Mercedes-Benz SLK MOT Results
Registered in 199664.5% pass rate
from 62 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1996 cars and highlighted areas where the Mercedes-Benz SLK is unusually good or bad.
-
18% fail on
Lamps, reflectors and electrical equipment
-
8.1% fail on
Headlamp aim
- 8.1% fail on Headlamp aim
-
4.8% fail on
Headlamps
- 3.2% fail on Headlamp
- 1.6% fail on Headlamp levelling device
- 4.8% fail on Stop lamp
-
1.6% fail on
Direction indicators
-
1.6% fail on
Flashing type
- 1.6% fail on All direction indicators
-
1.6% fail on
Flashing type
-
1.6% fail on
Hazard warning
- 1.6% fail on Switch
- 1.6% fail on Registration plate lamp(s)
-
8.1% fail on
Headlamp aim
-
9.7% fail on
Visibility
- 6.5% fail on Wipers
- 6.5% fail on Washers
-
8.1% fail on
Body, chassis, structure
-
3.2% fail on
Integral vehicle structure
- 3.2% fail on Integral vehicle structure condition
- 1.6% fail on Exhaust system
-
1.6% fail on
Transmission
-
1.6% fail on
Prop shafts
- 1.6% fail on Prop shaft
-
1.6% fail on
Prop shafts
-
1.6% fail on
Boot lid
- 1.6% fail on Boot lid condition
-
3.2% fail on
Integral vehicle structure
-
8.1% fail on
Tyres
- 8.1% fail on Tread depth (4 times worse than other 1996 cars)
-
4.8% fail on
Suspension
-
3.2% fail on
Anti-roll bars
- 3.2% fail on Pins and bushes (12 times worse than other 1996 cars)
-
1.6% fail on
Springs
-
1.6% fail on
Coil springs
- 1.6% fail on Coil spring
-
1.6% fail on
Coil springs
-
1.6% fail on
Sub-frames
- 1.6% fail on Pins and bushes
-
1.6% fail on
Other suspension component
- 1.6% fail on Ball joint
-
3.2% fail on
Anti-roll bars
-
3.2% fail on
Brakes
- 1.6% fail on Rigid brake pipes
-
1.6% fail on
Brake performance
-
1.6% fail on
Parking brake efficiency (sp)
- 1.6% fail on Rbt (sp)
-
1.6% fail on
Parking brake efficiency (sp)
-
3.2% fail on
Steering
-
3.2% fail on
Steering linkage components
- 3.2% fail on Track rod end
- 1.6% fail on Drag link end
-
3.2% fail on
Steering linkage components
-
1.6% fail on
Identification of the vehicle
- 1.6% fail on Registration plates
-
1.6% fail on
Seat belts and supplementary restraint systems
- 1.6% fail on SRS malfunction indicator lamp
-
1.6% fail on
Noise, emissions and leaks
-
1.6% fail on
Exhaust emissions
-
1.6% fail on
Spark ignition
- 1.6% fail on Catalyst emissions
-
1.6% fail on
Spark ignition
-
1.6% fail on
Exhaust emissions