MG MGB MOT Results
Registered in 198268.5% pass rate
from 54 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1982 cars and highlighted areas where the MG MGB is unusually good or bad.
-
11% fail on
Visibility
- 7.4% fail on Washers
- 3.7% fail on Wipers
-
11% fail on
Lamps, reflectors and electrical equipment
-
3.7% fail on
Headlamp aim
- 3.7% fail on Headlamp aim
- 3.7% fail on Stop lamp
-
1.9% fail on
Direction indicators
-
1.9% fail on
Flashing type
- 1.9% fail on All direction indicators
-
1.9% fail on
Flashing type
-
1.9% fail on
Front and rear fog lamps
-
1.9% fail on
Rear fog lamp
- 1.9% fail on Rear fog lamp
-
1.9% fail on
Rear fog lamp
-
1.9% fail on
Mandatory tell-tales
- 1.9% fail on Rear fog lamp tell-tale
-
3.7% fail on
Headlamp aim
-
11% fail on
Noise, emissions and leaks
-
9.3% fail on
Exhaust emissions
-
9.3% fail on
Spark ignition
- 7.4% fail on Non catalyst emissions
- 1.9% fail on Emissions not tested
-
9.3% fail on
Spark ignition
-
1.9% fail on
Fluid leaks
- 1.9% fail on Other leaks
-
9.3% fail on
Exhaust emissions
-
5.6% fail on
Brakes
-
3.7% fail on
Brake performance
-
1.9% fail on
Service brake performance
-
1.9% fail on
Rbt
- 1.9% fail on Service brake performance
-
1.9% fail on
Rbt
- 1.9% fail on Brake performance not tested
-
1.9% fail on
Service Brake Efficiency (sp)
-
1.9% fail on
Rbt (sp)
- 1.9% fail on Service brake imbalance
-
1.9% fail on
Rbt (sp)
-
1.9% fail on
Parking brake performance
-
1.9% fail on
Rbt
- 1.9% fail on Parking brake performance
- 1.9% fail on Parking (secondary brake performance)
-
1.9% fail on
Rbt
-
1.9% fail on
Service brake performance
- 1.9% fail on Rigid brake pipes
-
3.7% fail on
Brake performance
-
5.6% fail on
Suspension
- 1.9% fail on Wheel bearings
-
1.9% fail on
Springs
-
1.9% fail on
Leaf springs
- 1.9% fail on Leaf spring
-
1.9% fail on
Leaf springs
- 1.9% fail on Shock absorbers
-
1.9% fail on
Suspension arms
- 1.9% fail on Pins and bushes
-
1.9% fail on
Anti-roll bars
- 1.9% fail on Pins and bushes
- 1.9% fail on Component mounting prescribed areas
-
3.7% fail on
Steering
-
1.9% fail on
Steering gear
- 1.9% fail on Steering rack
-
1.9% fail on
Steering linkage components
- 1.9% fail on Track rod end
-
1.9% fail on
Steering gear
-
3.7% fail on
Body, chassis, structure
- 1.9% fail on Exhaust system
-
1.9% fail on
Engine mounting
- 1.9% fail on Engine mounting condition
-
1.9% fail on
Seat belts and supplementary restraint systems
-
1.9% fail on
Seat belts
- 1.9% fail on Condition
-
1.9% fail on
Seat belts
-
1.9% fail on
Tyres
- 1.9% fail on Tread depth