Honda Integra MOT Results
Registered in 199865.9% pass rate
from 232 tests in 2017
(27% better than other 1998 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1998 cars and highlighted areas where the Honda Integra is unusually good or bad.
-
16% fail on
Lamps, Reflectors and Electrical Equipment
- 5.6% fail on Registration plate lamp
-
3.9% fail on
Position lamps
- 3.4% fail on Front lamps
- 0.43% fail on Rear lamps
- 3.4% fail on Headlamp aim
-
3.0% fail on
Headlamps
- 3.0% fail on Headlamp
- 1.7% fail on Battery
-
1.7% fail on
Rear fog lamp
- 1.7% fail on Fog lamp
- 1.7% fail on Stop lamp
-
0.86% fail on
Direction indicators
-
0.86% fail on
Flashing type
- 0.86% fail on Individual lamps
- 0.43% fail on Side repeaters
-
0.86% fail on
Flashing type
- 0.43% fail on Horn
-
16% fail on
Brakes
-
10% fail on
Brake performance
- 6.9% fail on Front wheels (110% worse than other 1998 cars)
- 4.7% fail on Parking brake performance
- 3.9% fail on Rear wheels
- 0.86% fail on Service brake performance
- 3.4% fail on ABS
-
3.0% fail on
Hydraulic systems
-
2.2% fail on
Components
- 1.3% fail on Pipes
- 1.3% fail on Hoses
- 0.86% fail on Leaks
- 0.43% fail on Operation
-
2.2% fail on
Components
-
0.86% fail on
Parking brake
- 0.86% fail on Condition
-
0.86% fail on
Mechanical components
- 0.86% fail on Cable
- 0.86% fail on Restricted movement
-
0.43% fail on
Hub components
- 0.43% fail on Brake discs
-
10% fail on
Brake performance
-
13% fail on
Suspension
-
6.5% fail on
Prescribed areas
- 6.5% fail on Component mounting
-
4.3% fail on
Anti-roll bars
- 3.9% fail on Linkage pins/bushes/ball joints
- 0.43% fail on Pins/bushes/ball joints
- 0.43% fail on Linkage condition
-
3.0% fail on
Drive shafts
-
3.0% fail on
Front drive shafts
- 3.0% fail on Constant velocity joints
-
3.0% fail on
Front drive shafts
-
1.3% fail on
Suspension arms
- 1.3% fail on Pins/bushes/ball joints
-
0.43% fail on
Trailing arms
- 0.43% fail on Pins/bushes/ball joints
-
0.43% fail on
Tie bars/rods
- 0.43% fail on Pins/bushes/ball joints
-
0.43% fail on
Wheel bearings
- 0.43% fail on Front
- 0.43% fail on Front suspension joints
-
0.43% fail on
Shock absorbers
- 0.43% fail on Condition
-
6.5% fail on
Prescribed areas
-
7.8% fail on
Exhaust, Fuel and Emissions
- 6.0% fail on Emissions
- 3.0% fail on Exhaust system
-
6.0% fail on
Tyres
- 3.4% fail on Tread depth
- 3.0% fail on Condition
-
5.2% fail on
Steering
-
5.2% fail on
Steering system
- 4.3% fail on Steering rack (2 times worse than other 1998 cars)
- 0.43% fail on Track rod end
- 0.43% fail on Steering arm
-
0.86% fail on
Power steering
- 0.43% fail on Operation
- 0.43% fail on Rams
-
5.2% fail on
Steering system
-
3.0% fail on
Driver's view of the road
(66% better than other 1998 cars)
- 1.3% fail on Bonnet (6 times worse than other 1998 cars)
- 0.86% fail on Wipers (84% better than other 1998 cars)
- 0.86% fail on Washers
-
2.6% fail on
Seat Belts and Supplementary Restraint Systems
-
2.2% fail on
Seat belts
- 2.2% fail on Prescribed areas
-
0.43% fail on
Supplementary restraint systems
- 0.43% fail on SRS Malfunction Indicator Lamp
-
2.2% fail on
Seat belts
-
2.6% fail on
Body, Structure and General Items
- 1.3% fail on Body condition
-
0.86% fail on
Vehicle structure
- 0.86% fail on Chassis
-
0.43% fail on
Doors
- 0.43% fail on Drivers
-
1.7% fail on
Registration plates and VIN
- 1.7% fail on Registration plate