Jaguar XJ MOT Results
Registered in 199076.1% pass rate
from 142 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1990 cars and highlighted areas where the Jaguar XJ is unusually good or bad.
-
8.5% fail on
Lamps, reflectors and electrical equipment
-
3.5% fail on
Headlamp aim
- 3.5% fail on Headlamp aim
-
2.8% fail on
Direction indicators
-
2.8% fail on
Flashing type
- 2.1% fail on Side repeaters
- 0.70% fail on Individual direction indicators
-
2.8% fail on
Flashing type
-
1.4% fail on
Headlamps
- 1.4% fail on Headlamp
-
1.4% fail on
Electrical equipment
- 1.4% fail on Horn
-
0.70% fail on
Position lamps
- 0.70% fail on Switch
-
0.70% fail on
Front and rear fog lamps
-
0.70% fail on
Rear fog lamp
- 0.70% fail on Rear fog lamp
-
0.70% fail on
Rear fog lamp
-
3.5% fail on
Headlamp aim
-
7.7% fail on
Brakes
-
4.2% fail on
ABS / EBS / ESC
(13 times worse than other 1990 cars)
- 4.2% fail on Anti-lock braking system (14 times worse than other 1990 cars)
-
3.5% fail on
Brake performance
-
2.1% fail on
Service brake performance
-
2.1% fail on
Rbt
- 2.1% fail on Service brake performance
-
2.1% fail on
Rbt
-
1.4% fail on
Parking brake efficiency (sp)
- 1.4% fail on Rbt (sp)
-
0.70% fail on
Service Brake Efficiency (sp)
-
0.70% fail on
Rbt (sp)
- 0.70% fail on Service brake performance
- 0.70% fail on Service brake imbalance
-
0.70% fail on
Rbt (sp)
-
0.70% fail on
Parking brake performance
-
0.70% fail on
Rbt
- 0.70% fail on Parking brake performance
-
0.70% fail on
Rbt
-
2.1% fail on
Service brake performance
- 0.70% fail on Rigid brake pipes
-
4.2% fail on
ABS / EBS / ESC
(13 times worse than other 1990 cars)
-
7.0% fail on
Suspension
- 2.1% fail on Shock absorbers
-
2.1% fail on
Suspension arms
- 0.70% fail on Pins and bushes
- 0.70% fail on Ball joint
- 0.70% fail on Ball joint dust cover
- 2.1% fail on Component mounting prescribed areas
- 1.4% fail on Wheel bearings
-
1.4% fail on
Sub-frames
- 0.70% fail on Pins and bushes
- 0.70% fail on Sub-frame mounting prescribed areas
-
5.6% fail on
Visibility
- 2.8% fail on Wipers
- 2.8% fail on Washers
-
4.9% fail on
Body, chassis, structure
-
2.1% fail on
Integral vehicle structure
- 2.1% fail on Integral vehicle structure condition
-
1.4% fail on
Doors
-
1.4% fail on
Other passenger's door
- 1.4% fail on Door condition
-
1.4% fail on
Other passenger's door
- 0.70% fail on Exhaust system
-
0.70% fail on
Fuel system
- 0.70% fail on Fuel cap/sealing device
- 0.70% fail on Bumpers
-
2.1% fail on
Integral vehicle structure
-
2.8% fail on
Noise, emissions and leaks
-
2.8% fail on
Exhaust emissions
-
2.8% fail on
Spark ignition
- 2.1% fail on Non catalyst emissions
- 1.4% fail on Emissions not tested
-
2.8% fail on
Spark ignition
-
2.8% fail on
Exhaust emissions
-
1.4% fail on
Tyres
- 1.4% fail on Condition
- 1.4% fail on Tread depth
-
0.70% fail on
Steering
-
0.70% fail on
Steering linkage components
- 0.70% fail on Drag link end
-
0.70% fail on
Steering linkage components
-
0.70% fail on
Seat belts and supplementary restraint systems
-
0.70% fail on
Seat belts
- 0.70% fail on Prescribed areas
-
0.70% fail on
Seat belts