Mercedes-Benz CLA MOT Results
Registered in 200174.2% pass rate
from 93 tests in 2017
(48% better than other 2001 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2001 cars and highlighted areas where the Mercedes-Benz CLA is unusually good or bad.
-
13% fail on
Lamps, Reflectors and Electrical Equipment
(50% better than other 2001 cars)
-
5.4% fail on
Direction indicators
-
5.4% fail on
Flashing type
- 5.4% fail on Individual lamps
-
5.4% fail on
Flashing type
- 3.2% fail on Registration plate lamp
-
2.2% fail on
Position lamps
- 1.1% fail on Front lamps
- 1.1% fail on Rear lamps
- 2.2% fail on Stop lamp
- 2.2% fail on Headlamp aim
- 2.2% fail on Horn
- 1.1% fail on Electrical wiring
-
1.1% fail on
Rear fog lamp
- 1.1% fail on Switch
-
1.1% fail on
Headlamps
- 1.1% fail on Headlamp
-
1.1% fail on
Hazard warning
- 1.1% fail on Lamp
-
5.4% fail on
Direction indicators
-
12% fail on
Brakes
-
6.5% fail on
Brake performance
- 4.3% fail on Parking brake performance
- 2.2% fail on Front wheels
- 1.1% fail on Service brake performance
-
5.4% fail on
Hydraulic systems
-
3.2% fail on
Components
- 3.2% fail on Pipes
- 1.1% fail on Operation
- 1.1% fail on Leaks
-
3.2% fail on
Components
- 2.2% fail on ABS
- 1.1% fail on Electronic stability system
-
1.1% fail on
Hub components
- 1.1% fail on Brake pads
-
6.5% fail on
Brake performance
-
11% fail on
Suspension
(51% better than other 2001 cars)
-
6.5% fail on
Suspension arms
- 5.4% fail on Pins/bushes/ball joints
- 1.1% fail on Attachment
-
4.3% fail on
Anti-roll bars
- 2.2% fail on Linkage pins/bushes/ball joints
- 2.2% fail on Attachment (12 times worse than other 2001 cars)
-
2.2% fail on
Prescribed areas
- 1.1% fail on Component mounting
- 1.1% fail on Spring mounting
-
1.1% fail on
Coil springs
- 1.1% fail on Location
-
1.1% fail on
Fluid suspension
- 1.1% fail on Pipes
-
1.1% fail on
Air suspension
- 1.1% fail on Levelling valve
- 1.1% fail on Front suspension joints
-
6.5% fail on
Suspension arms
-
7.5% fail on
Tyres
- 4.3% fail on Condition
- 3.2% fail on Tread depth
-
6.5% fail on
Body, Structure and General Items
-
2.2% fail on
Vehicle structure
- 2.2% fail on Chassis
- 2.2% fail on Body condition
-
2.2% fail on
Doors
- 1.1% fail on Drivers
- 1.1% fail on Passengers front
- 1.1% fail on Body security
-
2.2% fail on
Vehicle structure
-
5.4% fail on
Driver's view of the road
- 5.4% fail on Wipers
- 2.2% fail on Washers
-
2.2% fail on
Steering
-
2.2% fail on
Steering system
- 1.1% fail on Ball joint
- 1.1% fail on Drag link end
-
2.2% fail on
Steering system
-
1.1% fail on
Exhaust, Fuel and Emissions
- 1.1% fail on Exhaust system
-
1.1% fail on
Driving Controls and Speed Limiters
- 1.1% fail on Speed limiter