Lexus RX MOT Results
Registered in 200061.2% pass rate
from 67 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2000 cars and highlighted areas where the Lexus RX is unusually good or bad.
-
15% fail on
Brakes
-
10% fail on
Brake performance
-
7.5% fail on
Parking brake efficiency (sp)
- 3.0% fail on Rbt (sp)
- 3.0% fail on Decelerometer (sp) (17 times worse than other 2000 cars)
- 1.5% fail on Gradient tester (sp)
-
6.0% fail on
Service brake performance
-
6.0% fail on
Rbt
- 6.0% fail on Service brake performance
-
6.0% fail on
Rbt
-
7.5% fail on
Parking brake efficiency (sp)
-
3.0% fail on
Mechanical brake components
-
3.0% fail on
Brake linings and pads
- 3.0% fail on Brake pads
-
1.5% fail on
Brake discs and drums
- 1.5% fail on Brake discs
-
3.0% fail on
Brake linings and pads
-
3.0% fail on
ABS / EBS / ESC
- 1.5% fail on Anti-lock braking system
- 1.5% fail on Electronic stability control
-
1.5% fail on
Service brake pedal or hand lever
- 1.5% fail on Hand lever
- 1.5% fail on Rigid brake pipes
-
10% fail on
Brake performance
-
12% fail on
Noise, emissions and leaks
-
10% fail on
Exhaust emissions
-
10% fail on
Spark ignition
- 7.5% fail on Catalyst emissions
- 4.5% fail on Malfunction indicator lamp
- 1.5% fail on Emissions not tested
-
10% fail on
Spark ignition
-
1.5% fail on
Fluid leaks
- 1.5% fail on Engine oil leaks
-
10% fail on
Exhaust emissions
-
9.0% fail on
Visibility
- 4.5% fail on Washers
- 3.0% fail on Wipers
- 1.5% fail on Bonnet
-
1.5% fail on
View to rear
- 1.5% fail on Mirrors
-
9.0% fail on
Lamps, reflectors and electrical equipment
- 4.5% fail on Stop lamp
-
1.5% fail on
Headlamps
- 1.5% fail on Headlamp
-
1.5% fail on
Headlamp aim
- 1.5% fail on Headlamp aim
-
1.5% fail on
Front and rear fog lamps
-
1.5% fail on
Rear fog lamp
- 1.5% fail on Rear fog lamp
-
1.5% fail on
Rear fog lamp
- 1.5% fail on Registration plate lamp(s)
-
9.0% fail on
Suspension
- 7.5% fail on Component mounting prescribed areas
-
4.5% fail on
Anti-roll bars
- 3.0% fail on Linkage ball joints
- 1.5% fail on Linkage ball joint dust cover
-
6.0% fail on
Body, chassis, structure
- 4.5% fail on Exhaust system
-
1.5% fail on
Fuel system
- 1.5% fail on Fuel cap/sealing device
-
6.0% fail on
Tyres
- 3.0% fail on Condition
- 3.0% fail on Tread depth