Land Rover Range Rover MOT Results

Registered in 1989

75.2% pass rate

from 161 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1989 cars and highlighted areas where the Land Rover Range Rover is unusually good or bad.

11% fail on Lamps, reflectors and electrical equipment
- 5.0% fail on Direction indicators
  - 5.0% fail on Flashing type
    - 1.9% fail on All direction indicators
    - 1.9% fail on Individual direction indicators
    - 1.9% fail on Side repeaters
- 4.3% fail on Stop lamp
- 3.7% fail on Headlamp aim
  - 3.7% fail on Headlamp aim
- 1.2% fail on Front and rear fog lamps
  - 1.2% fail on Rear fog lamp
    - 1.2% fail on Rear fog lamp
- 0.62% fail on Registration plate lamp(s)
- 0.62% fail on Mandatory tell-tales
  - 0.62% fail on Rear fog lamp tell-tale
- 0.62% fail on Electrical equipment
  - 0.62% fail on Battery(ies)
8.7% fail on Visibility
- 6.2% fail on Wipers
- 3.1% fail on Washers
8.7% fail on Body, chassis, structure
- 5.6% fail on Integral vehicle structure (2 times worse than other 1989 cars)
  - 5.6% fail on Integral vehicle structure condition (3 times worse than other 1989 cars)
- 1.9% fail on Exhaust system
- 0.62% fail on Chassis
  - 0.62% fail on Chassis condition
- 0.62% fail on Doors
  - 0.62% fail on Front passenger's door
    - 0.62% fail on Door condition
- 0.62% fail on Floor
6.8% fail on Brakes
- 3.1% fail on Brake performance
  - 1.9% fail on Service Brake Efficiency (sp)
    - 1.2% fail on Rbt (sp)
      - 1.2% fail on Service brake performance
    - 0.62% fail on Decelerometer (sp)
  - 0.62% fail on Service brake performance
    - 0.62% fail on Rbt
      - 0.62% fail on Service brake performance
      - 0.62% fail on Service brake imbalance
  - 0.62% fail on Brake performance not tested
  - 0.62% fail on Parking brake efficiency (sp)
    - 0.62% fail on Rbt (sp)
- 2.5% fail on Rigid brake pipes
- 1.9% fail on Other components and prescribed areas (7 times worse than other 1989 cars)
  - 1.9% fail on Prescribed areas (9 times worse than other 1989 cars)
    - 1.2% fail on Master cylinder/servo mounting (9 times worse than other 1989 cars)
    - 0.62% fail on Other braking system component
- 1.9% fail on Mechanical brake components
  - 1.2% fail on Brake linings and pads
    - 1.2% fail on Brake pads
  - 0.62% fail on Brake discs and drums
    - 0.62% fail on Brake discs
5.6% fail on Suspension
- 1.9% fail on Wheel bearings
- 1.9% fail on Springs
  - 1.2% fail on Spring mounting prescribed areas (6 times worse than other 1989 cars)
  - 0.62% fail on Coil springs
    - 0.62% fail on Coil spring
- 1.2% fail on Anti-roll bars
  - 0.62% fail on Attachment bracket and mounting
  - 0.62% fail on Linkage attachment bracket and mounting
- 0.62% fail on Shock absorbers
- 0.62% fail on Suspension rods
  - 0.62% fail on Suspension rod
- 0.62% fail on Other suspension component
  - 0.62% fail on Ball joint dust cover
- 0.62% fail on Component mounting prescribed areas
5.6% fail on Seat belts and supplementary restraint systems (2 times worse than other 1989 cars)
- 5.6% fail on Seat belts (2 times worse than other 1989 cars)
  - 5.0% fail on Prescribed areas (3 times worse than other 1989 cars)
  - 1.9% fail on Condition
3.7% fail on Steering
- 1.9% fail on Steering gear
  - 1.9% fail on Steering box (13 times worse than other 1989 cars)
- 1.9% fail on Steering linkage components
  - 1.2% fail on Ball joint
  - 0.62% fail on Drag link end
  - 0.62% fail on Track rod end
- 0.62% fail on Power steering
  - 0.62% fail on Other components
3.1% fail on Noise, emissions and leaks
- 2.5% fail on Exhaust emissions
  - 2.5% fail on Spark ignition
    - 2.5% fail on Non catalyst emissions
- 0.62% fail on Fluid leaks
  - 0.62% fail on Transmission oil leaks