Land Rover Freelander MOT Results
Registered in 199857.5% pass rate
from 438 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1998 cars and highlighted areas where the Land Rover Freelander is unusually good or bad.
-
21% fail on
Brakes
(73% worse than other 1998 cars)
-
13% fail on
Brake performance
(78% worse than other 1998 cars)
-
7.5% fail on
Parking brake efficiency (sp)
(130% worse than other 1998 cars)
- 5.5% fail on Rbt (sp) (75% worse than other 1998 cars)
- 2.1% fail on Decelerometer (sp) (14 times worse than other 1998 cars)
-
5.0% fail on
Service Brake Efficiency (sp)
(78% worse than other 1998 cars)
-
4.8% fail on
Rbt (sp)
- 3.7% fail on Service brake performance (180% worse than other 1998 cars)
- 2.5% fail on Service brake imbalance
- 0.23% fail on Decelerometer (sp)
-
4.8% fail on
Rbt (sp)
-
4.6% fail on
Service brake performance
-
4.6% fail on
Rbt
- 4.6% fail on Service brake performance (100% worse than other 1998 cars)
- 0.46% fail on Service brake imbalance
-
4.6% fail on
Rbt
-
2.3% fail on
Parking brake performance
-
2.3% fail on
Rbt
- 1.8% fail on Parking brake performance
- 0.46% fail on Parking (secondary brake performance)
-
2.3% fail on
Rbt
- 0.23% fail on Brake performance not tested
-
7.5% fail on
Parking brake efficiency (sp)
(130% worse than other 1998 cars)
-
6.2% fail on
ABS / EBS / ESC
(3 times worse than other 1998 cars)
- 5.9% fail on Anti-lock braking system (3 times worse than other 1998 cars)
- 1.1% fail on Electronic stability control (5 times worse than other 1998 cars)
- 5.0% fail on Rigid brake pipes (97% worse than other 1998 cars)
-
1.8% fail on
Service brake pedal or hand lever
(3 times worse than other 1998 cars)
- 1.6% fail on Pedal (6 times worse than other 1998 cars)
- 0.23% fail on Hand lever
-
1.8% fail on
Mechanical brake components
-
1.6% fail on
Brake discs and drums
- 1.6% fail on Brake discs
-
0.68% fail on
Brake linings and pads
- 0.68% fail on Brake pads
-
1.6% fail on
Brake discs and drums
- 0.68% fail on Flexible brake hoses
-
0.46% fail on
Hydraulic systems
- 0.46% fail on Servos (31 times worse than other 1998 cars)
-
0.23% fail on
Air and vacuum systems
- 0.23% fail on Servos
-
0.23% fail on
Parking brake control
- 0.23% fail on Lever
-
0.23% fail on
Other components and prescribed areas
-
0.23% fail on
Prescribed areas
- 0.23% fail on Other braking system component
-
0.23% fail on
Prescribed areas
-
13% fail on
Brake performance
(78% worse than other 1998 cars)
-
17% fail on
Suspension
-
7.5% fail on
Anti-roll bars
(200% worse than other 1998 cars)
- 4.1% fail on Linkage ball joints (4 times worse than other 1998 cars)
- 2.1% fail on Linkage ball joint dust cover (3 times worse than other 1998 cars)
- 0.68% fail on Attachment bracket and mounting (5 times worse than other 1998 cars)
- 0.68% fail on Pins and bushes
- 0.46% fail on Ball joint
- 0.23% fail on Anti-roll bar
- 0.23% fail on Linkage pins and bushes
- 6.4% fail on Component mounting prescribed areas
-
5.9% fail on
Suspension arms
- 1.8% fail on Pins and bushes
- 1.6% fail on Ball joint
- 1.6% fail on Ball joint dust cover
- 0.91% fail on Suspension arm
-
1.4% fail on
Sub-frames
- 0.91% fail on Sub-frame (4 times worse than other 1998 cars)
