LTI TX4 MOT Results

Registered in 2012
58.6% pass rate
from 1,547 tests in 2020
(58% worse than other 2012 cars)
Pass rate by mileage
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the LTI TX4 is unusually good or bad.

  • 23% fail on Suspension (2 times worse than other 2012 cars)
    • 14% fail on Suspension arms (5 times worse than other 2012 cars)
      • 9.3% fail on Pins and bushes (9 times worse than other 2012 cars)
      • 5.0% fail on Ball joint (4 times worse than other 2012 cars)
      • 2.0% fail on Ball joint dust cover (7 times worse than other 2012 cars)
      • 0.97% fail on Suspension arm (48 times worse than other 2012 cars)
      • 0.065% fail on Attachment bracket and mounting
    • 4.7% fail on Anti-roll bars (3 times worse than other 2012 cars)
      • 2.1% fail on Linkage ball joints (4 times worse than other 2012 cars)
      • 0.71% fail on Linkage (12 times worse than other 2012 cars)
      • 0.45% fail on Attachment bracket and mounting (125 times worse than other 2012 cars)
      • 0.32% fail on Anti-roll bar (34 times worse than other 2012 cars)
      • 0.32% fail on Pins and bushes (16 times worse than other 2012 cars)
      • 0.26% fail on Linkage ball joint dust cover
      • 0.19% fail on Ball joint
      • 0.19% fail on Ball joint dust cover
      • 0.13% fail on Linkage pins and bushes
    • 3.2% fail on Springs
      • 3.2% fail on Coil springs
        • 3.1% fail on Coil spring
        • 0.13% fail on Mounting (10 times worse than other 2012 cars)
    • 3.0% fail on Other suspension component (25 times worse than other 2012 cars)
      • 2.0% fail on Pins and bushes (68 times worse than other 2012 cars)
      • 0.97% fail on Ball joint (15 times worse than other 2012 cars)
      • 0.58% fail on Ball joint dust cover (26 times worse than other 2012 cars)
      • 0.32% fail on Other suspension component (67 times worse than other 2012 cars)
    • 2.8% fail on Wheel bearings (10 times worse than other 2012 cars)
    • 2.1% fail on Shock absorbers (190% worse than other 2012 cars)
    • 0.19% fail on Macpherson strut
      • 0.13% fail on Pins and bushes
      • 0.065% fail on Ball joint
    • 0.065% fail on Axles
      • 0.065% fail on Swivel pins and bushes
    • 0.065% fail on Suspension rods
      • 0.065% fail on Pins and bushes
    • 0.065% fail on Sub-frames
      • 0.065% fail on Pins and bushes
  • 16% fail on Lamps, reflectors and electrical equipment (80% worse than other 2012 cars)
    • 4.5% fail on Registration plate lamp(s) (2 times worse than other 2012 cars)
    • 3.9% fail on Headlamp aim (67% worse than other 2012 cars)
      • 3.8% fail on Headlamp aim (74% worse than other 2012 cars)
      • 0.13% fail on Headlamp aim not tested
    • 3.7% fail on Headlamps (77% worse than other 2012 cars)
      • 3.3% fail on Headlamp (68% worse than other 2012 cars)
      • 0.39% fail on Headlamp levelling device (6 times worse than other 2012 cars)
    • 3.4% fail on Direction indicators (160% worse than other 2012 cars)
      • 3.4% fail on Flashing type (160% worse than other 2012 cars)
        • 3.1% fail on Individual direction indicators (3 times worse than other 2012 cars)
        • 0.26% fail on Side repeaters
        • 0.065% fail on All direction indicators
    • 1.9% fail on Position lamps (65% worse than other 2012 cars)
      • 1.9% fail on Position lamp (69% worse than other 2012 cars)
    • 1.7% fail on Stop lamp
    • 0.84% fail on Electrical equipment (2 times worse than other 2012 cars)
      • 0.58% fail on Battery(ies) (12 times worse than other 2012 cars)
      • 0.19% fail on Horn
      • 0.065% fail on Electrical wiring
    • 0.58% fail on Front and rear fog lamps
      • 0.58% fail on Rear fog lamp
        • 0.58% fail on Rear fog lamp
    • 0.39% fail on Reversing lamps
      • 0.39% fail on Reversing lamps
