Ford Sierra MOT Results
Registered in 198882.9% pass rate
from 304 tests in 2017
(51% better than other 1988 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1988 cars and highlighted areas where the Ford Sierra is unusually good or bad.
-
9.2% fail on
Lamps, Reflectors and Electrical Equipment
(53% better than other 1988 cars)
- 2.3% fail on Stop lamp
-
2.0% fail on
Rear fog lamp
- 1.6% fail on Fog lamp
- 0.33% fail on Switch
- 2.0% fail on Headlamp aim (61% better than other 1988 cars)
-
1.6% fail on
Position lamps
- 0.99% fail on Front lamps
- 0.66% fail on Rear lamps
-
1.6% fail on
Direction indicators
-
1.6% fail on
Flashing type
- 0.99% fail on Individual lamps
- 0.66% fail on Side repeaters
-
1.6% fail on
Flashing type
- 0.99% fail on Battery
- 0.99% fail on Registration plate lamp
-
0.99% fail on
Hazard warning
- 0.66% fail on Lamp
- 0.33% fail on Switch
- 0.33% fail on Tell tale
- 0.99% fail on Horn
-
0.66% fail on
Headlamps
(81% better than other 1988 cars)
- 0.66% fail on Headlamp (79% better than other 1988 cars)
-
3.9% fail on
Steering
-
2.3% fail on
Steering system
- 0.99% fail on Steering rack
- 0.99% fail on Track rod end
- 0.33% fail on Ball joint
-
0.66% fail on
Steering control
- 0.33% fail on Steering column
-
0.33% fail on
Steering coupling
- 0.33% fail on Flexible coupling
- 0.66% fail on Locking devices (6 times worse than other 1988 cars)
-
0.33% fail on
Power steering
- 0.33% fail on Other components
-
2.3% fail on
Steering system
-
3.9% fail on
Suspension
(70% better than other 1988 cars)
-
2.0% fail on
Prescribed areas
(65% better than other 1988 cars)
- 1.3% fail on Component mounting (71% better than other 1988 cars)
- 0.66% fail on Subframe mounting
-
0.99% fail on
Coil springs
- 0.99% fail on Condition
-
0.66% fail on
Drive shafts
-
0.33% fail on
Front drive shafts
- 0.33% fail on Constant velocity joints
-
0.33% fail on
Any drive shaft which is part of the suspension
- 0.33% fail on Drive shafts
-
0.33% fail on
Front drive shafts
-
0.33% fail on
Suspension arms
- 0.33% fail on Pins/bushes/ball joints
-
0.33% fail on
Wheel bearings
- 0.33% fail on Front
- 0.33% fail on Front suspension joints
-
2.0% fail on
Prescribed areas
(65% better than other 1988 cars)
-
3.9% fail on
Exhaust, Fuel and Emissions
(53% better than other 1988 cars)
- 2.0% fail on Emissions
- 1.6% fail on Exhaust system
-
0.66% fail on
Fuel system
- 0.33% fail on Tank
- 0.33% fail on Cap
- 0.33% fail on Emissions not tested
-
3.6% fail on
Brakes
(73% better than other 1988 cars)
-
3.0% fail on
Brake performance
(66% better than other 1988 cars)
- 1.3% fail on Front wheels
- 0.66% fail on Rear wheels (83% better than other 1988 cars)
- 0.66% fail on Parking brake performance (81% better than other 1988 cars)
- 0.33% fail on Brake imbalance
-
0.99% fail on
Hydraulic systems
(78% better than other 1988 cars)
-
0.99% fail on
Components
(74% better than other 1988 cars)
- 0.99% fail on Pipes
-
0.99% fail on
Components
(74% better than other 1988 cars)
-
0.33% fail on
Air and vacuum systems
-
0.33% fail on
Components
- 0.33% fail on Servos
-
0.33% fail on
Components
-
3.0% fail on
Brake performance
(66% better than other 1988 cars)
-
3.3% fail on
Driver's view of the road
(60% better than other 1988 cars)
- 1.6% fail on Wipers
- 1.6% fail on Washers
-
1.6% fail on
Seat Belts and Supplementary Restraint Systems
-
1.6% fail on
Seat belts
- 1.6% fail on Prescribed areas
-
1.6% fail on
Seat belts
-
1.6% fail on
Body, Structure and General Items
(66% better than other 1988 cars)
-
0.99% fail on
Vehicle structure
- 0.99% fail on Chassis
- 0.33% fail on Body condition
-
0.33% fail on
Seats
- 0.33% fail on Drivers
-
0.99% fail on
Vehicle structure
-
1.3% fail on
Tyres
- 0.66% fail on Condition
- 0.33% fail on Tread depth
- 0.33% fail on Valve stem
-
0.33% fail on
Road Wheels
- 0.33% fail on Attachment
-
0.33% fail on
Registration plates and VIN
- 0.33% fail on Registration plate