Hyundai i30 MOT Results
Registered in 201261.7% pass rate
from 9,368 tests in 2021
(31% worse than other 2012 cars)
Pass rate by mileage
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Hyundai i30 is unusually good or bad.
-
13% fail on
Brakes
(120% worse than other 2012 cars)
-
9.7% fail on
Brake performance
(2 times worse than other 2012 cars)
-
7.8% fail on
Parking brake efficiency (sp)
(6 times worse than other 2012 cars)
- 7.7% fail on Rbt (sp) (7 times worse than other 2012 cars)
- 0.053% fail on Decelerometer (sp)
- 0.043% fail on Plate brake tester (sp) (14 times worse than other 2012 cars)
-
3.8% fail on
Parking brake performance
(7 times worse than other 2012 cars)
-
3.7% fail on
Rbt
(7 times worse than other 2012 cars)
- 3.3% fail on Parking brake performance (7 times worse than other 2012 cars)
- 0.36% fail on Parking (secondary brake performance) (7 times worse than other 2012 cars)
- 0.064% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles) (4 times worse than other 2012 cars)
-
0.11% fail on
Plate brake tester
(7 times worse than other 2012 cars)
- 0.053% fail on Parking (secondary brake performance) (8 times worse than other 2012 cars)
- 0.032% fail on Parking brake performance (4 times worse than other 2012 cars)
- 0.021% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles) (16 times worse than other 2012 cars)
-
0.032% fail on
Decelerometer
(4 times worse than other 2012 cars)
- 0.032% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles) (10 times worse than other 2012 cars)
-
3.7% fail on
Rbt
(7 times worse than other 2012 cars)
-
1.8% fail on
Service brake performance
(32% worse than other 2012 cars)
-
1.8% fail on
Rbt
(30% worse than other 2012 cars)
- 1.4% fail on Service brake performance
- 0.46% fail on Service brake imbalance (71% worse than other 2012 cars)
-
0.043% fail on
Plate brake tester
- 0.032% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
- 0.011% fail on Service brake performance
-
0.011% fail on
Decelerometer
- 0.011% fail on Service brake performance
-
1.8% fail on
Rbt
(30% worse than other 2012 cars)
-
0.89% fail on
Service Brake Efficiency (sp)
(110% worse than other 2012 cars)
-
0.89% fail on
Rbt (sp)
(120% worse than other 2012 cars)
- 0.57% fail on Service brake performance (2 times worse than other 2012 cars)
- 0.36% fail on Service brake imbalance
-
0.89% fail on
Rbt (sp)
(120% worse than other 2012 cars)
- 0.043% fail on Brake performance not tested
-
7.8% fail on
Parking brake efficiency (sp)
(6 times worse than other 2012 cars)
-
3.6% fail on
Mechanical brake components
(30% worse than other 2012 cars)
-
2.4% fail on
Brake linings and pads
- 2.4% fail on Brake pads
- 0.011% fail on Brake linings
-
1.4% fail on
Brake discs and drums
(41% worse than other 2012 cars)
- 1.4% fail on Brake discs (40% worse than other 2012 cars)
- 0.011% fail on Brake drums
-
0.22% fail on
Brake cables, rods, levers and linkages
(2 times worse than other 2012 cars)
- 0.13% fail on Lever (6 times worse than other 2012 cars)
- 0.053% fail on Cable
- 0.011% fail on Linkage
- 0.011% fail on Relay lever
- 0.011% fail on Pivot
- 0.011% fail on Brake slack adjuster
-
2.4% fail on
Brake linings and pads
-
0.81% fail on
ABS / EBS / ESC
(140% worse than other 2012 cars)
- 0.74% fail on Electronic stability control (3 times worse than other 2012 cars)
- 0.064% fail on Anti-lock braking system (72% better than other 2012 cars)
- 0.021% fail on Electronic braking system
-
0.77% fail on
Parking brake control
(2 times worse than other 2012 cars)
- 0.77% fail on Lever (2 times worse than other 2012 cars)
-
0.43% fail on
Service brake pedal or hand lever
(100% worse than other 2012 cars)
- 0.37% fail on Hand lever (190% worse than other 2012 cars)
- 0.053% fail on Pedal
-
0.18% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
(120% worse than other 2012 cars)
- 0.16% fail on Hydraulic brake callipers (160% worse than other 2012 cars)
