Hyundai Coupe MOT Results
Registered in 199866.3% pass rate
from 83 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1998 cars and highlighted areas where the Hyundai Coupe is unusually good or bad.
-
18% fail on
Brakes
-
13% fail on
Brake performance
-
8.4% fail on
Service Brake Efficiency (sp)
(200% worse than other 1998 cars)
-
8.4% fail on
Rbt (sp)
(2 times worse than other 1998 cars)
- 8.4% fail on Service brake imbalance (3 times worse than other 1998 cars)
-
8.4% fail on
Rbt (sp)
(2 times worse than other 1998 cars)
-
4.8% fail on
Service brake performance
-
3.6% fail on
Rbt
- 3.6% fail on Service brake performance
-
1.2% fail on
Plate brake tester
- 1.2% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
-
3.6% fail on
Rbt
-
3.6% fail on
Parking brake efficiency (sp)
- 3.6% fail on Rbt (sp)
- 1.2% fail on Brake performance not tested
-
8.4% fail on
Service Brake Efficiency (sp)
(200% worse than other 1998 cars)
-
4.8% fail on
Mechanical brake components
-
3.6% fail on
Brake linings and pads
- 3.6% fail on Brake pads
-
1.2% fail on
Brake discs and drums
- 1.2% fail on Brake discs
-
3.6% fail on
Brake linings and pads
- 3.6% fail on Rigid brake pipes
-
2.4% fail on
ABS / EBS / ESC
- 2.4% fail on Anti-lock braking system
-
1.2% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 1.2% fail on Hydraulic brake callipers
-
13% fail on
Brake performance
-
17% fail on
Suspension
- 9.6% fail on Component mounting prescribed areas
-
4.8% fail on
Anti-roll bars
- 2.4% fail on Ball joint (11 times worse than other 1998 cars)
- 2.4% fail on Linkage ball joints
-
3.6% fail on
Suspension arms
- 2.4% fail on Ball joint
- 1.2% fail on Suspension arm
- 1.2% fail on Wheel bearings
-
1.2% fail on
Springs
- 1.2% fail on Spring mounting prescribed areas
-
7.2% fail on
Lamps, reflectors and electrical equipment
-
3.6% fail on
Headlamp aim
- 2.4% fail on Headlamp aim
- 1.2% fail on Headlamp aim not tested
-
2.4% fail on
Headlamps
- 2.4% fail on Headlamp
-
2.4% fail on
Electrical equipment
- 2.4% fail on Battery(ies)
-
1.2% fail on
Hazard warning
- 1.2% fail on Switch
-
3.6% fail on
Headlamp aim
-
7.2% fail on
Body, chassis, structure
-
2.4% fail on
Integral vehicle structure
- 2.4% fail on Integral vehicle structure condition
-
2.4% fail on
Transmission
-
2.4% fail on
Drive shafts
- 2.4% fail on Joints
-
2.4% fail on
Drive shafts
-
1.2% fail on
Chassis
- 1.2% fail on Chassis condition
- 1.2% fail on Exhaust system
-
1.2% fail on
Body
- 1.2% fail on Panel
-
1.2% fail on
Doors
-
1.2% fail on
Driver's door
- 1.2% fail on Door condition
-
1.2% fail on
Driver's door
-
2.4% fail on
Integral vehicle structure
-
6.0% fail on
Visibility
- 4.8% fail on Washers
- 1.2% fail on Wipers
-
4.8% fail on
Noise, emissions and leaks
-
4.8% fail on
Exhaust emissions
-
4.8% fail on
Spark ignition
- 4.8% fail on Catalyst emissions
-
4.8% fail on
Spark ignition
-
4.8% fail on
Exhaust emissions
-
4.8% fail on
Tyres
- 2.4% fail on Tread depth
- 1.2% fail on Size/type
- 1.2% fail on Condition
-
2.4% fail on
Steering
-
2.4% fail on
Steering linkage components
- 2.4% fail on Track rod end
-
2.4% fail on
Steering linkage components
-
2.4% fail on
Seat belts and supplementary restraint systems
-
1.2% fail on
Seat belts
- 1.2% fail on Condition
- 1.2% fail on SRS malfunction indicator lamp
-
1.2% fail on
Seat belts