Land Rover Range Rover MOT Results
Registered in 198477.4% pass rate
from 53 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1984 cars and highlighted areas where the Land Rover Range Rover is unusually good or bad.
-
7.5% fail on
Visibility
- 5.7% fail on Washers
- 1.9% fail on Wipers
-
7.5% fail on
Lamps, reflectors and electrical equipment
- 3.8% fail on Stop lamp
-
3.8% fail on
Direction indicators
-
3.8% fail on
Flashing type
- 3.8% fail on All direction indicators
-
3.8% fail on
Flashing type
-
3.8% fail on
Front and rear fog lamps
-
3.8% fail on
Rear fog lamp
- 3.8% fail on Rear fog lamp
-
3.8% fail on
Rear fog lamp
-
1.9% fail on
Headlamps
- 1.9% fail on Headlamp
-
1.9% fail on
Headlamp aim
- 1.9% fail on Headlamp aim
-
7.5% fail on
Body, chassis, structure
-
3.8% fail on
Integral vehicle structure
- 3.8% fail on Integral vehicle structure condition
-
3.8% fail on
Body
(18 times worse than other 1984 cars)
- 1.9% fail on Body condition
- 1.9% fail on Mounting fixings
-
1.9% fail on
Chassis
- 1.9% fail on Chassis condition
- 1.9% fail on Exhaust system
-
1.9% fail on
Doors
-
1.9% fail on
Front passenger's door
- 1.9% fail on Door condition
-
1.9% fail on
Front passenger's door
- 1.9% fail on Floor
-
3.8% fail on
Integral vehicle structure
-
7.5% fail on
Noise, emissions and leaks
-
7.5% fail on
Exhaust emissions
-
7.5% fail on
Spark ignition
- 5.7% fail on Non catalyst emissions
- 1.9% fail on Emissions not tested
-
7.5% fail on
Spark ignition
-
7.5% fail on
Exhaust emissions
-
5.7% fail on
Brakes
- 1.9% fail on Rigid brake pipes
- 1.9% fail on Flexible brake hoses
-
1.9% fail on
Brake performance
-
1.9% fail on
Service Brake Efficiency (sp)
-
1.9% fail on
Rbt (sp)
- 1.9% fail on Service brake imbalance
-
1.9% fail on
Rbt (sp)
-
1.9% fail on
Service Brake Efficiency (sp)
-
5.7% fail on
Steering
-
3.8% fail on
Steering linkage components
- 1.9% fail on Ball joint
- 1.9% fail on Drag link end
- 1.9% fail on Track rod end
-
1.9% fail on
Steering gear
- 1.9% fail on Steering box
-
3.8% fail on
Steering linkage components
-
5.7% fail on
Suspension
-
1.9% fail on
Suspension arms
- 1.9% fail on Suspension arm
-
1.9% fail on
Suspension rods
- 1.9% fail on Suspension rod
-
1.9% fail on
Other suspension component
- 1.9% fail on Ball joint
- 1.9% fail on Component mounting prescribed areas
-
1.9% fail on
Suspension arms
-
1.9% fail on
Identification of the vehicle
- 1.9% fail on Registration plates
-
1.9% fail on
Seat belts and supplementary restraint systems
-
1.9% fail on
Seat belts
- 1.9% fail on Prescribed areas
-
1.9% fail on
Seat belts
-
1.9% fail on
Road Wheels
- 1.9% fail on Hubs
-
1.9% fail on
Tyres
- 1.9% fail on Tread depth