  • 11% fail on Brakes (110% worse than other 2012 cars)
    • 4.3% fail on Brake performance (130% worse than other 2012 cars)
      • 3.2% fail on Parking brake efficiency (sp) (3 times worse than other 2012 cars)
        • 3.2% fail on Rbt (sp) (4 times worse than other 2012 cars)
      • 1.2% fail on Service brake performance
        • 1.1% fail on Rbt
          • 0.90% fail on Service brake performance
          • 0.19% fail on Service brake imbalance
        • 0.065% fail on Plate brake tester
          • 0.065% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
      • 0.52% fail on Service Brake Efficiency (sp)
        • 0.52% fail on Rbt (sp)
          • 0.45% fail on Service brake imbalance
          • 0.26% fail on Service brake performance
      • 0.39% fail on Parking brake performance
        • 0.39% fail on Rbt
          • 0.26% fail on Parking brake performance
          • 0.13% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles) (20 times worse than other 2012 cars)
      • 0.065% fail on Brake performance not tested
    • 2.7% fail on Mechanical brake components
      • 1.7% fail on Brake linings and pads
        • 1.7% fail on Brake pads
      • 0.97% fail on Brake cables, rods, levers and linkages (20 times worse than other 2012 cars)
        • 0.90% fail on Cable (30 times worse than other 2012 cars)
        • 0.065% fail on Lever
      • 0.19% fail on Brake discs and drums (75% better than other 2012 cars)
        • 0.19% fail on Brake discs (75% better than other 2012 cars)
    • 2.6% fail on Service brake pedal or hand lever (13 times worse than other 2012 cars)
      • 2.3% fail on Pedal (30 times worse than other 2012 cars)
      • 0.26% fail on Hand lever
    • 1.9% fail on ABS / EBS / ESC (7 times worse than other 2012 cars)
      • 1.8% fail on Anti-lock braking system (12 times worse than other 2012 cars)
      • 0.065% fail on Electronic braking system
    • 0.65% fail on Rigid brake pipes (180% worse than other 2012 cars)
    • 0.58% fail on Hydraulic systems (9 times worse than other 2012 cars)
      • 0.32% fail on Brake fluid (6 times worse than other 2012 cars)
      • 0.13% fail on Reservoirs (13 times worse than other 2012 cars)
      • 0.065% fail on Servos
      • 0.065% fail on Valves
    • 0.45% fail on Parking brake control
      • 0.39% fail on Lever
      • 0.065% fail on Electronic parking brake
    • 0.26% fail on Flexible brake hoses (2 times worse than other 2012 cars)
    • 0.19% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.13% fail on Hydraulic brake cylinder (11 times worse than other 2012 cars)
      • 0.065% fail on Hydraulic brake callipers
  • 9.2% fail on Noise, emissions and leaks (5 times worse than other 2012 cars)
    • 7.4% fail on Exhaust emissions (4 times worse than other 2012 cars)
      • 5.4% fail on Compression ignition (9 times worse than other 2012 cars)
        • 4.1% fail on Malfunction indicator lamp (12 times worse than other 2012 cars)
        • 1.3% fail on On or after 01/07/2008 (5 times worse than other 2012 cars)
        • 0.13% fail on Emissions not tested
        • 0.065% fail on Pre 01/07/2008 Turbo
      • 2.0% fail on Spark ignition (150% worse than other 2012 cars)
        • 1.9% fail on Malfunction indicator lamp (2 times worse than other 2012 cars)
        • 0.065% fail on Catalyst emissions
    • 2.7% fail on Fluid leaks (27 times worse than other 2012 cars)
      • 2.3% fail on Engine oil leaks (32 times worse than other 2012 cars)
      • 0.19% fail on Transmission oil leaks (25 times worse than other 2012 cars)
      • 0.13% fail on Other leaks (8 times worse than other 2012 cars)
  • 6.9% fail on Visibility (65% worse than other 2012 cars)
    • 3.7% fail on Washers (110% worse than other 2012 cars)
    • 3.2% fail on Wipers
    • 0.13% fail on Driver's view