- 0.021% fail on Hydraulic brake cylinder
-
0.075% fail on
Hydraulic systems
- 0.064% fail on Brake fluid
- 0.011% fail on Reservoirs
- 0.064% fail on Flexible brake hoses
-
0.011% fail on
Other components and prescribed areas
- 0.011% fail on Other components
-
9.7% fail on
Brake performance
(2 times worse than other 2012 cars)
-
12% fail on
Steering
(7 times worse than other 2012 cars)
-
12% fail on
Steering linkage components
(7 times worse than other 2012 cars)
- 12% fail on Track rod end (8 times worse than other 2012 cars)
- 0.14% fail on Ball joint (180% worse than other 2012 cars)
- 0.011% fail on Drag link end
-
0.011% fail on
Other components
- 0.011% fail on Steering component
- 0.011% fail on Locking devices
-
0.67% fail on
Steering gear
(4 times worse than other 2012 cars)
- 0.67% fail on Steering rack (5 times worse than other 2012 cars)
-
0.053% fail on
Steering play
- 0.053% fail on Steering rack
-
0.011% fail on
Power steering
- 0.011% fail on Operation
-
12% fail on
Steering linkage components
(7 times worse than other 2012 cars)
-
11% fail on
Lamps, reflectors and electrical equipment
(25% worse than other 2012 cars)
- 3.8% fail on Stop lamp (89% worse than other 2012 cars)
-
3.7% fail on
Headlamps
(60% worse than other 2012 cars)
- 3.7% fail on Headlamp (68% worse than other 2012 cars)
- 0.096% fail on Headlamp levelling device
-
2.3% fail on
Direction indicators
(38% worse than other 2012 cars)
-
2.3% fail on
Flashing type
(38% worse than other 2012 cars)
- 1.3% fail on Side repeaters (94% worse than other 2012 cars)
- 1.2% fail on Individual direction indicators
- 0.064% fail on All direction indicators
-
2.3% fail on
Flashing type
(38% worse than other 2012 cars)
-
2.1% fail on
Headlamp aim
- 1.7% fail on Headlamp aim (25% better than other 2012 cars)
- 0.43% fail on Headlamp aim not tested (74% worse than other 2012 cars)
- 0.92% fail on Registration plate lamp(s) (33% better than other 2012 cars)
-
0.39% fail on
Electrical equipment
(77% worse than other 2012 cars)
- 0.26% fail on Horn (94% worse than other 2012 cars)
- 0.12% fail on Battery(ies)
- 0.011% fail on Trailer electrical socket
- 0.011% fail on Electrical wiring
-
0.35% fail on
Front and rear fog lamps
-
0.35% fail on
Rear fog lamp
- 0.35% fail on Rear fog lamp
-
0.35% fail on
Rear fog lamp
-
0.11% fail on
Reversing lamps
- 0.11% fail on Reversing lamps
-
0.096% fail on
Position lamps
- 0.096% fail on Position lamp
- 0.043% fail on Rear reflectors
-
0.011% fail on
Hazard warning
- 0.011% fail on Switch
-
8.0% fail on
Suspension
(14% better than other 2012 cars)
-
3.1% fail on
Springs
(28% better than other 2012 cars)
-
3.1% fail on
Coil springs
(28% better than other 2012 cars)
- 3.1% fail on Coil spring (28% better than other 2012 cars)
-
3.1% fail on
Coil springs
(28% better than other 2012 cars)
-
2.6% fail on
Anti-roll bars
(63% worse than other 2012 cars)
- 0.95% fail on Linkage ball joint dust cover (130% worse than other 2012 cars)
- 0.93% fail on Linkage ball joints (53% worse than other 2012 cars)
- 0.42% fail on Ball joint dust cover (130% worse than other 2012 cars)
- 0.31% fail on Ball joint (72% worse than other 2012 cars)
- 0.043% fail on Linkage pins and bushes
- 0.021% fail on Linkage (80% better than other 2012 cars)
-
2.5% fail on
Suspension arms
(19% better than other 2012 cars)
- 1.4% fail on Ball joint
- 0.62% fail on Pins and bushes (51% better than other 2012 cars)
- 0.49% fail on Ball joint dust cover
- 0.043% fail on Suspension arm
- 0.011% fail on Attachment bracket and mounting
- 0.23% fail on Wheel bearings
- 0.21% fail on Shock absorbers (60% better than other 2012 cars)
-
0.20% fail on
Other suspension component
- 0.13% fail on Ball joint
- 0.075% fail on Ball joint dust cover (2 times worse than other 2012 cars)
-
0.085% fail on
Sub-frames
- 0.043% fail on Sub-frame
- 0.011% fail on Attachment bracket and mounting
- 0.011% fail on Pins and bushes
