Mazda 323 MOT Results

Registered in 1992

65.6% pass rate

from 32 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1992 cars and highlighted areas where the Mazda 323 is unusually good or bad.

16% fail on Suspension
- 16% fail on Component mounting prescribed areas (2 times worse than other 1992 cars)
16% fail on Body, chassis, structure
- 16% fail on Exhaust system (4 times worse than other 1992 cars)
- 3.1% fail on Integral vehicle structure
  - 3.1% fail on Integral vehicle structure condition
16% fail on Noise, emissions and leaks
- 16% fail on Exhaust emissions
  - 16% fail on Spark ignition
    - 9.4% fail on Catalyst emissions
    - 9.4% fail on Emissions not tested (8 times worse than other 1992 cars)
13% fail on Brakes
- 13% fail on Brake performance
  - 9.4% fail on Service brake performance
    - 9.4% fail on Rbt
      - 9.4% fail on Service brake performance
      - 3.1% fail on Service brake imbalance
  - 3.1% fail on Service Brake Efficiency (sp)
    - 3.1% fail on Rbt (sp)
      - 3.1% fail on Service brake imbalance
  - 3.1% fail on Parking brake efficiency (sp)
    - 3.1% fail on Rbt (sp)
- 3.1% fail on Flexible brake hoses
- 3.1% fail on Mechanical brake components
  - 3.1% fail on Brake discs and drums
    - 3.1% fail on Brake discs
13% fail on Lamps, reflectors and electrical equipment
- 3.1% fail on Headlamps
  - 3.1% fail on Headlamp
- 3.1% fail on Headlamp aim
  - 3.1% fail on Headlamp aim
- 3.1% fail on Stop lamp
- 3.1% fail on Direction indicators
  - 3.1% fail on Flashing type
    - 3.1% fail on Individual direction indicators
9.4% fail on Visibility
- 6.3% fail on Wipers
- 6.3% fail on Washers
3.1% fail on Seat belts and supplementary restraint systems
- 3.1% fail on Seat belts
  - 3.1% fail on Prescribed areas