Mazda 323 MOT Results
Registered in 199451.7% pass rate
from 60 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1994 cars and highlighted areas where the Mazda 323 is unusually good or bad.
-
25% fail on
Suspension
(130% worse than other 1994 cars)
- 15% fail on Component mounting prescribed areas (2 times worse than other 1994 cars)
-
8.3% fail on
Anti-roll bars
(4 times worse than other 1994 cars)
- 3.3% fail on Linkage pins and bushes (8 times worse than other 1994 cars)
- 1.7% fail on Pins and bushes
- 1.7% fail on Linkage ball joints
- 1.7% fail on Linkage ball joint dust cover
- 3.3% fail on Shock absorbers
-
1.7% fail on
Suspension arms
- 1.7% fail on Ball joint
-
1.7% fail on
Sub-frames
- 1.7% fail on Sub-frame mounting prescribed areas
-
15% fail on
Brakes
-
13% fail on
Brake performance
-
6.7% fail on
Service brake performance
-
6.7% fail on
Rbt
- 5.0% fail on Service brake performance
- 1.7% fail on Service brake imbalance
-
6.7% fail on
Rbt
-
5.0% fail on
Service Brake Efficiency (sp)
-
5.0% fail on
Rbt (sp)
- 3.3% fail on Service brake imbalance
- 1.7% fail on Service brake performance
-
5.0% fail on
Rbt (sp)
-
5.0% fail on
Parking brake performance
(4 times worse than other 1994 cars)
-
5.0% fail on
Rbt
(5 times worse than other 1994 cars)
- 3.3% fail on Parking brake performance
- 1.7% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
-
5.0% fail on
Rbt
(5 times worse than other 1994 cars)
-
5.0% fail on
Parking brake efficiency (sp)
- 5.0% fail on Rbt (sp)
-
6.7% fail on
Service brake performance
-
1.7% fail on
Parking brake control
- 1.7% fail on Lever
- 1.7% fail on Rigid brake pipes
- 1.7% fail on Flexible brake hoses
-
1.7% fail on
Mechanical brake components
-
1.7% fail on
Brake cables, rods, levers and linkages
- 1.7% fail on Cable
-
1.7% fail on
Brake cables, rods, levers and linkages
-
13% fail on
Brake performance
-
12% fail on
Lamps, reflectors and electrical equipment
- 5.0% fail on Registration plate lamp(s)
-
3.3% fail on
Headlamps
- 3.3% fail on Headlamp
- 3.3% fail on Stop lamp
-
12% fail on
Body, chassis, structure
- 5.0% fail on Exhaust system
-
3.3% fail on
Transmission
-
3.3% fail on
Drive shafts
- 3.3% fail on Joints
-
3.3% fail on
Drive shafts
-
1.7% fail on
Body
- 1.7% fail on Panel
-
1.7% fail on
Seats
- 1.7% fail on Driver's seat
-
5.0% fail on
Visibility
- 5.0% fail on Wipers
-
3.3% fail on
Seat belts and supplementary restraint systems
-
3.3% fail on
Seat belts
- 3.3% fail on Prescribed areas
-
3.3% fail on
Seat belts
-
3.3% fail on
Noise, emissions and leaks
-
3.3% fail on
Exhaust emissions
-
3.3% fail on
Spark ignition
- 1.7% fail on Catalyst emissions
- 1.7% fail on Emissions not tested
-
3.3% fail on
Spark ignition
-
3.3% fail on
Exhaust emissions
-
3.3% fail on
Tyres
- 1.7% fail on Condition
- 1.7% fail on Tread depth
-
1.7% fail on
Steering
-
1.7% fail on
Steering linkage components
- 1.7% fail on Locking devices
-
1.7% fail on
Steering linkage components