MG MG6 MOT Results
Registered in 201360.0% pass rate
from 250 tests in 2021
(46% worse than other 2013 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2013 cars and highlighted areas where the MG MG6 is unusually good or bad.
-
16% fail on
Lamps, reflectors and electrical equipment
(99% worse than other 2013 cars)
-
6.0% fail on
Headlamps
(190% worse than other 2013 cars)
- 6.0% fail on Headlamp (2 times worse than other 2013 cars)
-
4.8% fail on
Headlamp aim
(110% worse than other 2013 cars)
- 4.0% fail on Headlamp aim
- 0.80% fail on Headlamp aim not tested
-
2.4% fail on
Front and rear fog lamps
(6 times worse than other 2013 cars)
-
2.4% fail on
Rear fog lamp
(6 times worse than other 2013 cars)
- 2.4% fail on Rear fog lamp (6 times worse than other 2013 cars)
-
2.4% fail on
Rear fog lamp
(6 times worse than other 2013 cars)
- 2.4% fail on Registration plate lamp(s)
-
2.0% fail on
Direction indicators
-
2.0% fail on
Flashing type
- 1.2% fail on Side repeaters
- 0.40% fail on All direction indicators
- 0.40% fail on Individual direction indicators
-
2.0% fail on
Flashing type
- 0.40% fail on Stop lamp
-
0.40% fail on
Hazard warning
- 0.40% fail on Switch
-
0.40% fail on
Reversing lamps
- 0.40% fail on Reversing lamps
-
6.0% fail on
Headlamps
(190% worse than other 2013 cars)
-
12% fail on
Suspension
-
7.2% fail on
Suspension arms
(190% worse than other 2013 cars)
- 4.8% fail on Ball joint (2 times worse than other 2013 cars)
- 2.4% fail on Pins and bushes
-
4.0% fail on
Anti-roll bars
(3 times worse than other 2013 cars)
- 2.8% fail on Linkage ball joints (9 times worse than other 2013 cars)
- 0.80% fail on Ball joint (8 times worse than other 2013 cars)
- 0.40% fail on Linkage ball joint dust cover
- 0.80% fail on Wheel bearings
- 0.80% fail on Shock absorbers
-
0.80% fail on
Sub-frames
(20 times worse than other 2013 cars)
- 0.40% fail on Sub-frame
- 0.40% fail on Pins and bushes
-
0.80% fail on
Other suspension component
(5 times worse than other 2013 cars)
- 0.80% fail on Ball joint (10 times worse than other 2013 cars)
-
0.40% fail on
Springs
-
0.40% fail on
Coil springs
- 0.40% fail on Coil spring
-
0.40% fail on
Coil springs
-
7.2% fail on
Suspension arms
(190% worse than other 2013 cars)
-
10% fail on
Brakes
(100% worse than other 2013 cars)
- 5.6% fail on Rigid brake pipes (17 times worse than other 2013 cars)
-
3.6% fail on
Brake performance
-
2.4% fail on
Parking brake efficiency (sp)
(2 times worse than other 2013 cars)
- 2.4% fail on Rbt (sp) (2 times worse than other 2013 cars)
-
0.80% fail on
Service brake performance
-
0.80% fail on
Rbt
- 0.80% fail on Service brake performance
- 0.40% fail on Service brake imbalance
-
0.80% fail on
Rbt
-
0.40% fail on
Service Brake Efficiency (sp)
-
0.40% fail on
Rbt (sp)
- 0.40% fail on Service brake imbalance
-
0.40% fail on
Rbt (sp)
-
2.4% fail on
Parking brake efficiency (sp)
(2 times worse than other 2013 cars)
-
1.6% fail on
ABS / EBS / ESC
(4 times worse than other 2013 cars)
- 1.2% fail on Anti-lock braking system (5 times worse than other 2013 cars)
- 0.40% fail on Electronic stability control
-
0.80% fail on
Mechanical brake components
-
0.80% fail on
Brake linings and pads
- 0.80% fail on Brake pads
-
0.80% fail on
Brake linings and pads
-
0.40% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 0.40% fail on Hydraulic brake callipers
-
8.8% fail on
Visibility
(110% worse than other 2013 cars)
- 5.6% fail on Wipers (150% worse than other 2013 cars)
- 2.8% fail on Washers
-
0.40% fail on
View to rear
- 0.40% fail on Mirrors
-
6.4% fail on
Tyres
- 3.2% fail on Condition
- 3.2% fail on Tread depth
-
2.4% fail on
Body, chassis, structure
- 0.80% fail on Exhaust system
-
0.80% fail on
Doors
(6 times worse than other 2013 cars)
-
0.40% fail on
Front passenger's door
- 0.40% fail on Door condition
-
0.40% fail on
Other passenger's door
- 0.40% fail on Door condition
-
0.40% fail on
Front passenger's door
- 0.40% fail on Bumpers
- 0.40% fail on Undertray
-
1.2% fail on
Noise, emissions and leaks
-
1.2% fail on
Exhaust emissions
-
0.80% fail on
Compression ignition
- 0.80% fail on Malfunction indicator lamp
- 0.40% fail on Emissions not tested
-
0.40% fail on
Spark ignition
- 0.40% fail on Malfunction indicator lamp
-
0.80% fail on
Compression ignition
-
1.2% fail on
Exhaust emissions
-
0.80% fail on
Seat belts and supplementary restraint systems
-
0.40% fail on
Seat belts
- 0.40% fail on Condition
- 0.40% fail on SRS malfunction indicator lamp
-
0.40% fail on
Seat belts
-
0.40% fail on
Road Wheels
- 0.40% fail on Attachment
Read the Honest John Review
-
MG 6 (2011 - 2016)
Spacious cabin with enough room for a family and a large boot. Decent performance and handling. Much improved from 2015.