Honda CR-Z MOT Results

Registered in 2012

81.5% pass rate

from 637 tests in 2021

(41% better than other 2012 cars)

Pass rate by mileage

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Honda CR-Z is unusually good or bad.

7.1% fail on Brakes
- 3.6% fail on Mechanical brake components
  - 2.7% fail on Brake linings and pads
    - 2.7% fail on Brake pads
  - 0.94% fail on Brake discs and drums
    - 0.94% fail on Brake discs
  - 0.31% fail on Brake cables, rods, levers and linkages
    - 0.16% fail on Cable
    - 0.16% fail on Pivot
- 3.0% fail on Brake performance
  - 1.6% fail on Service brake performance
    - 1.4% fail on Rbt
      - 1.1% fail on Service brake performance
      - 0.47% fail on Service brake imbalance
    - 0.16% fail on Plate brake tester
      - 0.16% fail on Service brake performance
  - 1.4% fail on Parking brake efficiency (sp)
    - 1.4% fail on Rbt (sp)
  - 0.31% fail on Service Brake Efficiency (sp)
    - 0.31% fail on Rbt (sp)
      - 0.16% fail on Service brake performance
      - 0.16% fail on Service brake imbalance
- 0.78% fail on ABS / EBS / ESC
  - 0.63% fail on Electronic stability control
  - 0.16% fail on Anti-lock braking system
- 0.31% fail on Service brake pedal or hand lever
  - 0.31% fail on Hand lever
- 0.16% fail on Parking brake control
  - 0.16% fail on Lever
- 0.16% fail on Brake actuators (including spring brakes or hydraulic cylinders)
  - 0.16% fail on Hydraulic brake callipers
4.4% fail on Visibility
- 3.3% fail on Wipers
- 1.3% fail on Washers
- 0.16% fail on View to rear
  - 0.16% fail on Mirrors
4.4% fail on Suspension (53% better than other 2012 cars)
- 3.0% fail on Anti-roll bars (90% worse than other 2012 cars)
  - 1.4% fail on Linkage ball joint dust cover (2 times worse than other 2012 cars)
  - 0.78% fail on Linkage ball joints
  - 0.47% fail on Ball joint dust cover
  - 0.16% fail on Linkage
  - 0.16% fail on Ball joint
- 1.1% fail on Springs (75% better than other 2012 cars)
  - 1.1% fail on Coil springs (75% better than other 2012 cars)
    - 1.1% fail on Coil spring (75% better than other 2012 cars)
- 0.16% fail on Shock absorbers
- 0.16% fail on Suspension arms
  - 0.16% fail on Pins and bushes
2.8% fail on Lamps, reflectors and electrical equipment (69% better than other 2012 cars)
- 1.4% fail on Headlamp aim
  - 1.4% fail on Headlamp aim
- 0.63% fail on Registration plate lamp(s)
- 0.31% fail on Stop lamp (84% better than other 2012 cars)
- 0.31% fail on Electrical equipment
  - 0.31% fail on Battery(ies)
- 0.16% fail on Headlamps
  - 0.16% fail on Headlamp
- 0.16% fail on Rear reflectors
2.0% fail on Tyres (63% better than other 2012 cars)
- 1.1% fail on Condition (59% better than other 2012 cars)
- 0.94% fail on Tread depth (69% better than other 2012 cars)
0.63% fail on Body, chassis, structure (75% better than other 2012 cars)
- 0.31% fail on Exhaust system
- 0.16% fail on Transmission
  - 0.16% fail on Drive shafts
    - 0.16% fail on Joints
- 0.16% fail on Doors
  - 0.16% fail on Driver's door
    - 0.16% fail on Door condition
0.31% fail on Identification of the vehicle
- 0.31% fail on Registration plates
0.31% fail on Seat belts and supplementary restraint systems
- 0.16% fail on Seat belts
  - 0.16% fail on Condition
- 0.16% fail on Airbags
  - 0.16% fail on Drivers airbag
- 0.16% fail on SRS malfunction indicator lamp
0.31% fail on Noise, emissions and leaks (85% better than other 2012 cars)
- 0.31% fail on Exhaust emissions (84% better than other 2012 cars)
  - 0.31% fail on Spark ignition
    - 0.16% fail on Malfunction indicator lamp
    - 0.16% fail on Emissions not tested
0.31% fail on Road Wheels
- 0.31% fail on Attachment
0.16% fail on Steering
- 0.16% fail on Steering linkage components
  - 0.16% fail on Track rod end