Mercedes-Benz CLA MOT Results
Registered in 200774.2% pass rate
from 182 tests in 2021
(38% better than other 2007 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2007 cars and highlighted areas where the Mercedes-Benz CLA is unusually good or bad.
-
10% fail on
Lamps, reflectors and electrical equipment
-
3.8% fail on
Headlamp aim
- 2.7% fail on Headlamp aim
- 1.1% fail on Headlamp aim not tested
- 3.3% fail on Stop lamp
-
2.7% fail on
Headlamps
- 2.7% fail on Headlamp
-
2.2% fail on
Direction indicators
-
2.2% fail on
Flashing type
- 2.2% fail on Individual direction indicators
-
2.2% fail on
Flashing type
- 2.2% fail on Registration plate lamp(s)
-
3.8% fail on
Headlamp aim
-
8.2% fail on
Brakes
-
4.9% fail on
Brake performance
-
3.8% fail on
Parking brake efficiency (sp)
- 3.8% fail on Rbt (sp)
-
1.6% fail on
Service brake performance
-
1.6% fail on
Rbt
- 1.1% fail on Service brake imbalance
- 0.55% fail on Service brake performance
-
1.6% fail on
Rbt
-
1.6% fail on
Service Brake Efficiency (sp)
-
1.6% fail on
Rbt (sp)
- 1.1% fail on Service brake performance
- 1.1% fail on Service brake imbalance
-
1.6% fail on
Rbt (sp)
- 0.55% fail on Brake performance not tested
-
0.55% fail on
Parking brake performance
-
0.55% fail on
Rbt
- 0.55% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
-
0.55% fail on
Rbt
-
3.8% fail on
Parking brake efficiency (sp)
-
2.2% fail on
ABS / EBS / ESC
- 1.1% fail on Anti-lock braking system
- 1.1% fail on Electronic stability control
- 1.6% fail on Rigid brake pipes
-
1.1% fail on
Mechanical brake components
-
1.1% fail on
Brake discs and drums
- 1.1% fail on Brake discs
-
0.55% fail on
Brake linings and pads
- 0.55% fail on Brake pads
-
1.1% fail on
Brake discs and drums
-
0.55% fail on
Air and vacuum systems
- 0.55% fail on Leaks
-
0.55% fail on
Parking brake control
- 0.55% fail on Lever
-
4.9% fail on
Brake performance
-
6.6% fail on
Suspension
(60% better than other 2007 cars)
-
2.7% fail on
Suspension arms
- 2.7% fail on Ball joint
- 1.1% fail on Shock absorbers
-
1.1% fail on
Anti-roll bars
- 0.55% fail on Pins and bushes
- 0.55% fail on Ball joint dust cover
-
0.55% fail on
Axles
- 0.55% fail on King pins
- 0.55% fail on Wheel bearings
-
0.55% fail on
Springs
-
0.55% fail on
Leaf springs
- 0.55% fail on Leaf spring
-
0.55% fail on
Leaf springs
-
0.55% fail on
Macpherson strut
- 0.55% fail on Attachment bracket and mounting
-
2.7% fail on
Suspension arms
-
3.8% fail on
Noise, emissions and leaks
-
3.8% fail on
Exhaust emissions
-
2.2% fail on
Spark ignition
- 1.1% fail on Malfunction indicator lamp
- 1.1% fail on Emissions not tested
- 0.55% fail on Catalyst emissions
-
1.6% fail on
Compression ignition
- 1.1% fail on Malfunction indicator lamp
- 0.55% fail on Pre 01/07/2008 Turbo
- 0.55% fail on On or after 01/01/2014
- 0.55% fail on Emissions not tested
-
2.2% fail on
Spark ignition
-
3.8% fail on
Exhaust emissions
-
3.3% fail on
Tyres
- 1.6% fail on Condition
- 1.6% fail on Tread depth
-
2.2% fail on
Steering
-
1.6% fail on
Steering linkage components
- 1.6% fail on Track rod end
-
0.55% fail on
Steering play
- 0.55% fail on Steering rack
-
1.6% fail on
Steering linkage components
-
2.2% fail on
Visibility
- 1.6% fail on Washers
- 1.1% fail on Wipers
-
1.6% fail on
Seat belts and supplementary restraint systems
- 1.6% fail on SRS malfunction indicator lamp
-
1.1% fail on
Identification of the vehicle
- 1.1% fail on Registration plates
-
1.1% fail on
Body, chassis, structure
(84% better than other 2007 cars)
-
0.55% fail on
Integral vehicle structure
- 0.55% fail on Integral vehicle structure condition
-
0.55% fail on
Doors
-
0.55% fail on
Front passenger's door
- 0.55% fail on Door condition
-
0.55% fail on
Front passenger's door
-
0.55% fail on
Seats
- 0.55% fail on Passenger's seat
-
0.55% fail on
Integral vehicle structure
-
0.55% fail on
Speedometer and speed limiter
- 0.55% fail on Speedometer