Microcar M.GO MOT Results
Registered in 201268.7% pass rate
from 67 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Microcar M.GO is unusually good or bad.
-
19% fail on
Brakes
(2 times worse than other 2012 cars)
-
12% fail on
Brake performance
(3 times worse than other 2012 cars)
-
7.5% fail on
Service brake performance
(4 times worse than other 2012 cars)
-
7.5% fail on
Rbt
(4 times worse than other 2012 cars)
- 4.5% fail on Service brake performance
- 3.0% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles) (3450 times worse than other 2012 cars)
-
7.5% fail on
Rbt
(4 times worse than other 2012 cars)
-
7.5% fail on
Service Brake Efficiency (sp)
(16 times worse than other 2012 cars)
-
7.5% fail on
Rbt (sp)
(17 times worse than other 2012 cars)
- 4.5% fail on Service brake imbalance (14 times worse than other 2012 cars)
- 3.0% fail on Service brake performance (16 times worse than other 2012 cars)
-
7.5% fail on
Rbt (sp)
(17 times worse than other 2012 cars)
-
3.0% fail on
Parking brake efficiency (sp)
- 3.0% fail on Rbt (sp)
- 1.5% fail on Brake performance not tested
-
1.5% fail on
Parking brake performance
-
1.5% fail on
Rbt
- 1.5% fail on Parking brake performance
-
1.5% fail on
Rbt
-
7.5% fail on
Service brake performance
(4 times worse than other 2012 cars)
- 4.5% fail on Rigid brake pipes (9 times worse than other 2012 cars)
-
3.0% fail on
Mechanical brake components
-
3.0% fail on
Brake discs and drums
- 3.0% fail on Brake discs
-
1.5% fail on
Brake linings and pads
- 1.5% fail on Brake pads
-
3.0% fail on
Brake discs and drums
-
1.5% fail on
Service brake pedal or hand lever
- 1.5% fail on Pedal
- 1.5% fail on Flexible brake hoses
-
12% fail on
Brake performance
(3 times worse than other 2012 cars)
-
9.0% fail on
Suspension
-
4.5% fail on
Suspension arms
- 3.0% fail on Ball joint
- 1.5% fail on Suspension arm
- 1.5% fail on Ball joint dust cover
-
3.0% fail on
Axles
(36 times worse than other 2012 cars)
- 3.0% fail on Swivel pins and bushes (38 times worse than other 2012 cars)
- 3.0% fail on Wheel bearings (7 times worse than other 2012 cars)
-
4.5% fail on
Suspension arms
-
4.5% fail on
Steering
-
3.0% fail on
Steering gear
(25 times worse than other 2012 cars)
- 3.0% fail on Steering rack (26 times worse than other 2012 cars)
-
1.5% fail on
Steering linkage components
-
1.5% fail on
Other components
- 1.5% fail on Steering linkage
-
1.5% fail on
Other components
-
3.0% fail on
Steering gear
(25 times worse than other 2012 cars)
-
4.5% fail on
Visibility
- 4.5% fail on Washers
- 1.5% fail on Wipers
-
4.5% fail on
Lamps, reflectors and electrical equipment
-
3.0% fail on
Headlamp aim
- 1.5% fail on Headlamp aim
- 1.5% fail on Headlamp aim not tested
-
1.5% fail on
Headlamps
- 1.5% fail on Headlamp
- 1.5% fail on Registration plate lamp(s)
-
3.0% fail on
Headlamp aim
-
1.5% fail on
Body, chassis, structure
- 1.5% fail on Exhaust system