Mercedes-Benz 190 MOT Results
Registered in 198775.0% pass rate
from 96 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1987 cars and highlighted areas where the Mercedes-Benz 190 is unusually good or bad.
-
13% fail on
Lamps, reflectors and electrical equipment
-
5.2% fail on
Headlamp aim
- 5.2% fail on Headlamp aim
-
3.1% fail on
Headlamps
- 2.1% fail on Headlamp
- 1.0% fail on Headlamp levelling device
- 3.1% fail on Stop lamp
-
2.1% fail on
Direction indicators
-
2.1% fail on
Flashing type
- 1.0% fail on Individual direction indicators
- 1.0% fail on Side repeaters
-
2.1% fail on
Flashing type
-
1.0% fail on
Front and rear fog lamps
-
1.0% fail on
Rear fog lamp
- 1.0% fail on Rear fog lamp
-
1.0% fail on
Rear fog lamp
- 1.0% fail on Registration plate lamp(s)
-
1.0% fail on
Electrical equipment
- 1.0% fail on Battery(ies)
-
5.2% fail on
Headlamp aim
-
7.3% fail on
Brakes
-
3.1% fail on
Brake performance
-
2.1% fail on
Service brake performance
-
2.1% fail on
Rbt
- 1.0% fail on Service brake performance
- 1.0% fail on Service brake imbalance
-
2.1% fail on
Rbt
-
2.1% fail on
Parking brake efficiency (sp)
- 2.1% fail on Rbt (sp)
-
1.0% fail on
Service Brake Efficiency (sp)
-
1.0% fail on
Rbt (sp)
- 1.0% fail on Service brake imbalance
-
1.0% fail on
Rbt (sp)
-
1.0% fail on
Parking brake performance
-
1.0% fail on
Rbt
- 1.0% fail on Parking brake performance
-
1.0% fail on
Rbt
-
2.1% fail on
Service brake performance
- 2.1% fail on Rigid brake pipes
-
1.0% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 1.0% fail on Hydraulic brake cylinder
-
1.0% fail on
Other components and prescribed areas
-
1.0% fail on
Prescribed areas
- 1.0% fail on Master cylinder/servo mounting
-
1.0% fail on
Prescribed areas
-
1.0% fail on
Mechanical brake components
-
1.0% fail on
Brake linings and pads
- 1.0% fail on Brake pads
-
1.0% fail on
Brake linings and pads
-
3.1% fail on
Brake performance
-
7.3% fail on
Suspension
- 5.2% fail on Component mounting prescribed areas
-
3.1% fail on
Suspension arms
- 3.1% fail on Ball joint dust cover (3 times worse than other 1987 cars)
- 1.0% fail on Ball joint
-
6.3% fail on
Noise, emissions and leaks
-
6.3% fail on
Exhaust emissions
-
6.3% fail on
Spark ignition
- 4.2% fail on Non catalyst emissions
- 2.1% fail on Catalyst emissions (5 times worse than other 1987 cars)
-
6.3% fail on
Spark ignition
-
6.3% fail on
Exhaust emissions
-
5.2% fail on
Body, chassis, structure
-
2.1% fail on
Integral vehicle structure
- 2.1% fail on Integral vehicle structure condition
-
1.0% fail on
Chassis
- 1.0% fail on Chassis condition
- 1.0% fail on Exhaust system
-
1.0% fail on
Transmission
-
1.0% fail on
Prop shafts
- 1.0% fail on Flexible couplings
-
1.0% fail on
Prop shafts
-
2.1% fail on
Integral vehicle structure
-
2.1% fail on
Steering
-
1.0% fail on
Power steering
- 1.0% fail on Pipes and hoses
-
1.0% fail on
Steering play
- 1.0% fail on Steering box
-
1.0% fail on
Power steering
-
2.1% fail on
Visibility
- 1.0% fail on Wipers
- 1.0% fail on Washers
-
1.0% fail on
Seat belts and supplementary restraint systems
-
1.0% fail on
Seat belts
- 1.0% fail on Prescribed areas
-
1.0% fail on
Seat belts
-
1.0% fail on
Road Wheels
- 1.0% fail on Attachment