- 0.011% fail on Sub-frame mounting prescribed areas
- 0.011% fail on Ball joint
-
0.064% fail on
Suspension rods
- 0.032% fail on Ball joint dust cover
- 0.021% fail on Pins and bushes
- 0.011% fail on Ball joint
-
0.021% fail on
Macpherson strut
- 0.011% fail on Attachment bracket and mounting
- 0.011% fail on Ball joint dust cover
-
0.011% fail on
Axles
- 0.011% fail on Swivel pins and bushes
-
3.1% fail on
Springs
(28% better than other 2012 cars)
-
6.1% fail on
Visibility
(38% worse than other 2012 cars)
- 3.2% fail on Washers (53% worse than other 2012 cars)
- 3.0% fail on Wipers (33% worse than other 2012 cars)
-
0.085% fail on
View to rear
- 0.085% fail on Mirrors
-
0.075% fail on
Condition of glass
- 0.075% fail on Windscreen
- 0.053% fail on Bonnet
- 0.011% fail on Driver's view
-
5.4% fail on
Tyres
- 3.7% fail on Tread depth (24% worse than other 2012 cars)
- 1.8% fail on Condition (34% better than other 2012 cars)
- 0.075% fail on Size/type
-
1.3% fail on
Body, chassis, structure
(47% better than other 2012 cars)
-
0.37% fail on
Transmission
(65% better than other 2012 cars)
-
0.36% fail on
Drive shafts
(65% better than other 2012 cars)
- 0.35% fail on Joints (65% better than other 2012 cars)
- 0.011% fail on Drive shaft
-
0.011% fail on
Prop shafts
- 0.011% fail on Joints
-
0.36% fail on
Drive shafts
(65% better than other 2012 cars)
-
0.34% fail on
Doors
(140% worse than other 2012 cars)
-
0.16% fail on
Driver's door
(3 times worse than other 2012 cars)
- 0.16% fail on Door condition (3 times worse than other 2012 cars)
-
0.14% fail on
Other passenger's door
(160% worse than other 2012 cars)
- 0.14% fail on Door condition (170% worse than other 2012 cars)
-
0.043% fail on
Front passenger's door
- 0.043% fail on Door condition
-
0.16% fail on
Driver's door
(3 times worse than other 2012 cars)
- 0.20% fail on Exhaust system (80% better than other 2012 cars)
- 0.20% fail on Bumpers (160% worse than other 2012 cars)
-
0.096% fail on
Body
- 0.075% fail on Other body component
- 0.011% fail on Body condition
- 0.011% fail on Panel
-
0.075% fail on
Fuel system
- 0.053% fail on Tank
- 0.021% fail on Fuel cap/sealing device
-
0.021% fail on
Integral vehicle structure
- 0.021% fail on Integral vehicle structure condition
- 0.021% fail on Undertray
-
0.011% fail on
Towbar
- 0.011% fail on Towbar condition
-
0.011% fail on
Engine mounting
- 0.011% fail on Engine mounting condition
-
0.37% fail on
Transmission
(65% better than other 2012 cars)
-
0.78% fail on
Noise, emissions and leaks
(62% better than other 2012 cars)
-
0.75% fail on
Exhaust emissions
(62% better than other 2012 cars)
-
0.46% fail on
Spark ignition
(64% better than other 2012 cars)
- 0.32% fail on Malfunction indicator lamp (51% better than other 2012 cars)
- 0.11% fail on Emissions not tested
- 0.096% fail on Catalyst emissions (81% better than other 2012 cars)
-
0.30% fail on
Compression ignition
(57% better than other 2012 cars)
- 0.16% fail on Malfunction indicator lamp (59% better than other 2012 cars)
- 0.096% fail on On or after 01/07/2008 (57% better than other 2012 cars)
- 0.032% fail on Emissions not tested
- 0.011% fail on Pre 01/07/2008 Non turbo
-
0.46% fail on
Spark ignition
(64% better than other 2012 cars)
-
0.021% fail on
Fluid leaks
(82% better than other 2012 cars)
- 0.011% fail on Engine oil leaks
- 0.011% fail on Other leaks
-
0.011% fail on
Noise suppression
- 0.011% fail on Undertray
-
0.75% fail on
Exhaust emissions
(62% better than other 2012 cars)
-
0.53% fail on
Seat belts and supplementary restraint systems
-
0.39% fail on
Seat belts
- 0.39% fail on Condition (61% worse than other 2012 cars)
- 0.14% fail on SRS malfunction indicator lamp (63% better than other 2012 cars)
-
0.39% fail on
Seat belts
-
0.33% fail on
Road Wheels
- 0.32% fail on Attachment
- 0.011% fail on Condition
-
0.23% fail on
Identification of the vehicle
- 0.23% fail on Registration plates
Read the Honest John Review