MG Midget MOT Results
Registered in 198068.6% pass rate
from 258 tests in 2017
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1980 cars and highlighted areas where the MG Midget is unusually good or bad.
-
17% fail on
Lamps, Reflectors and Electrical Equipment
-
5.0% fail on
Position lamps
- 3.9% fail on Front lamps
- 1.2% fail on Rear lamps
- 0.78% fail on All position lamps
-
4.3% fail on
Headlamps
- 3.1% fail on Headlamp
- 0.78% fail on Switch (6 times worse than other 1980 cars)
- 0.39% fail on Dipswitch
- 4.3% fail on Stop lamp
-
3.9% fail on
Direction indicators
-
3.9% fail on
Flashing type
- 2.3% fail on All direction indicators
- 1.6% fail on Individual lamps
- 0.39% fail on Tell tales
-
3.9% fail on
Flashing type
- 3.1% fail on Horn
- 2.3% fail on Registration plate lamp
-
1.9% fail on
Rear fog lamp
- 1.9% fail on Fog lamp
- 0.39% fail on Tell tale
- 0.39% fail on Switch
- 1.9% fail on Headlamp aim
-
1.6% fail on
Hazard warning
- 1.6% fail on Lamp
- 0.39% fail on Battery
- 0.39% fail on Headlamp aim not tested
-
5.0% fail on
Position lamps
-
11% fail on
Exhaust, Fuel and Emissions
- 8.1% fail on Emissions
- 3.1% fail on Exhaust system
-
1.2% fail on
Fuel system
- 0.78% fail on System
- 0.39% fail on Pipe
-
10% fail on
Suspension
-
3.9% fail on
Prescribed areas
- 3.1% fail on Component mounting
- 1.6% fail on Spring mounting
-
2.3% fail on
Wheel bearings
- 2.3% fail on Front
-
1.9% fail on
Leaf springs
(2 times worse than other 1980 cars)
-
1.6% fail on
Pins and bushes
(4 times worse than other 1980 cars)
- 0.78% fail on Shackle
- 0.78% fail on Anchor (8 times worse than other 1980 cars)
- 0.39% fail on Condition
-
1.6% fail on
Pins and bushes
(4 times worse than other 1980 cars)
-
1.2% fail on
Axles
- 1.2% fail on King pins (4 times worse than other 1980 cars)
-
0.78% fail on
Shock absorbers
- 0.78% fail on Condition
-
0.39% fail on
Tie bars/rods
- 0.39% fail on Pins/bushes/ball joints
-
0.39% fail on
Panhard rods
- 0.39% fail on Pins/bushes/ball joints
-
0.39% fail on
Torque/reaction arms
- 0.39% fail on Pins/bushes/ball joints
-
0.39% fail on
Anti-roll bars
- 0.39% fail on Linkage condition
-
3.9% fail on
Prescribed areas
-
9.7% fail on
Brakes
-
6.2% fail on
Brake performance
- 3.5% fail on Front wheels
- 2.3% fail on Rear wheels
- 1.9% fail on Service brake performance
- 1.2% fail on Parking brake performance
-
1.6% fail on
Parking brake
- 1.6% fail on Condition
-
1.6% fail on
Hydraulic systems
-
1.6% fail on
Components
- 1.2% fail on Hoses
- 0.39% fail on Pipes
-
1.6% fail on
Components
-
1.2% fail on
Service brake control components
-
1.2% fail on
Pedal
- 1.2% fail on Anti-slip (3 times worse than other 1980 cars)
-
1.2% fail on
Pedal
- 0.39% fail on Restricted movement
-
0.39% fail on
Prescribed areas
- 0.39% fail on Master cylinder/servo mounting
-
6.2% fail on
Brake performance
-
8.9% fail on
Driver's view of the road
- 7.0% fail on Washers
- 1.2% fail on Wipers
- 0.78% fail on Mirrors
-
5.4% fail on
Steering
-
4.3% fail on
Steering system
- 2.3% fail on Track rod end
- 0.78% fail on Steering rack
-
0.39% fail on
Free play
- 0.39% fail on Steering rack
- 0.39% fail on Ball joint
-
0.39% fail on
Other components
- 0.39% fail on Steering pivot point
-
0.78% fail on
Steering control
- 0.39% fail on Steering column
- 0.39% fail on Steering shaft
- 0.39% fail on Locking devices
-
4.3% fail on
Steering system
-
2.7% fail on
Tyres
- 1.2% fail on Condition
- 1.2% fail on Tread depth
- 0.39% fail on Size/type
-
1.2% fail on
Seat Belts and Supplementary Restraint Systems
-
1.2% fail on
Seat belts
- 1.2% fail on Prescribed areas
-
1.2% fail on
Seat belts
-
1.2% fail on
Body, Structure and General Items
- 0.78% fail on Body condition
- 0.39% fail on Speedometer
-
0.39% fail on
Road Wheels
- 0.39% fail on Attachment
-
0.39% fail on
Registration plates and VIN
- 0.39% fail on Registration plate