Hyundai Accent MOT Results
Registered in 200865.6% pass rate
from 154 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2008 cars and highlighted areas where the Hyundai Accent is unusually good or bad.
-
12% fail on
Lamps, reflectors and electrical equipment
-
4.5% fail on
Headlamps
- 3.2% fail on Headlamp
- 1.9% fail on Headlamp levelling device (9 times worse than other 2008 cars)
- 4.5% fail on Stop lamp
-
2.6% fail on
Headlamp aim
- 2.6% fail on Headlamp aim
- 2.6% fail on Registration plate lamp(s)
-
4.5% fail on
Headlamps
-
11% fail on
Brakes
-
8.4% fail on
Brake performance
-
5.8% fail on
Service brake performance
-
5.8% fail on
Rbt
- 4.5% fail on Service brake performance
- 2.6% fail on Service brake imbalance (4 times worse than other 2008 cars)
-
5.8% fail on
Rbt
-
2.6% fail on
Parking brake efficiency (sp)
- 2.6% fail on Rbt (sp)
-
1.3% fail on
Parking brake performance
-
1.3% fail on
Rbt
- 1.3% fail on Parking brake performance
-
1.3% fail on
Rbt
- 0.65% fail on Brake performance not tested
-
0.65% fail on
Service Brake Efficiency (sp)
-
0.65% fail on
Rbt (sp)
- 0.65% fail on Service brake performance
-
0.65% fail on
Rbt (sp)
-
5.8% fail on
Service brake performance
-
3.2% fail on
Mechanical brake components
-
1.9% fail on
Brake linings and pads
- 1.9% fail on Brake pads
-
1.3% fail on
Brake discs and drums
- 1.3% fail on Brake discs
-
1.9% fail on
Brake linings and pads
- 2.6% fail on Rigid brake pipes
-
0.65% fail on
Parking brake control
- 0.65% fail on Lever
-
0.65% fail on
Hydraulic systems
- 0.65% fail on Reservoirs
-
8.4% fail on
Brake performance
-
9.1% fail on
Suspension
-
7.8% fail on
Suspension arms
- 6.5% fail on Ball joint (2 times worse than other 2008 cars)
- 3.2% fail on Pins and bushes
-
1.3% fail on
Anti-roll bars
- 0.65% fail on Linkage ball joints
- 0.65% fail on Ball joint dust cover
- 0.65% fail on Wheel bearings
- 0.65% fail on Component mounting prescribed areas
-
7.8% fail on
Suspension arms
-
5.8% fail on
Tyres
- 3.2% fail on Tread depth
- 2.6% fail on Condition
-
4.5% fail on
Visibility
- 3.2% fail on Wipers
- 1.3% fail on Washers
-
1.9% fail on
Body, chassis, structure
-
0.65% fail on
Integral vehicle structure
- 0.65% fail on Integral vehicle structure condition
- 0.65% fail on Exhaust system
-
0.65% fail on
Boot lid
- 0.65% fail on Boot lid condition
-
0.65% fail on
Integral vehicle structure
-
1.3% fail on
Seat belts and supplementary restraint systems
-
1.3% fail on
Seat belts
- 0.65% fail on Prescribed areas
- 0.65% fail on Condition
-
1.3% fail on
Seat belts
-
0.65% fail on
Identification of the vehicle
- 0.65% fail on Registration plates
-
0.65% fail on
Noise, emissions and leaks
-
0.65% fail on
Exhaust emissions
-
0.65% fail on
Spark ignition
- 0.65% fail on Emissions not tested
-
0.65% fail on
Spark ignition
-
0.65% fail on
Exhaust emissions