    • 0.13% fail on Bonnet
    • 0.13% fail on View to rear
      • 0.13% fail on Mirrors
    • 0.065% fail on Condition of glass
      • 0.065% fail on Windscreen
  • 5.6% fail on Tyres
    • 4.3% fail on Tread depth
    • 0.90% fail on Tyre pressure monitoring system (62 times worse than other 2012 cars)
    • 0.32% fail on Condition (88% better than other 2012 cars)
  • 4.0% fail on Steering (3 times worse than other 2012 cars)
    • 2.9% fail on Steering linkage components (2 times worse than other 2012 cars)
      • 0.97% fail on Track rod end
      • 0.90% fail on Locking devices (118 times worse than other 2012 cars)
      • 0.84% fail on Drag link end (78 times worse than other 2012 cars)
      • 0.26% fail on Ball joint (6 times worse than other 2012 cars)
      • 0.065% fail on Other components
        • 0.065% fail on Steering linkage
    • 0.52% fail on Power steering (19 times worse than other 2012 cars)
      • 0.19% fail on Pump (183 times worse than other 2012 cars)
      • 0.13% fail on Operation (9 times worse than other 2012 cars)
      • 0.13% fail on Pipes and hoses (24 times worse than other 2012 cars)
      • 0.065% fail on Other components
    • 0.39% fail on Steering gear (4 times worse than other 2012 cars)
      • 0.32% fail on Steering box (487 times worse than other 2012 cars)
      • 0.065% fail on Operation
    • 0.13% fail on Prescribed areas (389 times worse than other 2012 cars)
    • 0.065% fail on Steering play
      • 0.065% fail on Steering box
  • 3.3% fail on Body, chassis, structure (93% worse than other 2012 cars)
    • 1.2% fail on Doors (10 times worse than other 2012 cars)
      • 0.97% fail on Driver's door (31 times worse than other 2012 cars)
        • 0.97% fail on Door condition (35 times worse than other 2012 cars)
      • 0.13% fail on Front passenger's door
        • 0.065% fail on Door condition
        • 0.065% fail on Hinge
      • 0.065% fail on Other passenger's door
        • 0.065% fail on Catch
    • 0.71% fail on Fuel system (4 times worse than other 2012 cars)
      • 0.65% fail on Tank (56 times worse than other 2012 cars)
      • 0.065% fail on Hose
    • 0.39% fail on Chassis (100 times worse than other 2012 cars)
      • 0.39% fail on Chassis condition (110 times worse than other 2012 cars)
    • 0.32% fail on Seats (6 times worse than other 2012 cars)
      • 0.26% fail on Driver's seat (8 times worse than other 2012 cars)
      • 0.065% fail on Passenger's seat
    • 0.26% fail on Exhaust system
    • 0.26% fail on Bumpers (2 times worse than other 2012 cars)
    • 0.13% fail on Transmission (81% better than other 2012 cars)
      • 0.13% fail on Prop shafts
        • 0.065% fail on Prop shaft
        • 0.065% fail on Flexible couplings
    • 0.13% fail on Engine mounting (8 times worse than other 2012 cars)
      • 0.13% fail on Engine mounting condition (12 times worse than other 2012 cars)
    • 0.065% fail on Integral vehicle structure
      • 0.065% fail on Integral vehicle structure condition
    • 0.065% fail on Body
      • 0.065% fail on Panel
    • 0.065% fail on Boot lid
      • 0.065% fail on Boot lid condition
  • 1.0% fail on Road Wheels (2 times worse than other 2012 cars)
    • 0.97% fail on Attachment (3 times worse than other 2012 cars)
    • 0.065% fail on Condition
  • 0.90% fail on Seat belts and supplementary restraint systems
    • 0.65% fail on Seat belts (180% worse than other 2012 cars)
      • 0.58% fail on Condition (170% worse than other 2012 cars)
      • 0.065% fail on Prescribed areas
    • 0.19% fail on SRS malfunction indicator lamp
    • 0.065% fail on Airbags
      • 0.065% fail on Drivers airbag
  • 0.71% fail on Identification of the vehicle
    • 0.71% fail on Registration plates
  • 0.065% fail on Speedometer and speed limiter
    • 0.065% fail on Speedometer

Search Good Garages