Mazda Demio MOT Results
Registered in 199950.4% pass rate
from 127 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1999 cars and highlighted areas where the Mazda Demio is unusually good or bad.
-
24% fail on
Suspension
(67% worse than other 1999 cars)
- 13% fail on Component mounting prescribed areas (180% worse than other 1999 cars)
-
7.1% fail on
Suspension arms
- 3.9% fail on Ball joint
- 3.1% fail on Ball joint dust cover
- 1.6% fail on Wheel bearings
- 1.6% fail on Shock absorbers
-
1.6% fail on
Sub-frames
- 1.6% fail on Sub-frame mounting prescribed areas
-
18% fail on
Lamps, reflectors and electrical equipment
-
7.1% fail on
Headlamps
- 4.7% fail on Headlamp
- 2.4% fail on Headlamp levelling device (6 times worse than other 1999 cars)
- 6.3% fail on Stop lamp
-
4.7% fail on
Headlamp aim
- 4.7% fail on Headlamp aim
-
1.6% fail on
Front and rear fog lamps
-
1.6% fail on
Rear fog lamp
- 1.6% fail on Rear fog lamp
-
1.6% fail on
Rear fog lamp
- 1.6% fail on Registration plate lamp(s)
-
0.79% fail on
Electrical equipment
- 0.79% fail on Horn
-
7.1% fail on
Headlamps
-
17% fail on
Body, chassis, structure
-
13% fail on
Transmission
(3 times worse than other 1999 cars)
-
13% fail on
Drive shafts
(3 times worse than other 1999 cars)
- 13% fail on Joints (3 times worse than other 1999 cars)
-
13% fail on
Drive shafts
(3 times worse than other 1999 cars)
-
3.1% fail on
Integral vehicle structure
- 3.1% fail on Integral vehicle structure condition
-
1.6% fail on
Body
- 1.6% fail on Panel (10 times worse than other 1999 cars)
-
0.79% fail on
Chassis
- 0.79% fail on Chassis condition
- 0.79% fail on Exhaust system
- 0.79% fail on Bumpers
-
13% fail on
Transmission
(3 times worse than other 1999 cars)
-
12% fail on
Brakes
- 7.9% fail on Rigid brake pipes (160% worse than other 1999 cars)
-
2.4% fail on
Brake performance
-
0.79% fail on
Service brake performance
-
0.79% fail on
Rbt
- 0.79% fail on Service brake performance
-
0.79% fail on
Rbt
- 0.79% fail on Brake performance not tested
-
0.79% fail on
Service Brake Efficiency (sp)
-
0.79% fail on
Rbt (sp)
- 0.79% fail on Service brake performance
-
0.79% fail on
Rbt (sp)
-
0.79% fail on
Service brake performance
-
1.6% fail on
Mechanical brake components
-
0.79% fail on
Brake linings and pads
- 0.79% fail on Brake pads
-
0.79% fail on
Brake discs and drums
- 0.79% fail on Brake discs
-
0.79% fail on
Brake linings and pads
-
0.79% fail on
Service brake pedal or hand lever
- 0.79% fail on Pedal
-
0.79% fail on
Parking brake control
- 0.79% fail on Lever
-
6.3% fail on
Visibility
- 5.5% fail on Wipers
- 1.6% fail on Washers
-
5.5% fail on
Noise, emissions and leaks
-
5.5% fail on
Exhaust emissions
-
4.7% fail on
Spark ignition
- 3.1% fail on Catalyst emissions
- 0.79% fail on Non catalyst emissions
- 0.79% fail on Emissions not tested
-
0.79% fail on
Compression ignition
- 0.79% fail on Emissions not tested
-
4.7% fail on
Spark ignition
-
5.5% fail on
Exhaust emissions
-
4.7% fail on
Tyres
- 2.4% fail on Tread depth
- 1.6% fail on Condition
- 0.79% fail on Size/type
-
3.1% fail on
Seat belts and supplementary restraint systems
-
3.1% fail on
Seat belts
- 3.1% fail on Prescribed areas
-
3.1% fail on
Seat belts
-
0.79% fail on
Identification of the vehicle
- 0.79% fail on Registration plates
-
0.79% fail on
Steering
-
0.79% fail on
Steering linkage components
- 0.79% fail on Track rod end
-
0.79% fail on
Steering linkage components