Isuzu Trooper MOT Results
Registered in 199655.1% pass rate
from 158 tests in 2021
(30% worse than other 1996 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1996 cars and highlighted areas where the Isuzu Trooper is unusually good or bad.
-
20% fail on
Lamps, reflectors and electrical equipment
- 5.1% fail on Stop lamp
-
4.4% fail on
Headlamps
- 4.4% fail on Headlamp
-
3.8% fail on
Headlamp aim
- 3.8% fail on Headlamp aim
-
3.8% fail on
Front and rear fog lamps
-
3.8% fail on
Rear fog lamp
- 3.8% fail on Rear fog lamp
-
3.8% fail on
Rear fog lamp
-
3.2% fail on
Direction indicators
-
3.2% fail on
Flashing type
- 2.5% fail on Individual direction indicators
- 0.63% fail on Side repeaters
-
3.2% fail on
Flashing type
- 2.5% fail on Registration plate lamp(s)
-
1.9% fail on
Electrical equipment
- 1.3% fail on Electrical wiring (9 times worse than other 1996 cars)
- 0.63% fail on Battery(ies)
-
1.3% fail on
Position lamps
(6 times worse than other 1996 cars)
- 1.3% fail on Position lamp (7 times worse than other 1996 cars)
- 0.63% fail on Rear reflectors
-
18% fail on
Suspension
- 7.0% fail on Component mounting prescribed areas
-
4.4% fail on
Anti-roll bars
- 2.5% fail on Linkage ball joints (4 times worse than other 1996 cars)
- 1.3% fail on Ball joint (6 times worse than other 1996 cars)
- 0.63% fail on Attachment bracket and mounting
- 0.63% fail on Pins and bushes
-
3.8% fail on
Suspension arms
- 3.2% fail on Ball joint
- 1.3% fail on Ball joint dust cover
-
3.2% fail on
Springs
-
3.2% fail on
Coil springs
- 2.5% fail on Coil spring
- 0.63% fail on Mounting
-
3.2% fail on
Coil springs
- 1.9% fail on Shock absorbers
-
1.9% fail on
Other suspension component
- 1.3% fail on Ball joint dust cover (6 times worse than other 1996 cars)
- 0.63% fail on Ball joint
- 1.3% fail on Wheel bearings
-
0.63% fail on
Sub-frames
- 0.63% fail on Sub-frame
-
18% fail on
Body, chassis, structure
(84% worse than other 1996 cars)
-
8.2% fail on
Transmission
(2 times worse than other 1996 cars)
-
7.0% fail on
Drive shafts
(2 times worse than other 1996 cars)
- 7.0% fail on Joints (2 times worse than other 1996 cars)
-
1.3% fail on
Prop shafts
- 1.3% fail on Joints
- 0.63% fail on Flexible couplings
-
7.0% fail on
Drive shafts
(2 times worse than other 1996 cars)
- 6.3% fail on Exhaust system
-
5.1% fail on
Chassis
(2 times worse than other 1996 cars)
- 5.1% fail on Chassis condition (2 times worse than other 1996 cars)
-
4.4% fail on
Integral vehicle structure
- 4.4% fail on Integral vehicle structure condition
- 2.5% fail on Bumpers (11 times worse than other 1996 cars)
-
1.3% fail on
Fuel system
- 1.3% fail on Tank (6 times worse than other 1996 cars)
-
1.3% fail on
Body
- 0.63% fail on Mounting fixings
- 0.63% fail on Panel
-
0.63% fail on
Towbar
- 0.63% fail on Other towbar components
-
8.2% fail on
Transmission
(2 times worse than other 1996 cars)
-
17% fail on
Brakes
-
11% fail on
Brake performance
-
5.7% fail on
Service brake performance
-
5.7% fail on
Rbt
- 5.1% fail on Service brake performance
- 2.5% fail on Service brake imbalance (3 times worse than other 1996 cars)
-
5.7% fail on
Rbt
-
4.4% fail on
Service Brake Efficiency (sp)
-
4.4% fail on
Rbt (sp)
- 3.8% fail on Service brake performance
- 1.9% fail on Service brake imbalance
-
4.4% fail on
Rbt (sp)
-
3.8% fail on
Parking brake performance
(2 times worse than other 1996 cars)
-
3.8% fail on
Rbt
(2 times worse than other 1996 cars)
- 3.2% fail on Parking brake performance (2 times worse than other 1996 cars)
- 0.63% fail on Parking (secondary brake performance)
-
3.8% fail on
Rbt
(2 times worse than other 1996 cars)
-
3.8% fail on
Parking brake efficiency (sp)
- 3.8% fail on Rbt (sp)
- 0.63% fail on Brake performance not tested
-
5.7% fail on
Service brake performance
- 5.1% fail on Rigid brake pipes
-
2.5% fail on
Mechanical brake components
-
2.5% fail on
Brake linings and pads
- 2.5% fail on Brake pads
-
2.5% fail on
Brake linings and pads
- 1.3% fail on Load sensing valves (6 times worse than other 1996 cars)
-
0.63% fail on
Parking brake control
- 0.63% fail on Lever
-
0.63% fail on
Pressure storage reservoirs
- 0.63% fail on Air and vacuum systems
-
0.63% fail on
Other components and prescribed areas
-
0.63% fail on
Prescribed areas
- 0.63% fail on Other braking system component
-
0.63% fail on
Prescribed areas
-
0.63% fail on
ABS / EBS / ESC
- 0.63% fail on Anti-lock braking system
-
11% fail on
Brake performance
-
8.9% fail on
Visibility
- 5.1% fail on Washers
- 4.4% fail on Wipers
-
5.1% fail on
Seat belts and supplementary restraint systems
-
5.1% fail on
Seat belts
- 3.8% fail on Prescribed areas
- 1.3% fail on Condition
-
5.1% fail on
Seat belts
-
3.2% fail on
Noise, emissions and leaks
-
3.2% fail on
Exhaust emissions
-
1.9% fail on
Compression ignition
- 1.3% fail on Pre 01/07/2008 Turbo
- 0.63% fail on On or after 01/07/2008
- 0.63% fail on Emissions not tested
-
1.3% fail on
Spark ignition
(80% better than other 1996 cars)
- 0.63% fail on Catalyst emissions
- 0.63% fail on Malfunction indicator lamp
-
1.9% fail on
Compression ignition
-
3.2% fail on
Exhaust emissions
-
2.5% fail on
Tyres
- 2.5% fail on Tread depth
-
1.9% fail on
Identification of the vehicle
- 1.9% fail on Registration plates
-
1.9% fail on
Steering
-
1.3% fail on
Steering linkage components
- 0.63% fail on Drag link end
- 0.63% fail on Track rod end
-
0.63% fail on
Steering gear
- 0.63% fail on Steering box
- 0.63% fail on Steering wheel
-
1.3% fail on
Steering linkage components
-
1.3% fail on
Road Wheels
- 1.3% fail on Attachment