Mercedes-Benz CLA MOT Results
Registered in 200067.1% pass rate
from 70 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2000 cars and highlighted areas where the Mercedes-Benz CLA is unusually good or bad.
-
13% fail on
Brakes
-
7.1% fail on
Brake performance
-
4.3% fail on
Service brake performance
-
4.3% fail on
Rbt
- 4.3% fail on Service brake performance
-
4.3% fail on
Rbt
-
2.9% fail on
Service Brake Efficiency (sp)
-
2.9% fail on
Rbt (sp)
- 2.9% fail on Service brake performance
-
2.9% fail on
Rbt (sp)
-
4.3% fail on
Service brake performance
-
4.3% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
(17 times worse than other 2000 cars)
- 2.9% fail on Hydraulic brake callipers (19 times worse than other 2000 cars)
- 1.4% fail on Air brake cylinder/actuator
- 2.9% fail on Rigid brake pipes
-
1.4% fail on
Hand operated control valves
- 1.4% fail on Attachment
- 1.4% fail on Flexible brake hoses
- 1.4% fail on Load sensing valves
-
1.4% fail on
Mechanical brake components
-
1.4% fail on
Brake discs and drums
- 1.4% fail on Brake discs
-
1.4% fail on
Brake discs and drums
-
7.1% fail on
Brake performance
-
13% fail on
Lamps, reflectors and electrical equipment
-
5.7% fail on
Headlamp aim
- 5.7% fail on Headlamp aim
-
2.9% fail on
Front and rear fog lamps
-
2.9% fail on
Rear fog lamp
- 2.9% fail on Rear fog lamp
-
2.9% fail on
Rear fog lamp
-
2.9% fail on
Mandatory tell-tales
(27 times worse than other 2000 cars)
- 2.9% fail on Rear fog lamp tell-tale (39 times worse than other 2000 cars)
-
1.4% fail on
Headlamps
- 1.4% fail on Headlamp
-
5.7% fail on
Headlamp aim
-
10% fail on
Steering
-
10% fail on
Steering linkage components
(3 times worse than other 2000 cars)
- 4.3% fail on Track rod end
- 2.9% fail on Ball joint (10 times worse than other 2000 cars)
- 2.9% fail on Drag link end (16 times worse than other 2000 cars)
-
10% fail on
Steering linkage components
(3 times worse than other 2000 cars)
-
8.6% fail on
Suspension
-
2.9% fail on
Springs
-
2.9% fail on
Coil springs
- 2.9% fail on Coil spring
-
2.9% fail on
Coil springs
-
2.9% fail on
Suspension arms
- 1.4% fail on Suspension arm
- 1.4% fail on Ball joint
- 1.4% fail on Wheel bearings
- 1.4% fail on Shock absorbers
-
1.4% fail on
Anti-roll bars
- 1.4% fail on Pins and bushes
-
1.4% fail on
Air/gas/fluid suspension
- 1.4% fail on Suspension unit
-
2.9% fail on
Springs
-
7.1% fail on
Visibility
- 5.7% fail on Wipers
- 1.4% fail on Bonnet
- 1.4% fail on Washers
-
5.7% fail on
Body, chassis, structure
- 2.9% fail on Exhaust system
-
2.9% fail on
Seats
(8 times worse than other 2000 cars)
- 1.4% fail on Driver's seat
- 1.4% fail on Passenger's seat
-
1.4% fail on
Integral vehicle structure
- 1.4% fail on Integral vehicle structure condition
-
2.9% fail on
Noise, emissions and leaks
-
1.4% fail on
Exhaust emissions
-
1.4% fail on
Compression ignition
- 1.4% fail on Pre 01/07/2008 Non turbo
-
1.4% fail on
Compression ignition
-
1.4% fail on
Fluid leaks
- 1.4% fail on Hydraulic fluid leaks
-
1.4% fail on
Exhaust emissions
-
2.9% fail on
Tyres
- 1.4% fail on Condition
- 1.4% fail on Tread depth
-
1.4% fail on
Identification of the vehicle
- 1.4% fail on Registration plates
-
1.4% fail on
Speedometer and speed limiter
- 1.4% fail on Speedometer
-
1.4% fail on
Seat belts and supplementary restraint systems
- 1.4% fail on SRS malfunction indicator lamp