Land Rover Range Rover MOT Results
Registered in 198771.3% pass rate
from 87 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1987 cars and highlighted areas where the Land Rover Range Rover is unusually good or bad.
-
10% fail on
Lamps, reflectors and electrical equipment
-
5.7% fail on
Headlamp aim
- 5.7% fail on Headlamp aim
-
2.3% fail on
Electrical equipment
- 1.1% fail on Battery(ies)
- 1.1% fail on Horn
- 1.1% fail on Stop lamp
-
1.1% fail on
Direction indicators
-
1.1% fail on
Flashing type
- 1.1% fail on Side repeaters
-
1.1% fail on
Flashing type
- 1.1% fail on Registration plate lamp(s)
-
1.1% fail on
Mandatory tell-tales
- 1.1% fail on Main beam tell-tale
-
5.7% fail on
Headlamp aim
-
10% fail on
Body, chassis, structure
-
3.4% fail on
Integral vehicle structure
- 3.4% fail on Integral vehicle structure condition
- 2.3% fail on Exhaust system
-
1.1% fail on
Chassis
- 1.1% fail on Chassis condition
-
1.1% fail on
Transmission
-
1.1% fail on
Drive shafts
- 1.1% fail on Drive shaft
-
1.1% fail on
Drive shafts
-
1.1% fail on
Seats
- 1.1% fail on Passenger's seat
-
1.1% fail on
Cabs
- 1.1% fail on Prescribed areas
-
3.4% fail on
Integral vehicle structure
-
8.0% fail on
Seat belts and supplementary restraint systems
(2 times worse than other 1987 cars)
-
8.0% fail on
Seat belts
(2 times worse than other 1987 cars)
- 4.6% fail on Prescribed areas
- 4.6% fail on Condition (6 times worse than other 1987 cars)
-
8.0% fail on
Seat belts
(2 times worse than other 1987 cars)
-
6.9% fail on
Brakes
-
3.4% fail on
Mechanical brake components
-
2.3% fail on
Brake linings and pads
(5 times worse than other 1987 cars)
- 2.3% fail on Brake pads (6 times worse than other 1987 cars)
-
1.1% fail on
Brake discs and drums
- 1.1% fail on Brake discs
-
2.3% fail on
Brake linings and pads
(5 times worse than other 1987 cars)
-
3.4% fail on
Brake performance
-
1.1% fail on
Service brake performance
-
1.1% fail on
Rbt
- 1.1% fail on Service brake imbalance
-
1.1% fail on
Rbt
- 1.1% fail on Brake performance not tested
-
1.1% fail on
Service Brake Efficiency (sp)
- 1.1% fail on Decelerometer (sp)
-
1.1% fail on
Service brake performance
- 1.1% fail on Flexible brake hoses
-
3.4% fail on
Mechanical brake components
-
6.9% fail on
Visibility
- 6.9% fail on Washers
-
5.7% fail on
Suspension
- 2.3% fail on Component mounting prescribed areas
- 1.1% fail on Wheel bearings
-
1.1% fail on
Suspension arms
- 1.1% fail on Ball joint dust cover
-
1.1% fail on
Other suspension component
- 1.1% fail on Ball joint dust cover
-
2.3% fail on
Steering
-
2.3% fail on
Steering linkage components
- 1.1% fail on Drag link end
- 1.1% fail on Track rod end
-
2.3% fail on
Steering linkage components
-
2.3% fail on
Tyres
- 1.1% fail on Condition
- 1.1% fail on Tread depth
-
1.1% fail on
Road Wheels
- 1.1% fail on Attachment