Land Rover Range Rover MOT Results

Registered in 1991

73.7% pass rate

from 209 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1991 cars and highlighted areas where the Land Rover Range Rover is unusually good or bad.

12% fail on Lamps, reflectors and electrical equipment
- 4.8% fail on Headlamp aim
  - 4.8% fail on Headlamp aim
- 3.3% fail on Stop lamp
- 1.9% fail on Headlamps
  - 1.9% fail on Headlamp
- 1.9% fail on Direction indicators
  - 1.9% fail on Flashing type
    - 1.4% fail on Side repeaters
    - 0.48% fail on Individual direction indicators
- 0.96% fail on Electrical equipment
  - 0.48% fail on Trailer electrical socket
  - 0.48% fail on Battery(ies)
- 0.48% fail on Position lamps
  - 0.48% fail on Switch
- 0.48% fail on Front and rear fog lamps
  - 0.48% fail on Rear fog lamp
    - 0.48% fail on Rear fog lamp
- 0.48% fail on Mandatory tell-tales
  - 0.48% fail on Main beam tell-tale
  - 0.48% fail on Rear fog lamp tell-tale
8.1% fail on Body, chassis, structure
- 3.8% fail on Exhaust system
- 1.9% fail on Integral vehicle structure
  - 1.9% fail on Integral vehicle structure condition
- 1.4% fail on Chassis
  - 1.4% fail on Chassis condition
- 0.48% fail on Fuel system
  - 0.48% fail on Fuel cap/sealing device
- 0.48% fail on Bumpers
- 0.48% fail on Transmission
  - 0.48% fail on Prop shafts
    - 0.48% fail on Prop shaft
- 0.48% fail on Body
  - 0.48% fail on Mounting fixings
- 0.48% fail on Seats
  - 0.48% fail on Passenger's seat
6.2% fail on Suspension
- 1.4% fail on Suspension arms
  - 0.96% fail on Pins and bushes
  - 0.48% fail on Ball joint
- 1.4% fail on Component mounting prescribed areas
- 0.96% fail on Axles
  - 0.48% fail on Axle
  - 0.48% fail on Swivel pins and bushes
- 0.96% fail on Wheel bearings
- 0.96% fail on Anti-roll bars
  - 0.48% fail on Ball joint dust cover
  - 0.48% fail on Linkage ball joint dust cover
- 0.48% fail on Springs
  - 0.48% fail on Spring mounting prescribed areas
- 0.48% fail on Shock absorbers
- 0.48% fail on Other suspension component
  - 0.48% fail on Attachment bracket and mounting
5.7% fail on Visibility
- 3.8% fail on Washers
- 1.9% fail on Wipers
4.3% fail on Brakes (61% better than other 1991 cars)
- 2.4% fail on Rigid brake pipes
- 0.96% fail on Brake performance (88% better than other 1991 cars)
  - 0.48% fail on Service brake performance
    - 0.48% fail on Rbt
      - 0.48% fail on Service brake performance
  - 0.48% fail on Parking brake efficiency (sp)
    - 0.48% fail on Decelerometer (sp)
- 0.48% fail on Air and vacuum systems
  - 0.48% fail on Pressure/vacuum build up
- 0.48% fail on Parking brake control
  - 0.48% fail on Lever
- 0.48% fail on Flexible brake hoses
- 0.48% fail on Other components and prescribed areas
  - 0.48% fail on Prescribed areas
    - 0.48% fail on Master cylinder/servo mounting
3.8% fail on Seat belts and supplementary restraint systems
- 3.8% fail on Seat belts
  - 1.9% fail on Prescribed areas
  - 1.9% fail on Condition
3.3% fail on Noise, emissions and leaks
- 2.9% fail on Exhaust emissions
  - 2.9% fail on Spark ignition
    - 2.4% fail on Non catalyst emissions
    - 0.48% fail on Catalyst emissions
- 0.48% fail on Fluid leaks
  - 0.48% fail on Hydraulic fluid leaks
1.9% fail on Steering
- 1.9% fail on Steering linkage components
  - 1.4% fail on Track rod end
  - 0.48% fail on Drag link end
0.48% fail on Identification of the vehicle
- 0.48% fail on Vehicle Identification Number
0.48% fail on Tyres
- 0.48% fail on Tread depth