Hyundai Trajet MOT Results
Registered in 200653.3% pass rate
from 227 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2006 cars and highlighted areas where the Hyundai Trajet is unusually good or bad.
-
20% fail on
Lamps, reflectors and electrical equipment
-
10% fail on
Headlamps
(110% worse than other 2006 cars)
- 7.9% fail on Headlamp
- 3.1% fail on Headlamp levelling device (12 times worse than other 2006 cars)
-
7.0% fail on
Headlamp aim
(98% worse than other 2006 cars)
- 5.7% fail on Headlamp aim
- 1.3% fail on Headlamp aim not tested
- 6.6% fail on Stop lamp
- 2.6% fail on Registration plate lamp(s)
-
1.3% fail on
Direction indicators
-
1.3% fail on
Flashing type
- 0.88% fail on Side repeaters
- 0.44% fail on Individual direction indicators
-
1.3% fail on
Flashing type
-
0.88% fail on
Electrical equipment
- 0.88% fail on Battery(ies)
-
0.44% fail on
Front and rear fog lamps
-
0.44% fail on
Rear fog lamp
- 0.44% fail on Rear fog lamp
-
0.44% fail on
Rear fog lamp
-
10% fail on
Headlamps
(110% worse than other 2006 cars)
-
20% fail on
Suspension
-
8.8% fail on
Suspension arms
- 6.2% fail on Ball joint (190% worse than other 2006 cars)
- 1.3% fail on Pins and bushes
- 1.3% fail on Ball joint dust cover
- 0.44% fail on Suspension arm
- 4.8% fail on Component mounting prescribed areas (2 times worse than other 2006 cars)
-
4.0% fail on
Macpherson strut
(18 times worse than other 2006 cars)
- 1.8% fail on Macpherson strut (33 times worse than other 2006 cars)
- 1.3% fail on Attachment bracket and mounting (16 times worse than other 2006 cars)
- 0.88% fail on Pins and bushes (11 times worse than other 2006 cars)
-
4.0% fail on
Anti-roll bars
- 2.2% fail on Linkage ball joints
- 0.44% fail on Attachment bracket and mounting
- 0.44% fail on Ball joint
- 0.44% fail on Ball joint dust cover
- 0.44% fail on Linkage ball joint dust cover
- 1.8% fail on Shock absorbers
- 0.88% fail on Wheel bearings
-
0.88% fail on
Springs
(83% better than other 2006 cars)
- 0.88% fail on Spring mounting prescribed areas (24 times worse than other 2006 cars)
-
0.44% fail on
Other suspension component
- 0.44% fail on Ball joint
-
8.8% fail on
Suspension arms
-
15% fail on
Brakes
-
5.3% fail on
Brake performance
-
3.1% fail on
Service brake performance
-
3.1% fail on
Rbt
- 3.1% fail on Service brake performance
- 0.44% fail on Service brake imbalance
-
3.1% fail on
Rbt
-
2.2% fail on
Parking brake efficiency (sp)
- 2.2% fail on Rbt (sp)
-
0.44% fail on
Service Brake Efficiency (sp)
-
0.44% fail on
Rbt (sp)
- 0.44% fail on Service brake imbalance
-
0.44% fail on
Rbt (sp)
-
0.44% fail on
Parking brake performance
-
0.44% fail on
Rbt
- 0.44% fail on Parking brake performance
-
0.44% fail on
Rbt
-
3.1% fail on
Service brake performance
- 4.0% fail on Rigid brake pipes
-
3.1% fail on
Mechanical brake components
-
2.2% fail on
Brake linings and pads
- 2.2% fail on Brake pads
-
0.88% fail on
Brake discs and drums
- 0.88% fail on Brake discs
-
2.2% fail on
Brake linings and pads
-
3.1% fail on
ABS / EBS / ESC
- 3.1% fail on Anti-lock braking system (190% worse than other 2006 cars)
-
0.88% fail on
Parking brake control
- 0.88% fail on Lever
-
0.44% fail on
Service brake pedal or hand lever
- 0.44% fail on Pedal
-
0.44% fail on
Hydraulic systems
- 0.44% fail on Reservoirs
-
0.44% fail on
Other components and prescribed areas
- 0.44% fail on Other components
-
5.3% fail on
Brake performance
-
11% fail on
Visibility
- 7.0% fail on Washers (110% worse than other 2006 cars)
- 4.8% fail on Wipers
-
8.4% fail on
Tyres
- 4.8% fail on Condition
- 3.1% fail on Tread depth
- 0.44% fail on Size/type
-
5.3% fail on
Body, chassis, structure
-
1.3% fail on
Integral vehicle structure
- 1.3% fail on Integral vehicle structure condition
-
1.3% fail on
Chassis
(3 times worse than other 2006 cars)
- 1.3% fail on Chassis condition (3 times worse than other 2006 cars)
- 1.3% fail on Exhaust system
-
0.88% fail on
Transmission
-
0.88% fail on
Drive shafts
- 0.88% fail on Joints
-
0.88% fail on
Drive shafts
-
0.44% fail on
Fuel system
- 0.44% fail on Fuel cap/sealing device
- 0.44% fail on Bumpers
-
0.44% fail on
Body
- 0.44% fail on Other body component
-
1.3% fail on
Integral vehicle structure
-
4.4% fail on
Noise, emissions and leaks
-
4.0% fail on
Exhaust emissions
-
3.1% fail on
Compression ignition
- 2.6% fail on Pre 01/07/2008 Turbo (2 times worse than other 2006 cars)
- 0.44% fail on On or after 01/01/2014
-
0.88% fail on
Spark ignition
(81% better than other 2006 cars)
- 0.88% fail on Malfunction indicator lamp
- 0.44% fail on Catalyst emissions
- 0.44% fail on Emissions not tested
-
3.1% fail on
Compression ignition
-
0.44% fail on
Fluid leaks
- 0.44% fail on Engine oil leaks
-
4.0% fail on
Exhaust emissions
-
4.0% fail on
Steering
-
3.5% fail on
Steering linkage components
- 2.6% fail on Track rod end
- 0.44% fail on Drag link end
- 0.44% fail on Locking devices
-
0.44% fail on
Power steering
- 0.44% fail on Operation
-
3.5% fail on
Steering linkage components
-
3.1% fail on
Identification of the vehicle
(4 times worse than other 2006 cars)
- 3.1% fail on Registration plates (4 times worse than other 2006 cars)
-
3.1% fail on
Seat belts and supplementary restraint systems
-
2.2% fail on
Seat belts
- 0.88% fail on Prescribed areas
- 0.88% fail on Condition
- 0.44% fail on Requirements
- 0.88% fail on SRS malfunction indicator lamp
-
2.2% fail on
Seat belts