipment
- 1.4% fail on Horn
-
6.8% fail on
Headlamp aim
-
12% fail on
Visibility
- 6.8% fail on Washers
- 4.1% fail on Wipers
- 1.4% fail on Bonnet
-
11% fail on
Noise, emissions and leaks
-
11% fail on
Exhaust emissions
-
11% fail on
Spark ignition
- 11% fail on Non catalyst emissions
-
11% fail on
Spark ignition
-
11% fail on
Exhaust emissions
-
6.8% fail on
Steering
-
4.1% fail on
Steering gear
- 2.7% fail on Steering rack
- 1.4% fail on Operation
-
2.7% fail on
Steering linkage components
- 2.7% fail on Track rod end
- 1.4% fail on Intermediate drop arm
-
4.1% fail on
Steering gear
-
5.5% fail on
Body, chassis, structure
-
2.7% fail on
Integral vehicle structure
- 2.7% fail on Integral vehicle structure condition
-
2.7% fail on
Transmission
-
1.4% fail on
Drive shafts
- 1.4% fail on Joints
-
1.4% fail on
Prop shafts
- 1.4% fail on Joints
-
1.4% fail on
Drive shafts
-
2.7% fail on
Integral vehicle structure
-
2.7% fail on
Brakes
-
2.7% fail on
Brake performance
-
1.4% fail on
Service brake performance
-
1.4% fail on
Rbt
- 1.4% fail on Service brake performance
-
1.4% fail on
Rbt
-
1.4% fail on
Service Brake Efficiency (sp)
-
1.4% fail on
Rbt (sp)
- 1.4% fail on Service brake performance
-
1.4% fail on
Rbt (sp)
-
1.4% fail on
Service brake performance
-
2.7% fail on
Brake performance
-
2.7% fail on
Suspension
- 1.4% fail on Wheel bearings
-
1.4% fail on
Suspension arms
- 1.4% fail on Ball joint
-
1.4% fail on
Identification of the vehicle
- 1.4% fail on Registration plates