Hyundai Elantra MOT Results

Registered in 2002

48.1% pass rate

from 54 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2002 cars and highlighted areas where the Hyundai Elantra is unusually good or bad.

26% fail on Brakes
- 22% fail on Brake performance (180% worse than other 2002 cars)
  - 19% fail on Parking brake efficiency (sp) (3 times worse than other 2002 cars)
    - 19% fail on Rbt (sp) (4 times worse than other 2002 cars)
  - 5.6% fail on Service brake performance
    - 3.7% fail on Rbt
      - 3.7% fail on Service brake performance
    - 1.9% fail on Decelerometer
      - 1.9% fail on Service brake performance
  - 3.7% fail on Service Brake Efficiency (sp)
    - 3.7% fail on Rbt (sp)
      - 3.7% fail on Service brake imbalance
- 3.7% fail on Parking brake control (7 times worse than other 2002 cars)
  - 3.7% fail on Lever (7 times worse than other 2002 cars)
- 3.7% fail on Mechanical brake components
  - 3.7% fail on Brake linings and pads
    - 3.7% fail on Brake pads
  - 3.7% fail on Brake discs and drums
    - 3.7% fail on Brake discs
- 1.9% fail on Rigid brake pipes
- 1.9% fail on ABS / EBS / ESC
  - 1.9% fail on Anti-lock braking system
19% fail on Body, chassis, structure
- 15% fail on Transmission (3 times worse than other 2002 cars)
  - 13% fail on Drive shafts (2 times worse than other 2002 cars)
    - 13% fail on Joints (2 times worse than other 2002 cars)
  - 1.9% fail on Prop shafts
    - 1.9% fail on Joints
- 3.7% fail on Exhaust system
15% fail on Lamps, reflectors and electrical equipment
- 7.4% fail on Headlamps
  - 7.4% fail on Headlamp
- 7.4% fail on Stop lamp
- 3.7% fail on Headlamp aim
  - 3.7% fail on Headlamp aim
  - 1.9% fail on Headlamp aim not tested
- 3.7% fail on Registration plate lamp(s)
9.3% fail on Suspension
- 7.4% fail on Component mounting prescribed areas
- 3.7% fail on Suspension arms
  - 1.9% fail on Suspension arm
  - 1.9% fail on Ball joint
- 3.7% fail on Anti-roll bars
  - 1.9% fail on Ball joint
  - 1.9% fail on Linkage ball joints
- 1.9% fail on Wheel bearings
- 1.9% fail on Sub-frames
  - 1.9% fail on Sub-frame
9.3% fail on Noise, emissions and leaks
- 9.3% fail on Exhaust emissions
  - 9.3% fail on Spark ignition
    - 5.6% fail on Catalyst emissions
    - 3.7% fail on Malfunction indicator lamp
    - 3.7% fail on Emissions not tested
7.4% fail on Visibility
- 7.4% fail on Wipers
- 1.9% fail on Condition of glass
  - 1.9% fail on Windscreen
5.6% fail on Steering
- 3.7% fail on Steering linkage components
  - 3.7% fail on Track rod end
- 1.9% fail on Power steering
  - 1.9% fail on Pipes and hoses
5.6% fail on Tyres
- 5.6% fail on Tread depth
3.7% fail on Identification of the vehicle
- 3.7% fail on Registration plates
1.9% fail on Seat belts and supplementary restraint systems
- 1.9% fail on SRS malfunction indicator lamp