- 0.46% fail on Sub-frame mounting prescribed areas
-
0.23% fail on
Axles
- 0.23% fail on Axle
- 0.23% fail on Wheel bearings
-
0.23% fail on
Other suspension component
- 0.23% fail on Ball joint
-
7.5% fail on
Anti-roll bars
(200% worse than other 1998 cars)
-
15% fail on
Lamps, reflectors and electrical equipment
- 5.0% fail on Stop lamp
- 5.0% fail on Registration plate lamp(s) (2 times worse than other 1998 cars)
-
2.3% fail on
Headlamp aim
- 2.3% fail on Headlamp aim
-
1.4% fail on
Headlamps
- 1.4% fail on Headlamp
-
1.4% fail on
Direction indicators
-
1.4% fail on
Flashing type
- 1.4% fail on Individual direction indicators
-
1.4% fail on
Flashing type
-
1.4% fail on
Electrical equipment
- 0.91% fail on Battery(ies)
- 0.46% fail on Horn
-
0.46% fail on
Front and rear fog lamps
-
0.46% fail on
Rear fog lamp
- 0.46% fail on Rear fog lamp
-
0.46% fail on
Rear fog lamp
-
0.23% fail on
Position lamps
- 0.23% fail on Position lamp
-
11% fail on
Body, chassis, structure
- 5.3% fail on Exhaust system (75% worse than other 1998 cars)
-
3.0% fail on
Transmission
-
2.3% fail on
Drive shafts
- 2.3% fail on Joints
-
0.68% fail on
Prop shafts
- 0.46% fail on Prop shaft (11 times worse than other 1998 cars)
- 0.23% fail on Bearing housing
-
2.3% fail on
Drive shafts
-
2.1% fail on
Integral vehicle structure
- 2.1% fail on Integral vehicle structure condition
-
0.91% fail on
Chassis
- 0.91% fail on Chassis condition
-
0.68% fail on
Body
- 0.68% fail on Other body component (4 times worse than other 1998 cars)
-
0.46% fail on
Fuel system
- 0.23% fail on Tank
- 0.23% fail on Pipe
-
0.46% fail on
Doors
-
0.46% fail on
Other passenger's door
- 0.46% fail on Door condition
-
0.46% fail on
Other passenger's door
-
0.23% fail on
Load security
- 0.23% fail on Loading door
-
11% fail on
Noise, emissions and leaks
-
11% fail on
Exhaust emissions
-
8.9% fail on
Spark ignition
- 7.5% fail on Catalyst emissions
- 1.6% fail on Emissions not tested
-
1.6% fail on
Compression ignition
(170% worse than other 1998 cars)
- 1.1% fail on Pre 01/07/2008 Turbo (3 times worse than other 1998 cars)
- 0.46% fail on Emissions not tested
-
8.9% fail on
Spark ignition
-
0.46% fail on
Fluid leaks
- 0.46% fail on Engine oil leaks
-
11% fail on
Exhaust emissions
-
4.6% fail on
Visibility
- 3.4% fail on Wipers
- 0.46% fail on Washers (85% better than other 1998 cars)
- 0.23% fail on Bonnet
-
0.23% fail on
Condition of glass
- 0.23% fail on Windscreen
-
0.23% fail on
View to rear
- 0.23% fail on Mirrors
-
3.9% fail on
Steering
-
3.2% fail on
Steering linkage components
- 3.2% fail on Track rod end (120% worse than other 1998 cars)
-
0.91% fail on
Power steering
- 0.68% fail on Other components (3 times worse than other 1998 cars)
- 0.23% fail on Pipes and hoses
-
3.2% fail on
Steering linkage components
-
3.9% fail on
Tyres
- 3.0% fail on Tread depth
- 1.1% fail on Condition
-
2.5% fail on
Seat belts and supplementary restraint systems
-
1.6% fail on
Seat belts
- 1.4% fail on Prescribed areas
- 0.23% fail on Condition
- 0.91% fail on SRS malfunction indicator lamp
-
1.6% fail on
Seat belts
-
0.23% fail on
Identification of the vehicle
- 0.23% fail on Registration plates
-
0.23% fail on
Road Wheels
- 0.23% fail on Attachment