Hyundai Coupe MOT Results

Registered in 1997
46.2% pass rate
from 78 tests in 2017
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1997 cars and highlighted areas where the Hyundai Coupe is unusually good or bad.

  • 28% fail on Suspension
    • 14% fail on Prescribed areas (120% worse than other 1997 cars)
      • 13% fail on Component mounting (140% worse than other 1997 cars)
      • 1.3% fail on Subframe mounting
    • 5.1% fail on Suspension arms
      • 5.1% fail on Pins/bushes/ball joints
    • 5.1% fail on Wheel bearings
      • 3.8% fail on Rear
      • 2.6% fail on Front
    • 3.8% fail on Anti-roll bars
      • 2.6% fail on Linkage pins/bushes/ball joints
      • 1.3% fail on Pins/bushes/ball joints
    • 3.8% fail on Macpherson strut (10 times worse than other 1997 cars)
      • 3.8% fail on Condition (10 times worse than other 1997 cars)
    • 2.6% fail on Coil springs
      • 1.3% fail on Condition
      • 1.3% fail on Location
    • 2.6% fail on Shock absorbers
      • 2.6% fail on Condition
    • 1.3% fail on Tie bars/rods
      • 1.3% fail on Condition
    • 1.3% fail on Drive shafts
      • 1.3% fail on Front drive shafts
        • 1.3% fail on Constant velocity joints
  • 26% fail on Lamps, Reflectors and Electrical Equipment
    • 9.0% fail on Headlamp aim
    • 6.4% fail on Registration plate lamp
    • 6.4% fail on Headlamps
      • 6.4% fail on Headlamp
    • 6.4% fail on Stop lamp
    • 5.1% fail on Position lamps
      • 2.6% fail on Front lamps
      • 2.6% fail on Rear lamps
    • 2.6% fail on Rear fog lamp
      • 2.6% fail on Fog lamp
    • 1.3% fail on Battery
    • 1.3% fail on Headlamp aim not tested
  • 15% fail on Brakes
    • 12% fail on Brake performance
      • 10% fail on Front wheels (2 times worse than other 1997 cars)
      • 5.1% fail on Parking brake performance
      • 3.8% fail on Service brake performance
      • 2.6% fail on Rear wheels
      • 1.3% fail on Brake operation
    • 2.6% fail on Hydraulic systems
      • 2.6% fail on Components
        • 2.6% fail on Pipes
    • 1.3% fail on Hub components
      • 1.3% fail on Brake pads
    • 1.3% fail on Restricted movement
  • 12% fail on Driver's view of the road
    • 6.4% fail on Wipers
    • 5.1% fail on Washers
  • 10% fail on Body, Structure and General Items
    • 6.4% fail on Body condition
    • 2.6% fail on Vehicle structure
      • 2.6% fail on Chassis
    • 1.3% fail on Seats
      • 1.3% fail on Drivers
  • 9.0% fail on Exhaust, Fuel and Emissions
    • 6.4% fail on Exhaust system
    • 5.1% fail on Emissions
    • 1.3% fail on Emissions not tested
  • 3.8% fail on Steering
    • 3.8% fail on Steering system
      • 2.6% fail on Track rod end
      • 1.3% fail on Ball joint
  • 2.6% fail on Tyres
    • 1.3% fail on Size/type
    • 1.3% fail on Condition
    • 1.3% fail on Tread depth
  • 2.6% fail on Seat Belts and Supplementary Restraint Systems
    • 1.3% fail on Supplementary restraint systems
      • 1.3% fail on SRS Malfunction Indicator Lamp
    • 1.3% fail on Seat belts
      • 1.3% fail on Prescribed areas
  • 1.3% fail on Road Wheels
    • 1.3% fail on Attachment
  • 1.3% fail on Registration plates and VIN
    • 1.3% fail on Registration plate

Search Good Garages